GNOME automatically set scaling factor to 2 when HiDPI is detected.
Unfortunately it does it also on not really HiDPI displays, making the
whole UI unusably large. There is no middle ground - scaling factor must
be integer, so 1.5 is not supported. Lets opt on a conservative side and
fallback to scaling factor 1.
Solution by @alyssais, thanks!
FixesQubesOS/qubes-issues#3108
* qubesos/pr/72:
Fix UCA mistake and qvm-actions script
Fix ShellCheck comments
Add debian package support
Disable Thunar thumbnails
Add support for Thunar Qubes VM tools
If IPv6 is configured in the VM, and it is providing network to others,
apply IPv6 firewall similar to the IPv4 one (including NAT for outgoing
traffix), instead of blocking everything. Also, enable IP forwarding for
IPv6 in such a case.
FixesQubesOS/qubes-issues#718
* qubesos/pr/67:
archlinux fix .service added twice in networking install script
Makefile: install-netvm shouldn't be a dependency of itself.
archlinux: add recently splitted packages as optional dependencies of qubes-vm-core
archlinux: fix incorrect keyring being populated
Makefile: remove invalid reference to network dropins install target
archlinux: fix shellcheck issues
archlinux: create a keyring package to install binary repository automatically
Makefile: add network install targets to install-deb
Makefile: fix typo created when spliting the install targets
Makefile: add basic networking to the new install-corevm target
archlinux: split core-agent from netvm-agent
Makefile: ensure that everything is installed by default for rh based agents
Makefile: split network install target from core agent install target
* fixes-20171019:
debian: cleanup after splitting qubes-core-agent
Fix removing temporary file after editing in (Disp)VM
network: fix rules for network setup on new udev
debian: disable timer-based apt-get
Debian stretch in default configuration calls apt-get update every 24h.
And additionally, have automatic unattended security updates enabled.
Generally it would be good thing on standalone system, but in AppVM
which loose its rootfs changes after restart it is a waste of resources.
Especially when it kicks in on multiple VMs simultaneously, while on
battery (apt-daily.service have ConditionACPower=true, but VM don't have
that information...).
It would make some sense on TemplateVM/StandaloneVM, but then it kicks
in just at VM startup. Which conflicts with starting the update manually
then (by clicking "update VM" button in manager for example, or using
salt).
So, disable this feature completely.
The actual solution is based on pkg-manager-no-autoupdate by @adrelanos.
FixesQubesOS/qubes-issues#2621
If root filesystem is the last partition (new layout), resize it
in-place. Use 'parted' tool because it can resize just one partition,
without need to specify the whole new partition table. Since the
partition is mounted, parted is unhappy to modify it. Force it by
answering to its interactive prompts, and add (apparently not
documented) ---pretend-input-tty to use those answers even
though stdin is not a tty. Split the operation into multiple parted
calls, for more reliable interactive prompts handling.
Qubes 3.x disk layout (no partition table) is also supported, but the
one that was used in Qubes 4.0 rc1 (root filesystem as the first
partition) is not.
FixesQubesOS/qubes-issues#3173QubesOS/qubes-issues#3143
Default `ask` policy ignore target domain specified by the caller, so it
doesn't make sense to specify one. Provide convenient wrappers not
needing one. Do not change behaviour of existing tools for compatibility
reasons.
FixesQubesOS/qubes-issues#3141
clock synchronization mechanism rewritten to use systemd-timesync instead of NtpDate; at the moment, requires:
- modifying /etc/qubes-rpc/policy/qubes.GetDate to redirect GetDate to designated clockvm
- enabling clocksync service in clockvm ( qvm-features clockvm-name service/clocksync true )
Works as specified in issue listed below, except for:
- each VM synces with clockvm after boot and every 6h
- clockvm synces time with the Internet using systemd-timesync
- dom0 synces itself with clockvm every 1h (using cron)
fixesQubesOS/qubes-issues#1230
It isn't really needed. It was used to workaround libusb bug (causing
crash when the system does not have any USB controller), but since we
use HVM now which do have some USB controllers it isn't needed anymore.
Also, it is not available in stock Fedora kernels.
Qubes VM require few config options in grub. Ship appropriate
configuration. Debian have grub.d support, so it can be done cleanly.
On Fedora, /etc/default/grub needs to be modified. Still keep the
options in separate file, but include it manually from
/etc/default/grub.
QubesOS/qubes-issues#2577
It is expected to be killed by a signal. Exit with returncode 0 anyway.
While at it, adjust it for current service format (executable, with
proper shebang).
This is meant to notify dom0 about features supported by just-installed
template. This service is called by dom0 just after template
installation.
FixesQubesOS/qubes-issues#1637
Documentation pending: QubesOS/qubes-issues#2829
Configure package manager to use 127.0.0.1:8082 as proxy instead of
"magic" IP intercepted later. The listen on this port and whenever
new connection arrives, spawn qubes.UpdatesProxy service call (to
default target domain - subject to configuration in dom0) and connect
its stdin/out to the local TCP connection. This part use systemd.socket
unit in case of systemd, and ncat --exec otherwise.
