.. program:: qvm-prefs :program:`qvm-prefs` -- List/set various per-VM properties ========================================================== Synopsis -------- :command:`qvm-prefs` qvm-prefs [-h] [--verbose] [--quiet] [--force-root] [--help-properties] *VMNAME* [*PROPERTY* [*VALUE* \| --delete \| --default ]] Options ------- .. option:: --help, -h Show help message and exit. .. option:: --help-properties List available properties with short descriptions and exit. .. option:: --verbose, -v Increase verbosity. .. option:: --quiet, -q Decrease verbosity. .. option:: --unset, --default, --delete, -D Unset the property. If is has default value, it will be used instead. .. option:: --get, -g Ignored; for compatibility with older scripts. .. option:: --set, -s Ignored; for compatibility with older scripts. Common properties ================= This list is non-exhaustive. For authoritative listing, see :option:`--help-properties` and documentation of the source code. .. warning:: This list is from the core2. It is wrong in many cases, some of them obvious, some of them not. include_in_backups Accepted values: ``True``, ``False`` Control whenever this VM will be included in backups by default (for now works only in qubes-manager). You can always manually select or deselect any VM for backup. pcidevs PCI devices assigned to the VM. Should be edited using qvm-pci tool. pci_strictreset Accepted values: ``True``, ``False`` Control whether prevent assigning to VM a device which does not support any reset method. Generally such devices should not be assigned to any VM, because there will be no way to reset device state after VM shutdown, so the device could attack next VM to which it will be assigned. But in some cases it could make sense - for example when the VM to which it is assigned is trusted one, or is running all the time. pci_e820_host Accepted values: ``True``, ``False`` Give VM with PCI devices a memory map (e820) of the host. This is required for some devices to properly resolve conflicts in address space. This option is enabled by default for VMs with PCI devices and have no effect for VMs without devices. label Accepted values: ``red``, ``orange``, ``yellow``, ``green``, ``gray``, ``blue``, ``purple``, ``black`` Color of VM label (icon, appmenus, windows border). If VM is running, change will be applied at first VM restart. netvm Accepted values: netvm name, ``default``, ``none`` To which NetVM connect. Setting to ``default`` will follow system-global default NetVM (managed by qubes-prefs). Setting to ``none`` will disable networking in this VM. dispvm_netvm Accepted values: netvm name, ``default``, ``none`` Which NetVM should be used for Disposable VMs started by this one. ``default`` is to use the same NetVM as the VM itself. maxmem Accepted values: memory size in MB Maximum memory size available for this VM. Dynamic memory management (aka qmemman) will not be able to balloon over this limit. For VMs with qmemman disabled, this will be overridden by *memory* property (at VM startup). memory Accepted values: memory size in MB Initial memory size for VM. This should be large enough to allow VM startup - before qmemman starts managing memory for this VM. For VM with qmemman disabled, this is static memory size. kernel Accepted values: kernel version, ``default``, ``none`` Kernel version to use (only for PV VMs). Available kernel versions will be listed when no value given (there are in /var/lib/qubes/vm-kernels). Setting to ``default`` will follow system-global default kernel (managed via qubes-prefs). Setting to ``none`` will use "kernels" subdir in VM directory - this allows having VM-specific kernel; also this the only case when /lib/modules is writable from within VM. template Accepted values: TemplateVM name TemplateVM on which VM base. It can be changed only when VM isn't running. vcpus Accepted values: no of CPUs Number of CPU (cores) available to VM. Some VM types (eg DispVM) will not work properly with more than one CPU. kernelopts Accepted values: string, ``default`` VM kernel parameters (available only for PV VMs). This can be used to workaround some hardware specific problems (eg for NetVM). Setting to ``default`` will use some reasonable defaults (currently different for VMs with PCI devices and without). For VM without PCI devices ``default`` option means inherit this value from the VM template (if any). Some helpful options (for debugging purposes): ``earlyprintk=xen``, ``init=/bin/bash`` name Accepted values: alphanumerical name Name of the VM. Can be only changed when VM isn't running. drive Accepted values: [hd:\|cdrom:][backend-vm:]path Additional drive for the VM (available only for HVMs). This can be used to attach installation image. ``path`` can be file or physical device (eg. :file:`/dev/sr0`). The same syntax can be used in :option:`qvm-start --drive` - to attach drive only temporarily. mac Accepted values: MAC address, ``auto`` Can be used to force specific of virtual ethernet card in the VM. Setting to ``auto`` will use automatic-generated MAC - based on VM id. Especially useful when licensing requires a static MAC address. For template-based HVM ``auto`` mode means to clone template MAC. default_user Accepted values: username Default user used by :manpage:`qvm-run(1)`. Note that it make sense only on non-standard template, as the standard one always have "user" account. debug Accepted values: ``on``, ``off`` Enables debug mode for VM. This can be used to turn on/off verbose logging in many Qubes components at once (gui virtualization, VM kernel, some other services). For template-based HVM, enabling debug mode also disables automatic reset :file:`root.img` (actually :file:`volatile.img`) before each VM startup, so changes made to root filesystem stays intact. To force reset :file:`root.img` when debug mode enabled, either change something in the template (simple start+stop will do, even touch its :file:`root.img` is enough), or remove VM's :file:`volatile.img` (check the path with :manpage:`qvm-prefs(1)`). qrexec_installed Accepted values: ``True``, ``False`` This HVM have qrexec agent installed. When VM have qrexec agent installed, one can use qvm-run to start VM process, VM will benefit from Qubes RPC services (like file copy, or inter-vm clipboard). This option will be automatically turned on during Qubes Windows Tools installation, but if you install qrexec agent in some other OS, you need to turn this option on manually. guiagent_installed Accepted values: ``True``, ``False`` This HVM have gui agent installed. This option disables full screen GUI virtualization and enables per-window seemless GUI mode. This option will be automatically turned on during Qubes Windows Tools installation, but if you install Qubes gui agent in some other OS, you need to turn this option on manually. You can turn this option off to troubleshoot some early HVM OS boot problems (enter safe mode etc), but the option will be automatically enabled at first VM normal startup (and will take effect from the next startup). .. note:: when Windows GUI agent is installed in the VM, SVGA device (used to full screen video) is disabled, so even if you disable this option, you will not get functional full desktop access (on normal VM startup). Use some other means for that (VNC, RDP or so). autostart Accepted values: ``True``, ``False`` Start the VM during system startup. The default netvm is autostarted regardless of this setting. timezone Accepted values: ``localtime``, time offset in seconds Set emulated HVM clock timezone. Use ``localtime`` (the default) to use the same time as dom0 have. Note that HVM will get only clock value, not the timezone itself, so if you use ``localtime`` setting, OS inside of HVM should also be configured to treat hardware clock as local time (and have proper timezone set). Authors ------- | Joanna Rutkowska | Rafal Wojtczuk | Marek Marczykowski | Wojtek Porczyk .. vim: ts=3 sw=3 et tw=80