Marek Marczykowski-Górecki a3d02db170 doc: update qvm-prefs doc 11 years ago
..
qubes-tools fa8d659189 Move dom0-update code to separate repository 11 years ago
qvm-tools a3d02db170 doc: update qvm-prefs doc 11 years ago
.gitignore d9358a91aa Move manpages here from separate repo 11 years ago
Makefile d9358a91aa Move manpages here from separate repo 11 years ago
README.pvusb db7f375635 Introduce 'doc' dir 11 years ago

README.pvusb

Dedicated usbvm (optional)
~~~~~~~~~~~~~~~~~~~~~~~~~~

In dom0, once:
qvm-create -l red usbvm

# FIXME: use your own PCI device IDs
qvm-pci -a usbvm 00:1d.0
qvm-pci -a usbvm 00:1d.1
qvm-pci -a usbvm 00:1d.2
qvm-pci -a usbvm 00:1d.7

After each dom0 reboot:
qvm-start usbvm

List
~~~~

In dom0:
qvm-usb -l

Example output:
dom0:7-4 0718:061a TDKMedia_Trans-It_Drive_070326AE8AF92D95 (attached to qdvp:0-1)
dom0:7-5 0b05:1706 ASUS_802.11g_WLAN_Drive (attached to netvm:0-1)
dom0:1-1 045e:0084 Microsoft_Basic_Optical_Mouse
usbvm:4-6 05e3:0723 Generic_USB_Storage (attached to qdvp:1-1)

Attach
~~~~~~

In dom0:
qvm-usb -a [--no-auto-detach] :-

Example:
qvm-usb -a netvm usbvm:4-1

Detach
~~~~~~

In dom0:
qvm-usb -d :-

Example:
qvm-usb -d netvm:0-1

Known issues
~~~~~~~~~~~~

List/attach/detach operations seem to work ok, devices are recognized by the target VM etc.
But actual usage of the attached devices is unstable at best. In fact the only working device
I saw was one USB stick (and this only after it took a minute to time out and reset the bus
couple times). Kernel crashes are normal as well. I have not investigated these issues yet,
I had similar experience with Marek's scripts.

* System keyboard / mouse are listed and can be detached away
* Virtual USB devices (ones created by PVUSB frontend) may be listed
* The installation/configuration is not persistent, not retained between reboots
* No debugging / logging / audit trail
* When an attached device is physically unplugged, USB port remains mapped but not displayed
in the list. If device is plugged back it continues to work. Unlisted device cannot be detached.
* We are not attaching actual devices, but USB ports (different behavior from VMWare, might be confusing)
* After device is detached from the frontend and returned back to the backend it is not alwayws usable there
* Code changing configuration of pvusb fe/be and vusb bind/unbind helper are located
misc/xl-qvm-usb-attach.py misc/xl-qvm-usb-detach.py misc/vusb-ctl.py. These helpers are
deployed into the backend domain. The initialization code is qubesutils.py in usb_setup(),
should probably also be moved into an external helper. Perhaps the functionality of these
external helpers should be merged into libxl? The is one catch is invokation of vusb helper
in the backend domain -- now it relies on qubes-specific API.
* After reboot attached USB devices are not listed by 'qvm-usb -l' until replugged.