If any object is leaked, QubesTestCase.cleanup_gc() raises an exception,
which have leaked objects list referenced in its traceback. This happens
after cleanup_traceback(), so isn't cleaned, causing cleanup_gc() fail
for all the further tests in the same test run.
Avoid this, by dropping list just before checking if any object is
leaked.
When a VM (or its template) does not explicitly set a qrexec_timeout,
fall back to a global default_qrexec_timeout (with default value 60),
instead of hardcoding the fallback value to 60.
This makes it easy to set a higher timeout for the whole system, which
helps users who habitually launch applications from several (not yet
started) VMs at the same time. 60 seconds can be too short for that.
qvm-sync-clock no longer fetches time from the network, by design.
So, lets not break clockvm's time and check only if everything else
correctly synchronize with it.
It isn't enough to wait for window to disappear, the service may still
be running. And if it is, test cleanup logic will complain about FD
leak.
To avoid deadlock on some test failure, do it with a timeout.
volume.path and volume.export() refer to the same thing in lvm_thin and
'file', but not in file-reflink (where volume.path is the -dirty.img,
which doesn't exist if the volume is not started).
Use the file-reflink storage driver if /var/lib/qubes is on a filesystem
that supports reflinks, e.g. when the btrfs layout was selected in
Anaconda. If it doesn't support reflinks (or if detection fails, e.g. in
an unprivileged test environment), use 'file' as before.
System tests are fragile for any object leaks, especially those holding
open files. Instead of wrapping all tests with try/finally removing
those local variables (as done in qubes.tests.integ.backup for example),
apply generic solution: clean all traceback objects from local
variables. Those aren't used to generate text report by either test
runner (qubes.tests.run and nose2). If one wants to break into debugger
and inspect tracebacks interactively, needs to comment out call to
cleanup_traceback.
* qubesos/pr/228:
storage/lvm: filter out warning about intended over-provisioning
tests: fix getting kernel package version inside VM
tests/extra: add start_guid option to VMWrapper
vm/qubesvm: fire 'domain-start-failed' event even if fail was early
vm/qubesvm: check if all required devices are available before start
storage/lvm: fix reporting lvm command error
storage/lvm: save pool's revision_to_keep property
Multiple properties are related to system installed inside the VM, so it
makes sense to have them the same for all the VMs based on the same
template. Modify default value getter to first try get the value from a
template (if any) and only if it fails, fallback to original default
value.
This change is made to those properties:
- default_user (it was already this way)
- kernel
- kernelopts
- maxmem
- memory
- qrexec_timeout
- vcpus
- virt_mode
This is especially useful for manually installed templates (like
Windows).
Related to QubesOS/qubes-issues#3585
Handle 'os' feature - if it's Windows, then set rpc-clipboard feature.
Handle 'gui-emulated' feature - request for specifically stubdomain GUI.
With 'gui' feature it is only possible to enable gui-agent based on, or
disable GUI completely.
Handle 'default-user' - verify it for weird characters and set
'default_user' property (if wasn't already set).
QubesOS/qubes-issues#3585
* lvm-snapshots:
tests: fix handling app.pools iteration
storage/lvm: add repr(ThinPool) for more meaningful test reports
tests: adjust for variable volume path
api/admin: expose volume path in admin.vm.volume.Info
tests: LVM: import, list_volumes, volatile volume, snapshot volume
tests: collect all SIGCHLD before cleaning event loop
storage/lvm: use temporary volume for data import
tests: ThinVolume.revert()
tests: LVM volume naming migration, and new naming in general
storage/lvm: improve handling interrupted commit
Since (for LVM at least) path is dynamic now, add information about it
to volume info. This is not very useful outside of dom0, but in dom0 it
can be very useful for various scripts.
This will disclose current volume revision id, but it is already
possible to deduce it from snapshots list.
Do not write directly to main volume, instead create temporary volume
and only commit it to the main one when operation is finished. This
solve multiple problems:
- import operation can be aborted, without data loss
- importing new data over existing volume will not leave traces of
previous content - especially when importing smaller volume to bigger
one
- import operation can be reverted - it create separate revision,
similar to start/stop
- easier to prevent qube from starting during import operation
- template still can be used when importing new version
QubesOS/qubes-issues#2256
First rename volume to backup revision, regardless of revisions_to_keep,
then rename -snap to current volume. And only then remove backup
revision (if exceed revisions_to_keep). This way even if commit
operation is interrupted, there is still a volume with the data.
