Ask qubesd for admin.vm.Console call. This allows to intercept it with
admin-permission event. While at it, extract tty path extraction to
python, where libvirt domain object is already available.
FixesQubesOS/qubes-issues#5030
If Firefox is started for the first time, it will open both requested
page and its welcome page. This means closing the window will trigger a
confirmation about closing multiple tabs. Handle this.
If unmount is going to fail, let it do so explicitly, instead of hiding
the failure now, and observing it later at rmdir.
And if it fails, lets report what process is using that mount point.
Xenial environment has much newer GTK/Glib. For those test to run, few
more changes are needed:
- relevant GTK packages installed
- X server running (otherwise GTK terminate the process on module
import...)
- enable system side packages in virtualenv set by travis
If kernel package ships default-kernelopts-common.txt file, use that
instead of hardcoded Linux-specific options.
For Linux kernel it may include xen_scrub_pages=0 option, but only if
initrd shipped with this kernel re-enable this option later.
QubesOS/qubes-issues#4839QubesOS/qubes-issues#4736
Pool setup/destroy may be a time consuming operation, allow them to be
asynchronous. Fortunately add_pool and remove_pool are used only through
Admin API, so the change does not require modification of other
components.
If default-kernelopts-pci.txt is present, it will override default
built-in kernelopts for the VMs with PCI device assigned.
Similarly if default-kernelopts-nopci.txt is present, it will override
default kernelopts for VMs without PCI devices.
For template-based VMs, kernelopts of the template takes precedence over
default-kernelopts-nopci.txt but not default-kernelopts-pci.txt.
FixesQubesOS/qubes-issues#4839
Look for the first updateable template up in the template chain, instead
of going just one level up. Especially this applies to
DispVM -> AppVM -> TemplateVM case.
If DispVM reports available updates, 'updates-available'
flag should be set on relevant TemplateVM, not AppVM (*-dvm).
Include test for the new case.
FixesQubesOS/qubes-issues#3736
The user of ExtraTestCase don't need to know anything about asyncio.
vm.run().wait() normally is a coroutine, but provide a wrapper that
handle asyncio.
This fixes FD leak in input proxy tests.
Since 4dc86310 "Use maxmem=0 to disable qmemman, add more automation to
it" meminfo-writer service is not accessible directly. maxmem property
is used to encode memory management instead.
- Two new methods: .features.check_with_adminvm() and
.check_with_template_and_adminvm(). Common code refactored.
- Two new AdminAPI calls to take advantage of the methods:
- admin.vm.feature.CheckWithAdminVM
- admin.vm.feature.CheckWithTemplateAndAdminVM
- Features manager moved to separate module in anticipation of features
on app object in R5.0. The attribute Features.vm renamed to
Features.subject.
- Documentation, tests.
First install test-pkg-1.0, then add test-pkg-1.1 to repo and check if
updates-available flag is set. Then install updates and check if the
flag is cleared.
QubesOS/qubes-issues#2009
The new property is meant for management stack (Salt) to set which DVM
template should be used to maintain given VM. Since the DispVM based on
it will be given ultimate control over target VM (qubes.VMShell
service), it should be trusted. The one pointed to by default_dispvm
not necessary is one.
The property defaults to the value from the template (if any), and then
to a global management_dispvm property. By default it is set to None.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Use maxmem=0 for disabling dynamic memory balance, instead of cryptic
service.meminfo-writer feature. Under the hood, meminfo-writer service
is also set based on maxmem property (directly in qubesdb, not
vm.features dict).
Having this as a property (not "feature"), allow to have sensible
handling of default value. Specifically, disable it automatically if
otherwise it would crash a VM. This is the case for:
- domain with PCI devices (PoD is not supported by Xen then)
- domain without balloon driver and/or meminfo-writer service
The check for the latter is heuristic (assume presence of 'qrexec' also
can indicate balloon driver support), but it is true for currently
supported systems.
