123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620 |
- #
- # The Qubes OS Project, http://www.qubes-os.org
- #
- # Copyright (C) 2010 Joanna Rutkowska <joanna@invisiblethingslab.com>
- # Copyright (C) 2010 Rafal Wojtczuk <rafal@invisiblethingslab.com>
- #
- # This program is free software; you can redistribute it and/or
- # modify it under the terms of the GNU General Public License
- # as published by the Free Software Foundation; either version 2
- # of the License, or (at your option) any later version.
- #
- # This program is distributed in the hope that it will be useful,
- # but WITHOUT ANY WARRANTY; without even the implied warranty of
- # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- # GNU General Public License for more details.
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
- #
- #
- %{!?version: %define version %(cat version)}
- Name: qubes-core-vm
- Version: %{version}
- Release: 1%{dist}
- Summary: The Qubes core files for VM
- Group: Qubes
- Vendor: Invisible Things Lab
- License: GPL
- URL: http://www.qubes-os.org
- Requires: /usr/bin/xenstore-read
- Requires: fedora-release
- Requires: yum-plugin-post-transaction-actions
- Requires: NetworkManager >= 0.8.1-1
- %if %{fedora} >= 18
- # Fedora >= 18 defaults to firewalld, which isn't supported nor needed by Qubes
- Requires: iptables-services
- Conflicts: firewalld
- %endif
- Requires: /usr/bin/mimeopen
- Requires: ethtool
- Requires: tinyproxy
- Requires: ntpdate
- Requires: net-tools
- Requires: nautilus-actions
- Requires: qubes-core-vm-kernel-placeholder
- Requires: qubes-qrexec-vm
- Provides: qubes-core-vm
- Obsoletes: qubes-core-commonvm
- Obsoletes: qubes-core-appvm
- Obsoletes: qubes-core-netvm
- Obsoletes: qubes-core-proxyvm
- Obsoletes: qubes-upgrade-vm < 2.0
- BuildRequires: xen-devel
- %define _builddir %(pwd)
- %define kde_service_dir /usr/share/kde4/services/ServiceMenus
- %description
- The Qubes core files for installation inside a Qubes VM.
- %prep
- # we operate on the current directory, so no need to unpack anything
- # symlink is to generate useful debuginfo packages
- rm -f %{name}-%{version}
- ln -sf . %{name}-%{version}
- %setup -T -D
- %build
- for dir in qubes-rpc misc; do
- (cd $dir; make)
- done
- %pre
- if [ "$1" != 1 ] ; then
- # do this whole %pre thing only when updating for the first time...
- exit 0
- fi
- mkdir -p /var/lib/qubes
- if [ -e /etc/fstab ] ; then
- mv /etc/fstab /var/lib/qubes/fstab.orig
- fi
- adduser --create-home user
- %install
- install -m 0644 -D misc/fstab $RPM_BUILD_ROOT/etc/fstab
- install -d $RPM_BUILD_ROOT/etc/init.d
- install vm-init.d/* $RPM_BUILD_ROOT/etc/init.d/
- install -d $RPM_BUILD_ROOT/lib/systemd/system $RPM_BUILD_ROOT/usr/lib/qubes/init
- install -m 0755 vm-systemd/*.sh $RPM_BUILD_ROOT/usr/lib/qubes/init/
- install -m 0644 vm-systemd/qubes-*.service $RPM_BUILD_ROOT/lib/systemd/system/
- install -m 0644 vm-systemd/qubes-*.timer $RPM_BUILD_ROOT/lib/systemd/system/
- install -m 0644 vm-systemd/NetworkManager.service $RPM_BUILD_ROOT/usr/lib/qubes/init/