This requires also adjusting few functions to actually fallback to most
recent backup revision if the current volume isn't found - create
_vid_current property for this purpose.
Also, use -snap volume for clone operation and commit it normally later.
This makes it safer to interrupt or even revert.
QubesOS/qubes-issues#2256
is_outdated() may be not supported by given volume pool driver. In that
case skip is_outdated information, instead of crashing the call.
FixesQubesOS/qubes-issues#3767
Before waiting for remaining tasks on event loop (including libvirt
events), make sure all destroyed objects are really destroyed. This is
especially important for libvirt connections, which gets cleaned up only
when appropriate destructor (__del__) register a cleanup callback and it
gets called by the loop.
Use VM's actual IP address as a gateway for other VMs, instead of
hardcoded link-local address. This is important for sys-net generated
ICMP diagnostics packets - those must _not_ have link-local source
address, otherwise wouldn't be properly forwarded back to the right VM.
* devel-storage-fixes:
storage/file: use proper exception instead of assert
storage/file: import data into temporary volume
storage/lvm: check for LVM LV existence and type when creating ThinPool
storage/lvm: fix size reporting just after creating LV
Similar to LVM changes, this fixes/improves multiple things:
- no old data visible in the volume
- failed import do not leave broken volume
- parially imported data not visible to running VM
QubesOS/qubes-issues#3169
* storage-properties:
storage: use None for size/usage properties if unknown
tests: call search_pool_containing_dir with various dirs and pools
storage: make DirectoryThinPool helper less verbose, add sudo
api/admin: add 'included_in' to admin.pool.Info call
storage: add Pool.included_in() method for checking nested pools
storage: move and generalize RootThinPool helper class
storage/kernels: refuse changes to 'rw' and 'revisions_to_keep'
api/admin: implement admin.vm.volume.Set.rw method
api/admin: include 'revisions_to_keep' and 'is_outdated' in volume info
Since Volume.is_outdated() is a method, not a property, add a function
for handling serialization. And at the same time, fix None serialization
(applicable to 'source' property).
QubesOS/qubes-issues#3256
Some handlers may want to call into other VMs (or even the one asking),
but vm.run() functions are coroutines, so needs to be called from
another coroutine. Allow for that.
Also fix typo in documentation.
Some kernels (like pvgrub2) may not provide modules.img and it isn't an
error. Don't break VM startup in that case, skip that device instead.
FixesQubesOS/qubes-issues#3563
* qubesos/pr/190:
Missed one test, adding default-user in assert for test test_621_qdb_vm_with_network in TC_90
replaced underscore by dash and update test accordingly
Updated assert content for test_620_qdb_standalone in TC_90_QubesVM
Added the default_user property from the Qube to the qubesdb so it is available when starting X. This is the 1st part of a fix for issue https://github.com/QubesOS/qubes-issues/issues/2372
This adds the file-reflink storage driver. It is never selected
automatically for pool creation, especially not the creation of
'varlibqubes' (though it can be used if set up manually).
The code is quite small:
reflink.py lvm.py file.py + block-snapshot
sloccount 334 lines 447 (134%) 570 (171%)
Background: btrfs and XFS (but not yet ZFS) support instant copies of
individual files through the 'FICLONE' ioctl behind 'cp --reflink'.
Which file-reflink uses to snapshot VM image files without an extra
device-mapper layer. All the snapshots are essentially freestanding;
there's no functional origin vs. snapshot distinction.
In contrast to 'file'-on-btrfs, file-reflink inherently avoids
CoW-on-CoW. Which is a bigger issue now on R4.0, where even AppVMs'
private volumes are CoW. (And turning off the lower, filesystem-level
CoW for 'file'-on-btrfs images would turn off data checksums too, i.e.
protection against bit rot.)