This also allows more reliable control of libvirt config: do not set
memory != maxmem, unless qmemman is enabled.
memory != maxmem only makes sense if qmemman for given domain is
enabled. Besides wasting some domain resources for extra page tables
etc, for HVM domains this is harmful, because maxmem-memory difference
is made of Popupate-on-Demand pool, which - when depleted - will kill
the domain. This means domain without balloon driver will die as soon
as will try to use more than initial memory - but without balloon driver
it sees maxmem memory and doesn't know about the lower limit.
FixesQubesOS/qubes-issues#4135
It makes a lot of sense to call long-running operations in that event
handler, including calling back into the VM. Allow that by using
fire_event_async, not just fire_event.
Also, document the event.
Commit 15cf593bc5 "tests/lvm: fix checking
lvm pool existence" attempted to fix handling '-' in pool name by using
/dev/VG/LV symlink. But those are not created for thin pools. Change
back to /dev/mapper, but include '-' mangling.
Related QubesOS/qubes-issues#4332
Try to collect more details about why the test failed. This will help
only if qvm-open-in-dvm exist early. On the other hand, if it hang, or
remote side fails to find the right editor (which results in GUI error
message), this change will not provide any more details.
First boot of whonix-ws based VM take extended period of time, because
a lot of files needs to be copied to private volume. This takes even
more time, when verbose logging through console is enabled. Extend the
timeout for that.
Cleanup VMs in template reverse topological order, not network one.
Network can be set to None to break dependency, but template can't. For
netvm to be changed, kill VMs first (kill doesn't check network
dependency), so netvm change will not trigger side effects (runtime
change, which could fail).
This fixes cleanup for tests creating custom templates - previously
order was undefined and if template was tried removed before its child
VMs, it fails. All the relevant files were removed later anyway, but it
lead to python objects leaks.
First unregister the domain from collection, and only then call
remove_from_disk(). Removing it from collection prevent further calls
being made to it. Or if anything else keep a reference to it (for
example as a netvm), then abort the operation.
Additionally this makes it unnecessary to take startup lock when
cleaning it up in tests.
LVM operations can take significant amount of time. This is especially
visible when stopping a VM (`vm.storage.stop()`) - in that time the
whole qubesd freeze for about 2 seconds.
Fix this by making all the ThinVolume methods a coroutines (where
supported). Each public coroutine is also wrapped with locking on
volume._lock to avoid concurrency-related problems.
This all also require changing internal helper functions to
coroutines. There are two functions that still needs to be called from
non-coroutine call sites:
- init_cache/reset_cache (initial cache fill, ThinPool.setup())
- qubes_lvm (ThinVolume.export()
So, those two functions need to live in two variants. Extract its common
code to separate functions to reduce code duplications.
FixesQubesOS/qubes-issues#4283
Both vm.create_on_disk() and vm.start() are coroutines. Tests in this
class didn't run them, so basically didn't test anything.
Wrap couroutine calls with self.loop.run_until_complete().
Additionally, don't fail if LVM pool is named differently.
In that case, the test is rather sily, as it probably use the same pool
for source and destination (operation already tested elsewhere). But it
isn't a reason for failing the test.
Support 'supported-service.*' features requests coming from VMs. Set
such features directly (allow only value '1') and remove any not
reported in given call. This way uninstalling package providing given
service will automatically remove related 'supported-service...'
feature.
FixesQubesOS/qubes-issues#4402
Make sure events are sent to specific window found with xdotool search,
not the one having the focus. In case of Whonix, it can be first
connection wizard or whonixcheck report.
Searching based on class is used in many tests, searching by class, not
only by name in wait_for_window will allow to reduce code duplication.
While at it, improve it additionally:
- avoid active waiting for window and use `xdotool search --sync` instead
- return found window id
- add wait_for_window_coro() for use where coroutine is needed
- when waiting for window to disappear, check window id once and wait
for that particular window to disappear (avoid xdotool race
conditions on window enumeration)
Besides reducing code duplication, this also move various xdotool
imperfections handling into one place.