- install -m 0644 vm-systemd/NetworkManager-wait-online.service $RPM_BUILD_ROOT/usr/lib/qubes/init/
- install -m 0644 vm-systemd/cups.service $RPM_BUILD_ROOT/usr/lib/qubes/init/
- install -m 0644 vm-systemd/ntpd.service $RPM_BUILD_ROOT/usr/lib/qubes/init/
- install -D -m 0440 misc/qubes.sudoers $RPM_BUILD_ROOT/etc/sudoers.d/qubes
- install -D -m 0644 misc/qubes.repo $RPM_BUILD_ROOT/etc/yum.repos.d/qubes.repo
- install -D -m 0644 misc/serial.conf $RPM_BUILD_ROOT/usr/lib/qubes/serial.conf
- install -D misc/qubes-serial-login $RPM_BUILD_ROOT/sbin/qubes-serial-login
- install -d $RPM_BUILD_ROOT/usr/share/glib-2.0/schemas/
- install -m 0644 misc/org.gnome.settings-daemon.plugins.updates.gschema.override $RPM_BUILD_ROOT/usr/share/glib-2.0/schemas/
- install -d $RPM_BUILD_ROOT/usr/lib/yum-plugins/
- install -m 0644 misc/yum-qubes-hooks.py* $RPM_BUILD_ROOT/usr/lib/yum-plugins/
- install -D -m 0644 misc/yum-qubes-hooks.conf $RPM_BUILD_ROOT/etc/yum/pluginconf.d/yum-qubes-hooks.conf
- install -d $RPM_BUILD_ROOT/var/lib/qubes
- install -d -m 755 $RPM_BUILD_ROOT/etc/pki/rpm-gpg
- install -m 644 misc/RPM-GPG-KEY-qubes* $RPM_BUILD_ROOT/etc/pki/rpm-gpg/
- install -D misc/xenstore-watch $RPM_BUILD_ROOT/usr/bin/xenstore-watch-qubes
- install -d $RPM_BUILD_ROOT/etc/udev/rules.d
- install -m 0644 misc/udev-qubes-misc.rules $RPM_BUILD_ROOT/etc/udev/rules.d/50-qubes-misc.rules
- install -m 0644 misc/udev-qubes-block.rules $RPM_BUILD_ROOT/etc/udev/rules.d/99-qubes-block.rules
- install -m 0644 misc/udev-qubes-usb.rules $RPM_BUILD_ROOT/etc/udev/rules.d/99-qubes-usb.rules
- install -d $RPM_BUILD_ROOT/usr/lib/qubes/
- install misc/qubes-download-dom0-updates.sh $RPM_BUILD_ROOT/usr/lib/qubes/
- install misc/udev-block-* $RPM_BUILD_ROOT/usr/lib/qubes/
- install misc/udev-usb-* $RPM_BUILD_ROOT/usr/lib/qubes/
- install misc/vusb-ctl.py $RPM_BUILD_ROOT/usr/lib/qubes/
- install misc/qubes-trigger-sync-appmenus.sh $RPM_BUILD_ROOT/usr/lib/qubes/
- install -D -m 0644 misc/qubes-trigger-sync-appmenus.action $RPM_BUILD_ROOT/etc/yum/post-actions/qubes-trigger-sync-appmenus.action
- install -D misc/polkit-1-qubes-allow-all.pkla $RPM_BUILD_ROOT/etc/polkit-1/localauthority/50-local.d/qubes-allow-all.pkla
- install -D misc/polkit-1-qubes-allow-all.rules $RPM_BUILD_ROOT/etc/polkit-1/rules.d/00-qubes-allow-all.rules
- mkdir -p $RPM_BUILD_ROOT/usr/lib/qubes
- if [ -r misc/dispvm-dotfiles.%{dist}.tbz ]; then
- install misc/dispvm-dotfiles.%{dist}.tbz $RPM_BUILD_ROOT/etc/dispvm-dotfiles.tbz
- else
- install misc/dispvm-dotfiles.tbz $RPM_BUILD_ROOT/etc/dispvm-dotfiles.tbz
- fi
- install misc/dispvm-prerun.sh $RPM_BUILD_ROOT/usr/lib/qubes/dispvm-prerun.sh
- install -D misc/qubes-core.modules $RPM_BUILD_ROOT/etc/sysconfig/modules/qubes-core.modules
- install -D misc/qubes-misc.modules $RPM_BUILD_ROOT/etc/sysconfig/modules/qubes-misc.modules
- install -m 0644 network/udev-qubes-network.rules $RPM_BUILD_ROOT/etc/udev/rules.d/99-qubes-network.rules
- install network/qubes-setup-dnat-to-ns $RPM_BUILD_ROOT/usr/lib/qubes
