- Two new methods: .features.check_with_adminvm() and
.check_with_template_and_adminvm(). Common code refactored.
- Two new AdminAPI calls to take advantage of the methods:
- admin.vm.feature.CheckWithAdminVM
- admin.vm.feature.CheckWithTemplateAndAdminVM
- Features manager moved to separate module in anticipation of features
on app object in R5.0. The attribute Features.vm renamed to
Features.subject.
- Documentation, tests.
The new property is meant for management stack (Salt) to set which DVM
template should be used to maintain given VM. Since the DispVM based on
it will be given ultimate control over target VM (qubes.VMShell
service), it should be trusted. The one pointed to by default_dispvm
not necessary is one.
The property defaults to the value from the template (if any), and then
to a global management_dispvm property. By default it is set to None.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Use maxmem=0 for disabling dynamic memory balance, instead of cryptic
service.meminfo-writer feature. Under the hood, meminfo-writer service
is also set based on maxmem property (directly in qubesdb, not
vm.features dict).
Having this as a property (not "feature"), allow to have sensible
handling of default value. Specifically, disable it automatically if
otherwise it would crash a VM. This is the case for:
- domain with PCI devices (PoD is not supported by Xen then)
- domain without balloon driver and/or meminfo-writer service
The check for the latter is heuristic (assume presence of 'qrexec' also
can indicate balloon driver support), but it is true for currently
supported systems.
This also allows more reliable control of libvirt config: do not set
memory != maxmem, unless qmemman is enabled.
memory != maxmem only makes sense if qmemman for given domain is
enabled. Besides wasting some domain resources for extra page tables
etc, for HVM domains this is harmful, because maxmem-memory difference
is made of Popupate-on-Demand pool, which - when depleted - will kill
the domain. This means domain without balloon driver will die as soon
as will try to use more than initial memory - but without balloon driver
it sees maxmem memory and doesn't know about the lower limit.
FixesQubesOS/qubes-issues#4135
When a VM (or its template) does not explicitly set a qrexec_timeout,
fall back to a global default_qrexec_timeout (with default value 60),
instead of hardcoding the fallback value to 60.
This makes it easy to set a higher timeout for the whole system, which
helps users who habitually launch applications from several (not yet
started) VMs at the same time. 60 seconds can be too short for that.
Multiple properties are related to system installed inside the VM, so it
makes sense to have them the same for all the VMs based on the same
template. Modify default value getter to first try get the value from a
template (if any) and only if it fails, fallback to original default
value.
This change is made to those properties:
- default_user (it was already this way)
- kernel
- kernelopts
- maxmem
- memory
- qrexec_timeout
- vcpus
- virt_mode
This is especially useful for manually installed templates (like
Windows).
Related to QubesOS/qubes-issues#3585
Use VM's actual IP address as a gateway for other VMs, instead of
hardcoded link-local address. This is important for sys-net generated
ICMP diagnostics packets - those must _not_ have link-local source
address, otherwise wouldn't be properly forwarded back to the right VM.
* qubesos/pr/187:
Don't fail create/clone if /var/lib/qubes/TYPE/NAME/ exists
Make 'qvm-volume revert' really use the latest revision
Fix wrong mocks of Volume.revisions
* qubesos/pr/185:
vm: remove doc for non-existing event `monitor-layout-change`
vm: include tag/feature name in event name
events: add support for wildcard event handlers
Human readable format `str(datetime.datetime)` is a nightmare for Admin
API level communication. Especially setting the property in a format
that it was read was not supported, and handling such format in
untrusted input handling code is a bad idea. Revert to a simple intiger
format.
Rename events:
- domain-feature-set -> domain-feature-set:feature
- domain-feature-delete -> domain-feature-delete:feature
- domain-tag-add -> domain-tag-add:tag
- domain-tag-delete -> domain-tag-delete:tag
Make it consistent with property-* events. It makes more sense to
include tag/feature name in event name, so handler can watch a single
tag/feature - which is the most common case. Otherwise, most handlers
would begin with `if feature == '...'` anyway, wasting time on most
events.
In cases where multiple features/tags should be handled by a single
handler, it is now possible to register a handler with wildcard, for
example `domain-feature-set:*`.
When dom0 do not provide the kernel, it should also not set kernel
command line in libvirt config. Otherwise qemu in stubdom fails to start
because it get -append option without -kernel, which is illegal
configuration.