Allow removing VMs based on multiple prefixes at once. Removing them
separately doesn't handle all the dependencies (default_netvm, netvm)
correctly. This is needed for backup compatibility tests, where VMs are
created with `test-` prefix and `disp-tests-`. Additionally backup code
will create `disp-no-netvm`, which also may need to be removed.
If QUBES_TEST_TEMPLATES or QUBES_TEST_LOAD_ALL is set, create testcases
on modules import, instead of waiting until `load_tests` is called.
The `QUBES_TEST_TEMPLATES` doesn't require `qubes.xml` access, so it
should be safe to do regardless of the environment. The
`QUBES_TEST_LOAD_ALL` force loading tests (and reading `qubes.xml`)
regardless.
This is useful for test runners not supporting load_tests protocol. Or
with limited support - for example both default `unittest` runner and
`nose2` can either use load_tests protocol _or_ select individual tests.
Setting any of those variable allow to run a single test with those
runners.
With this feature used together load_tests protocol, tests could be
registered twice. Avoid this by not listing already defined test classes
in create_testcases_for_templates (according to load_tests protocol,
those should already be registered).
Allow easily list templates to be tested, without enumerating all the
test classes. This is especially useful with nose2 runner which can't
use load tests protocol _and_ select subset of tests.
If any object is leaked, QubesTestCase.cleanup_gc() raises an exception,
which have leaked objects list referenced in its traceback. This happens
after cleanup_traceback(), so isn't cleaned, causing cleanup_gc() fail
for all the further tests in the same test run.
Avoid this, by dropping list just before checking if any object is
leaked.
When a VM (or its template) does not explicitly set a qrexec_timeout,
fall back to a global default_qrexec_timeout (with default value 60),
instead of hardcoding the fallback value to 60.
This makes it easy to set a higher timeout for the whole system, which
helps users who habitually launch applications from several (not yet
started) VMs at the same time. 60 seconds can be too short for that.
qvm-sync-clock no longer fetches time from the network, by design.
So, lets not break clockvm's time and check only if everything else
correctly synchronize with it.
It isn't enough to wait for window to disappear, the service may still
be running. And if it is, test cleanup logic will complain about FD
leak.
To avoid deadlock on some test failure, do it with a timeout.
volume.path and volume.export() refer to the same thing in lvm_thin and
'file', but not in file-reflink (where volume.path is the -dirty.img,
which doesn't exist if the volume is not started).
Use the file-reflink storage driver if /var/lib/qubes is on a filesystem
that supports reflinks, e.g. when the btrfs layout was selected in
Anaconda. If it doesn't support reflinks (or if detection fails, e.g. in
an unprivileged test environment), use 'file' as before.
System tests are fragile for any object leaks, especially those holding
open files. Instead of wrapping all tests with try/finally removing
those local variables (as done in qubes.tests.integ.backup for example),
apply generic solution: clean all traceback objects from local
variables. Those aren't used to generate text report by either test
runner (qubes.tests.run and nose2). If one wants to break into debugger
and inspect tracebacks interactively, needs to comment out call to
cleanup_traceback.
* qubesos/pr/228:
storage/lvm: filter out warning about intended over-provisioning
tests: fix getting kernel package version inside VM
tests/extra: add start_guid option to VMWrapper
vm/qubesvm: fire 'domain-start-failed' event even if fail was early
vm/qubesvm: check if all required devices are available before start
storage/lvm: fix reporting lvm command error
storage/lvm: save pool's revision_to_keep property
Multiple properties are related to system installed inside the VM, so it
makes sense to have them the same for all the VMs based on the same
template. Modify default value getter to first try get the value from a
template (if any) and only if it fails, fallback to original default
value.
