- qubes-misc-post.service is no longer responsible for mounting /rw
- both qubes-sysinit.service and qubes-mount-dirs.service are part of
basic.target, so no need to mention them explicitly (as long as
DefaultDependencies=yes)
QubesOS/qubes-issues#2198
It is needed for vchan communication. It was loaded implicitly by mount
/proc/xen, but since we're moving away from this legacy interface, load
it explicitly.
QubesOS/qubes-issues#2194
The service is really responsible for mounting /rw and /home, so should
be ordered before local-fs.target - this will allow other services
to use standard ordering targets.
This probably makes Before=qubes-gui-agent.service not needed anymore,
but do not remove it yet without extensive testing to not risk
regression.
FixesQubesOS/qubes-issues#2194
Even if update check fails for some reason (network problem, apt-get lock
being held etc), don't mark the service as failed. The update check
mechanism is designed this way to not worry about such single failures
- other VM(s) may still check and report updates availability.
FixesQubesOS/qubes-issues#1889
* qubesos/pr/18:
Enable xendriverdomain.service in 75-qubes-vm.preset
Remove 'if true' wrapper from 06a0d30d50
*Do* block until good random is available again
dvm, then xendriverdomain, then qrexec-agent
Network management software should order itself after network-pre.target
(man 7 systemd.special) so that other units can order themselves before
the *beginning* of network initialization. (qubes-misc-post too because
it calls setup-ip.)
Relevant for QubesOS/qubes-issues#2108
Files in /var/run/qubes-service are created by qubes-sysinit.service. So
defer that condition check after that service start.
Thanks @adrelanos for the report.
FixesQubesOS/qubes-issues#1985
* origin/pr/58:
refactoring / code simplification
fixed broken file copy for files in multi level directories
also exit from bind-directories if file /var/run/qubes-service/qubes-dvm exists
use symlink_level_max rather than hardcoding 10; comment
run /usr/lib/qubes/bind-dirs.sh from mount-dirs.sh
renamed: bind-dirs -> bind-dirs.sh
renamed: misc/bind-dirs -> vm-systemd/bind-dirs
work on bind-dirs
work on bind-dirs
work on bind-dirs https://phabricator.whonix.org/T414
For a long time the DNS address was the same as default gateway. This is
still the case in R3.x, but using `qubes-gateway` configuration
parameter for it is misleading. It should be up to dom0 to provide DNS
address (whether the value is the same as gateway or not).
FixesQubesOS/qubes-issues#1817
qubes-sysinit.sh waits for xenbus initialization by watching its
interface file presence. In linux before 3.10 there is no
/dev/xen/xenbus, which is the case in Debian 7 (3.2 kernel). The problem
applies only to the VMs with PVGrub enabled, because otherwise VM would
use dom0 privided kernel, which is much newer.
FixesQubesOS/qubes-issues#1609
* Check whether sysctl is accessible
* Check whether a key which exists when CONFIG_MODULES=y is not accessible
If true, CONFIG_MODULES=n, so ignore modprobe failure.
If false, fail.
- /var/run/qubes/this-is-appvm
- /var/run/qubes/this-is-netvm
- /var/run/qubes/this-is-proxyvm
- /var/run/qubes/this-is-templatevm
This is useful for checking ConditionPathExists from within systemd units.
(Came up in https://phabricator.whonix.org/T432#7206.)
Among other things this also fixes build failure - those scripts were
installed but not listed in spec file.
Actual check doesn't perform 'apt-get update', so do that when running
"standalone" (not as a hook from 'apt-get').
QubesOS/qubes-issues#1066
Initial size of those tmpfs-mounted directories is calculated as 50% of
RAM at VM startup time. Which happen to be quite small number, like
150M. Having such small /tmp and/or /dev/shm apparently isn't enough for
some applications like Google chrome. So set the size statically at 1GB,
which would be the case for baremetal system with 2GB of RAM.
FixesQubesOS/qubes-issues#1003
There were multiple problems with reusing existing one:
- need to sync with upstream changes (configuration path etc)
- conflicts resolution on updates
- lack of iptables --wait, which causes firewall fail to load sometimes
QubesOS/qubes-issues#1067
qubes-desktop-file-install is called by qubes-triggers-desktop-file-install. It's
arguments are based on the Gnome desktop-install-file utility to allow it to be replaced
by same. Currently the Gnome utility can not be used since it automatically validates
the .desktop entry files with no option to skip validation and will fail on some third
party .desktop files that are not formed properly.
A single trigger script is shared between Fedora, Debian. This script is used by the
package managers triggers and will copy original .desktop files from `/etc/xdg/autostart`
to `/usr/share/qubes/xdg/autostart` and modify the OnlyShownIn / NotShownIn, etc. The
original .desktop files are left untouched and left in place.
Qubes modifies the XDG_CONFIG_DIRS to first include the `/usr/share/qubes/xdg`
directory (XDG_CONFIG_DIRS=/usr/share/qubes/xdg:/etc/xdg).
If a package gets removed, it's desktop entry is also removed from the /usr/share/qubes/xdg
directory.
'qubes-desktop-file-install' options:
--dir DIR Install desktop files to the DIR directory (default: <FILE>)
--force Force overwrite of existing desktop files (default: False)
--remove-show-in Remove the "OnlyShowIn" and "NotShowIn" entries from the desktop file (default: False)
--remove-key KEY Remove the KEY key from the desktop files, if present
--set-key (KEY VALUE) Set the KEY key to VALUE
--remove-only-show-in ENVIRONMENT Remove ENVIRONMENT from the list of desktop environment where the desktop files should be displayed
--add-only-show-in ENVIRONMENT Add ENVIRONMENT to the list of desktop environment where the desktop files should be displayed
--remove-not-show-in ENVIRONMENT Remove ENVIRONMENT from the list of desktop environment where the desktop files should not be displayed
--add-not-show-in ENVIRONMENT Add ENVIRONMENT to the list of desktop environment where the desktop files should not be displayed
A file is created in /var/lib/qubes/protected-files. Scripts can grep this file before modifying
known files to be protected and skip any modifications if the file path is within protected-files.
Usage Example:
if ! grep -q "^/etc/hostname$" "${PROTECTED_FILE_LIST}" 2>/dev/null; then
Also cleaned up maintainer scripts removing unneeded systemd status functions and streamlined
the enable/disable systemd unit files functions
Offline resize requires to run fsck -f first. Because we support only
growing that image, we can simply use online resize instead.
This finally fixesqubesos/qubes-issues#772
This patch introduces two new qvm-services:
- disable-default-route
- disable-dns-server
Both disabled by default. You can enable any of them to not set default
route and/or DNS servers in the VM. Those settings have no effect on
NetVM, where such settings are controlled by NetworkManager.
This is based on patch sent by Joonas Lehtonen
<joonas.lehtonen@openmailbox.org>
https://groups.google.com/d/msgid/qubes-devel/54C7FB59.2020603%40openmailbox.org
Conflicts:
network/setup-ip
vm-init.d/qubes-core
vm-systemd/qubes-sysinit.sh
This patch introduces two new qvm-services:
- set-default-route
- set-dns-server
Both enabled by default. You can disable any of them to not set default
route and/or DNS servers in the VM. Those settings have no effect on
NetVM, where such settings are controlled by NetworkManager.
This is based on patch sent by Joonas Lehtonen
<joonas.lehtonen@openmailbox.org>
https://groups.google.com/d/msgid/qubes-devel/54C39656.3090303%40openmailbox.org
Conflicts:
network/setup-ip
vm-init.d/qubes-core
vm-systemd/qubes-sysinit.sh