FixesQubesOS/qubes-issues#3339
Add property for IPv6 address ('ip6'). Build default value similarly to
IPv4 - common prefix + QID or Disp ID (for DispVMs).
This all is disabled unless 'ipv6' feature is enabled. It is inherited
from netvm (not template).
Even when enabled, VM may decide to not use it - or simply not support
it.
QubesOS/qubes-issues#718
There were many cases were the check was missing:
- changing default_netvm
- resetting netvm to default value
- loading already broken qubes.xml
Since it was possible to create broken qubes.xml using legal calls, do
not reject loading such file, instead break the loop(s) by setting netvm
to None when loop is detected. This will be also useful if still not all
places are covered...
Place the check in default_netvm setter. Skip it during qubes.xml loading
(when events_enabled=False), but still keep it in setter, to _validate_ the
value before any property-* event got fired.
* fixes-20170929:
vm: do not start QubesDB watch instance multiple times
vm: report storage.stop() errors to log
vm: move comment
storage: fix method name in LinuxModules volume
Prevent removing domain that is referenced from anywhere
vm: add vm.klass property
Move QubesVM.{name,qid,uuid,label} to BaseVM
vm: do not allow deleting template property from AppVM and DispVM
vm/qubesvm: emit event on failed startup
vm/qubesvm: remove duplicated qmemman_client.close()
vm/dispvm: cleanup DispVM also on failed startup
vm/dispvm: fix error message
ext/block: properly list devtype=cdrom option
block: fix handling non-existing devices
block: improve handling device name and description
vm.create_qdb_entries can be called multiple times - for example when
changing VM IP. Move starting qdb watcher to start(). And just in case,
cleanup old watcher (if still exists) before starting new one.
This fixes one FD leak.
There is intentionally no default template in terms of qubes.property
definition, to not cause problems when switching global default_template
property - like breaking some VMs, or forcing the user to shutdown all
of them for this. But this also means it shouldn't be allowed to reset
template to "default" value, because it will result in a VM without
template at all.
FixesQubesOS/qubes-issues#3115
* qubesos/pr/150:
qubes/tests: moar fixes
test-packages: add missing libvirt classes
qubes/tests: do not deadlock on .drain()
qubes/vm: put name= first in __repr__
tests: fix some memory leaks
tests: complain about memory leaks
tests: use one event loop and one libvirtaio impl
'dispvm_allowed' name was confusing, because it suggested being able to
spawn new DispVMs, not being a template for DispVM.
FixesQubesOS/qubes-issues#3047
Clone properties from DispVM template after setting base properties
(qid, name, uuid). This means we can use standard clone_properties()
function. Otherwise various setters may fail - for example
netvm setter require uuid property initialized (for VM lookup in VM
collection).
Also, make dispvm_allowed check more robust - include direct creation of
DispVM, and also check just before VM startup (if property was changed
in the meantime).
FixesQubesOS/qubes-issues#3057
Add auto_cleanup property, which remove DispVM after its shutdown
- this is to unify DispVM handling - less places needing special
handling after DispVM shutdown.
New DispVM inherit all settings from respective AppVM. Move this from
classmethod `DispVM.from_appvm()`, to DispVM constructor. This unify
creating new DispVM with any other VM class.
Notable exception are attached devices - because only one running VM can
have a device attached, this would prevent second DispVM started from
the same AppVM. If one need DispVM with some device attached, one can
create DispVM with auto_cleanup=False. Such DispVM will still not have
persistent storage (as any other DispVM).
Tests included.
QubesOS/qubes-issues#2974
Since it is no longer child of QubesVM, constructor do not take 'qid'
and 'name' arguments.
Also:
- remove other dropped properties tests (netvm, storage related)
- make the test working in non-dom0
Don't set 'source' volume in various places (each VM class constructor
etc), do it as part of volume initialization. And when it needs to be
re-calculated, call storage.init_volume again.
This code was duplicated, and as usual in such a case, those copies
were different - one have set 'size', the other one not.
QubesOS/qubes-issues#2256
Since we have app.default_pool* properties, create appropriately named
pool and let those properties choose the right pool. This also means we
don't need to specify pool name in default volume config anymore
QubesOS/qubes-issues#2256