This change is made to those properties:
- default_user (it was already this way)
- kernel
- kernelopts
- maxmem
- memory
- qrexec_timeout
- vcpus
- virt_mode
This is especially useful for manually installed templates (like
Windows).
Related to QubesOS/qubes-issues#3585
Handle 'os' feature - if it's Windows, then set rpc-clipboard feature.
Handle 'gui-emulated' feature - request for specifically stubdomain GUI.
With 'gui' feature it is only possible to enable gui-agent based on, or
disable GUI completely.
Handle 'default-user' - verify it for weird characters and set
'default_user' property (if wasn't already set).
QubesOS/qubes-issues#3585
* lvm-snapshots:
tests: fix handling app.pools iteration
storage/lvm: add repr(ThinPool) for more meaningful test reports
tests: adjust for variable volume path
api/admin: expose volume path in admin.vm.volume.Info
tests: LVM: import, list_volumes, volatile volume, snapshot volume
tests: collect all SIGCHLD before cleaning event loop
storage/lvm: use temporary volume for data import
tests: ThinVolume.revert()
tests: LVM volume naming migration, and new naming in general
storage/lvm: improve handling interrupted commit
Since (for LVM at least) path is dynamic now, add information about it
to volume info. This is not very useful outside of dom0, but in dom0 it
can be very useful for various scripts.
This will disclose current volume revision id, but it is already
possible to deduce it from snapshots list.
Do not write directly to main volume, instead create temporary volume
and only commit it to the main one when operation is finished. This
solve multiple problems:
- import operation can be aborted, without data loss
- importing new data over existing volume will not leave traces of
previous content - especially when importing smaller volume to bigger
one
- import operation can be reverted - it create separate revision,
similar to start/stop
- easier to prevent qube from starting during import operation
- template still can be used when importing new version
QubesOS/qubes-issues#2256
First rename volume to backup revision, regardless of revisions_to_keep,
then rename -snap to current volume. And only then remove backup
revision (if exceed revisions_to_keep). This way even if commit
operation is interrupted, there is still a volume with the data.
This requires also adjusting few functions to actually fallback to most
recent backup revision if the current volume isn't found - create
_vid_current property for this purpose.
Also, use -snap volume for clone operation and commit it normally later.
This makes it safer to interrupt or even revert.
QubesOS/qubes-issues#2256
is_outdated() may be not supported by given volume pool driver. In that
case skip is_outdated information, instead of crashing the call.
FixesQubesOS/qubes-issues#3767
Before waiting for remaining tasks on event loop (including libvirt
events), make sure all destroyed objects are really destroyed. This is
especially important for libvirt connections, which gets cleaned up only
when appropriate destructor (__del__) register a cleanup callback and it
gets called by the loop.
Use VM's actual IP address as a gateway for other VMs, instead of
hardcoded link-local address. This is important for sys-net generated
ICMP diagnostics packets - those must _not_ have link-local source
address, otherwise wouldn't be properly forwarded back to the right VM.
* devel-storage-fixes:
storage/file: use proper exception instead of assert
storage/file: import data into temporary volume
storage/lvm: check for LVM LV existence and type when creating ThinPool
storage/lvm: fix size reporting just after creating LV
Similar to LVM changes, this fixes/improves multiple things:
- no old data visible in the volume
- failed import do not leave broken volume
- parially imported data not visible to running VM
QubesOS/qubes-issues#3169
* storage-properties:
storage: use None for size/usage properties if unknown
tests: call search_pool_containing_dir with various dirs and pools
storage: make DirectoryThinPool helper less verbose, add sudo
api/admin: add 'included_in' to admin.pool.Info call
storage: add Pool.included_in() method for checking nested pools
storage: move and generalize RootThinPool helper class
storage/kernels: refuse changes to 'rw' and 'revisions_to_keep'
api/admin: implement admin.vm.volume.Set.rw method
api/admin: include 'revisions_to_keep' and 'is_outdated' in volume info
