According to the specification[1], the setting name is 'addresses', not
'address'. The later apparently worked on some NetworkManager versions,
but for example not on the one in Debian wheezy. Also fix value
format (IP;netmask;gateway).
[1] htts://developer.gnome.org/NetworkManager/unstable/ref-settings.html
FixesQubesOS/qubes-issues#1280
Do not modify main /etc/NetworkManager/NetworkManager.conf as it would
cause conflicts during updates. Use
/etc/NetworkManager/conf.d/30-qubes.conf instead.
Also remove some dead code for dynamically generated parts (no longer
required to "blacklist" eth0 in VMs - we have proper connection
generated for it). It was commented out for some time already
FixesQubesOS/qubes-issues#1176
There were multiple problems with reusing existing one:
- need to sync with upstream changes (configuration path etc)
- conflicts resolution on updates
- lack of iptables --wait, which causes firewall fail to load sometimes
QubesOS/qubes-issues#1067
Apparently even iptables-restore does not handle concurrent firewall
updates. This is especially a problem in case of HVM, which have two
network interfaces (one through stubom and the other direct) added at
the same time.
The later one is present only in latest iptables version - especially
debian does not have it. But we need to handle "Device or resources
busy" problem somehow.
There is a possiblilty of the apt-get post hook getting triggered
more than once for each apt-get session, therefore we only notify
dom0 that there are no updates available and do not perform an
apt-get update.
The qubes-update-check.service will still perform an update so even
if the dist-upgrade failed and there was actually more files to update
the qubes-update-check.serivce would then at some point notify dom0
about those updates being available
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=nJSZ
-----END PGP SIGNATURE-----
Merge tag 'jm_21d89335'
Tag for commit 21d89335fe
# gpg: Signature made Sat Apr 25 09:44:38 2015 CEST using RSA key ID 5A4C6DAD
# gpg: Good signature from "Jason Mehring (Qubes OS Signing Key) <nrgaway@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: E0E3 2283 FDCA C1A5 1007 8F27 1BB9 B1FB 5A4C 6DAD
* tag 'jm_21d89335':
debian: Update notification now notifies dom0 when an upgrade is completed
A file is created in /var/lib/qubes/protected-files. Scripts can grep this file before modifying
known files to be protected and skip any modifications if the file path is within protected-files.
Usage Example:
if ! grep -q "^/etc/hostname$" "${PROTECTED_FILE_LIST}" 2>/dev/null; then
Also cleaned up maintainer scripts removing unneeded systemd status functions and streamlined
the enable/disable systemd unit files functions
vif-route-qubes can be called simultaneously, for example in case of:
- multiple domains startup
- HVM startup (two interfaces: one to the target domain, second one to
stubdom)
If that happens, one of calls can fail because of iptables lock.
Since the rules are no more directly handed to echo -e, sed needs to
handle all escape sequences used in rules (newline only, but in
different notations).
This patch introduces two new qvm-services:
- disable-default-route
- disable-dns-server
Both disabled by default. You can enable any of them to not set default
route and/or DNS servers in the VM. Those settings have no effect on
NetVM, where such settings are controlled by NetworkManager.
This is based on patch sent by Joonas Lehtonen
<joonas.lehtonen@openmailbox.org>
https://groups.google.com/d/msgid/qubes-devel/54C7FB59.2020603%40openmailbox.org
Conflicts:
network/setup-ip
vm-init.d/qubes-core
vm-systemd/qubes-sysinit.sh
This patch introduces two new qvm-services:
- set-default-route
- set-dns-server
Both enabled by default. You can disable any of them to not set default
route and/or DNS servers in the VM. Those settings have no effect on
NetVM, where such settings are controlled by NetworkManager.
This is based on patch sent by Joonas Lehtonen
<joonas.lehtonen@openmailbox.org>
https://groups.google.com/d/msgid/qubes-devel/54C39656.3090303%40openmailbox.org
Conflicts:
network/setup-ip
vm-init.d/qubes-core
vm-systemd/qubes-sysinit.sh
Backend domain generates its IP address based on frontend IP, not
settings given from dom0. So change frontend method to the same (for
DispVM it makes a difference). Now "qubes-gateway" xenstore entry is
basically primary DNS address only.