On the other end - in target domain - simply pass stdin/out to updates
proxy (tinyproxy) running locally.
It's important to _not_ configure the same VM to both be updates proxy and
use it. In practice such configuration makes little sense - if VM can
access network (which is required to run updates proxy), package manager
can use it directly. Even if this network access is through some
VPN/Tor. If a single VM would be configured as both proxy provider and
proxy user, connection would loop back to itself. Because of this, proxy
connection redirection (to qrexec service) is disabled when the same VM
also run updates proxy.
FixesQubesOS/qubes-issues#1854
...but installed on all Debian versions. This is mostly required by
vebose file list in debian/qubes-core-agent.install. But also make it
use new options when upstream will set them.
QubesOS/qubes-issues#2161
This reverts commit 5dfcf06ef4.
python3-daemon isn't widespread enough yet - for Debian jessie available
only in packports.
In addition to the revert itself, adjust packaging for this change
(mostly for Debian).
Add --install-layout=deb option to setup.py, so files will not land in
/usr/local.
Also, explicitly list packaged files - make it easier to split the
package later.
This way:
- VM prompt do know VM list, the list may be filtered based on policy
- source VM don't learn name of target VM
FixesQubesOS/qubes-issues#910
glib-compile-schemas recommend naming override files with nn_ prefix,
where nn is a number. Lets use 20, to allow both higher and lower
priority files.
QubesOS/qubes-issues#1108
Since 'script' xenstore entry no longer allows passing arguments
(actually this always was a side effect, not intended behaviour), we
need to pass additional parameters some other way. Natural choice for
Qubes-specific script is to use QubesDB.
And since those parameters are passed some other way, it is no longer
necessary to keep it as separate script.
FixesQubesOS/qubes-issues#1143
Do not use a symlink there, as it will be left after NetworkManager
shutdown - as a broken link then
FixesQubesOS/qubes-issues#2320
Reported by Achim Patzner <noses@noses.com>
This rewrite is mainly to adopt new interface for Qubes 4.x.
Main changes:
- change language from bash to python, introduce qubesagent python package
- support both nftables (preferred) and iptables
- new interface (https://qubes-os.org/doc/vm-interface/)
- IPv6 support
- unit tests included
- nftables version support running along with other firewall loaded
FixesQubesOS/qubes-issues#1815QubesOS/qubes-issues#718
This have many advantages:
- prevent XSS (QubesOS/qubes-issues#1462)
- use default browser instead of default HTML viewer
- better qrexec policy control
- easier to control where are opened files vs URLs
For now allow only http(s):// and ftp:// addresses (especially prevent
file://). But this list can be easily extended.
QubesOS/qubes-issues#1462FixesQubesOS/qubes-issues#1487
No functional change.
This will make it easier to switch the tool (without recompiling
vm-file-editor), or even use differrent tools depending on some
conditions.
QubesOS/qubes-issues#1621
Many USB controllers doesn't play nice with suspend when attached to PV
domain, so unload those drivers by default. This is just a configuration
file, so user is free to change this setting if his/shes particular
controller doesn't have such problem.
FixesQubesOS/qubes-issues#1565
DNF in Fedora 22 uses python2, but in Fedora 23 - python3. Package both
of them, in separate packages (according to Fedora packaging guidelines)
and depend on the right one depending on target distribution version.
FixesQubesOS/qubes-issues#1529
Explicitly block something like "curl http://10.137.255.254:8082" and
return error page in this case. This error page is used in Whonix to
detect if the proxy is torrified. If not blocked, it may happen that
empty response is returned instead of error. See linked ticket for
details.
FixesQubesOS/qubes-issues#1482
Apparently unmanaged devices are loaded only from main
NetworkManager.conf. Exactly the same line pasted (not typed!) to main
NetworkManager.conf works, but in
/etc/NetworkManager/conf.d/30-qubes.conf it doesn't.
BTW There was a typo in option name ("unmanaged_devices" instead of
"unmanaged-devices", but it wasn't the cause).
This reverts commit 6c4831339c.
QubesOS/qubes-issues#1176
Because those services do not yet support being restarted.
Extended variable `$nrconf{override_rc}`, i.e. packages only reported to need
restart, but blacklisted from default/suggested automatic restarted with
`qubes-core-agent` and `qubes-gui-agent`.
See also `$nrconf{override_rc}`:
10bd2db5e2/ex/needrestart.conf (L65)
Thanks to @liske for helping with this.
https://github.com/liske/needrestart/issues/13#issuecomment-136804625
Each time some arbitrary package was installed using dpkg or apt-get, the update notification in Qubes VM Manager was cleared.
No matter if there were still updates pending. (Could happen even after the user running `apt-get dist-upgrade` in case of package manager issues.)
No longer clear upgrade notification in QVMM on arbitrary package installation.
Check if upgrades have been actually installed before clearing the notifications.
https://github.com/QubesOS/qubes-issues/issues/1066#issuecomment-150044906
Since /lib/modules is not mounted read-only anymore (only a selected
subdirectory there), it is no longer required to prevent kernel package
installation. Even more - since PV Grub being supported, it makes sense
to have kernel installed in the VM.
QubesOS/qubes-issues#1354