Also in contrast to 'file', all storage features are supported,
including
- any number of revisions_to_keep
- volume.revert()
- volume.is_outdated
- online fstrim/discard
Example tree of a file-reflink pool - *-dirty.img are connected to Xen:
- /var/lib/testpool/appvms/foo/volatile-dirty.img
- /var/lib/testpool/appvms/foo/root-dirty.img
- /var/lib/testpool/appvms/foo/root.img
- /var/lib/testpool/appvms/foo/private-dirty.img
- /var/lib/testpool/appvms/foo/private.img
- /var/lib/testpool/appvms/foo/private.img@2018-01-02T03:04:05Z
- /var/lib/testpool/appvms/foo/private.img@2018-01-02T04:05:06Z
- /var/lib/testpool/appvms/foo/private.img@2018-01-02T05:06:07Z
- /var/lib/testpool/appvms/bar/...
- /var/lib/testpool/appvms/...
- /var/lib/testpool/template-vms/fedora-26/...
- /var/lib/testpool/template-vms/...
It looks similar to a 'file' pool tree, and in fact file-reflink is
drop-in compatible:
$ qvm-shutdown --all --wait
$ systemctl stop qubesd
$ sed 's/ driver="file"/ driver="file-reflink"/g' -i.bak /var/lib/qubes/qubes.xml
$ systemctl start qubesd
$ sudo rm -f /path/to/pool/*/*/*-cow.img*
If the user tries to create a fresh file-reflink pool on a filesystem
that doesn't support reflinks, qvm-pool will abort and mention the
'setup_check=no' option. Which can be passed to force a fallback on
regular sparse copies, with of course lots of time/space overhead. The
same fallback code is also used when initially cloning a VM from a
foreign pool, or from another file-reflink pool on a different
mountpoint.
'journalctl -fu qubesd' will show all file-reflink copy/rename/remove
operations on VM creation/startup/shutdown/etc.
* qubesos/pr/187:
Don't fail create/clone if /var/lib/qubes/TYPE/NAME/ exists
Make 'qvm-volume revert' really use the latest revision
Fix wrong mocks of Volume.revisions
* qubesos/pr/185:
vm: remove doc for non-existing event `monitor-layout-change`
vm: include tag/feature name in event name
events: add support for wildcard event handlers
* qubesos/pr/180:
vm/qubesvm: default to PVH unless PCI devices are assigned
vm/qubesvm: expose 'start_time' property over Admin API
vm/qubesvm: revert backup_timestamp to '%s' format
doc: link qvm-device man page for qvm-block, qvm-pci, qvm-usb
Human readable format `str(datetime.datetime)` is a nightmare for Admin
API level communication. Especially setting the property in a format
that it was read was not supported, and handling such format in
untrusted input handling code is a bad idea. Revert to a simple intiger
format.
Rename events:
- domain-feature-set -> domain-feature-set:feature
- domain-feature-delete -> domain-feature-delete:feature
- domain-tag-add -> domain-tag-add:tag
- domain-tag-delete -> domain-tag-delete:tag
Make it consistent with property-* events. It makes more sense to
include tag/feature name in event name, so handler can watch a single
tag/feature - which is the most common case. Otherwise, most handlers
would begin with `if feature == '...'` anyway, wasting time on most
events.
In cases where multiple features/tags should be handled by a single
handler, it is now possible to register a handler with wildcard, for
example `domain-feature-set:*`.
Support registering handlers for more flexible wildcard events: not only
'*', but also 'something*'. This allows to register handlers for
'property-set:*' and such.
Load integration tests from outside of core-admin repository, through
entry points.
Create wrapper for VM object to keep very basic compatibility with tests
written for core2. This means if test use only basic functionality
(vm.start(), vm.run()), the same test will work for both core2 and
core3. This is especially important for app-* repositories, where the
same version serves multiple Qubes branches.
This also hides asyncio usage from tests writer.
See QubesOS/qubes-issues#1800 for details on original feature.
Test base functions of dom0 module (creating VM, setting property) and
configuring system inside of VM (through DispVM). The later is done for
each available template (the process use salt installed in that
template, not copied from dom0).
QubesOS/qubes-issues#3316
When dom0 do not provide the kernel, it should also not set kernel
command line in libvirt config. Otherwise qemu in stubdom fails to start
because it get -append option without -kernel, which is illegal
configuration.
FixesQubesOS/qubes-issues#3339