- install network/qubes-fix-nm-conf.sh $RPM_BUILD_ROOT/usr/lib/qubes
- install network/setup-ip $RPM_BUILD_ROOT/usr/lib/qubes/
- install network/network-manager-prepare-conf-dir $RPM_BUILD_ROOT/usr/lib/qubes/
- install -d $RPM_BUILD_ROOT/etc/dhclient.d
- ln -s /usr/lib/qubes/qubes-setup-dnat-to-ns $RPM_BUILD_ROOT/etc/dhclient.d/qubes-setup-dnat-to-ns.sh
- install -d $RPM_BUILD_ROOT/etc/NetworkManager/dispatcher.d/
- install network/{qubes-nmhook,30-qubes-external-ip} $RPM_BUILD_ROOT/etc/NetworkManager/dispatcher.d/
- install -D network/vif-route-qubes $RPM_BUILD_ROOT/etc/xen/scripts/vif-route-qubes
- install -m 0400 -D network/iptables $RPM_BUILD_ROOT/etc/sysconfig/iptables
- install -m 0400 -D network/ip6tables $RPM_BUILD_ROOT/etc/sysconfig/ip6tables
- install -m 0644 -D network/tinyproxy-qubes-yum.conf $RPM_BUILD_ROOT/etc/tinyproxy/tinyproxy-qubes-yum.conf
- install -m 0644 -D network/filter-qubes-yum $RPM_BUILD_ROOT/etc/tinyproxy/filter-qubes-yum
- install -d $RPM_BUILD_ROOT/etc/yum.conf.d
- touch $RPM_BUILD_ROOT/etc/yum.conf.d/qubes-proxy.conf
- install -d $RPM_BUILD_ROOT/usr/sbin
- install network/qubes-firewall $RPM_BUILD_ROOT/usr/sbin/
- install network/qubes-netwatcher $RPM_BUILD_ROOT/usr/sbin/
- install -d $RPM_BUILD_ROOT/usr/bin
- install qubes-rpc/{qvm-open-in-dvm,qvm-open-in-vm,qvm-copy-to-vm,qvm-run,qvm-mru-entry} $RPM_BUILD_ROOT/usr/bin
- install qubes-rpc/wrap-in-html-if-url.sh $RPM_BUILD_ROOT/usr/lib/qubes
- install qubes-rpc/qvm-copy-to-vm.kde $RPM_BUILD_ROOT/usr/lib/qubes
- install qubes-rpc/qvm-copy-to-vm.gnome $RPM_BUILD_ROOT/usr/lib/qubes
- install qubes-rpc/{vm-file-editor,qfile-agent,qopen-in-vm,qfile-unpacker} $RPM_BUILD_ROOT/usr/lib/qubes
- install qubes-rpc/qrun-in-vm $RPM_BUILD_ROOT/usr/lib/qubes
- install qubes-rpc/sync-ntp-clock $RPM_BUILD_ROOT/usr/lib/qubes
- install qubes-rpc/prepare-suspend $RPM_BUILD_ROOT/usr/lib/qubes
- install -d $RPM_BUILD_ROOT/%{kde_service_dir}
- install -m 0644 qubes-rpc/{qvm-copy.desktop,qvm-dvm.desktop} $RPM_BUILD_ROOT/%{kde_service_dir}
- install -d $RPM_BUILD_ROOT/etc/qubes-rpc
- install -m 0644 qubes-rpc/{qubes.Filecopy,qubes.OpenInVM,qubes.VMShell,qubes.SyncNtpClock} $RPM_BUILD_ROOT/etc/qubes-rpc
- install -m 0644 qubes-rpc/{qubes.SuspendPre,qubes.SuspendPost,qubes.GetAppmenus} $RPM_BUILD_ROOT/etc/qubes-rpc
- install -m 0644 qubes-rpc/qubes.WaitForSession $RPM_BUILD_ROOT/etc/qubes-rpc
- install -d $RPM_BUILD_ROOT/usr/share/file-manager/actions
- install -m 0644 qubes-rpc/*-gnome.desktop $RPM_BUILD_ROOT/usr/share/file-manager/actions
- install -D misc/nautilus-actions.conf $RPM_BUILD_ROOT/etc/xdg/nautilus-actions/nautilus-actions.conf
- install misc/meminfo-writer $RPM_BUILD_ROOT/usr/lib/qubes
- install -d $RPM_BUILD_ROOT/mnt/removable
- install -d $RPM_BUILD_ROOT/var/lib/qubes/dom0-updates
- install -D -m 0644 misc/xorg-preload-apps.conf $RPM_BUILD_ROOT/etc/X11/xorg-preload-apps.conf
- install -d $RPM_BUILD_ROOT/var/run/qubes
- install -d $RPM_BUILD_ROOT/home_volatile/user
- %triggerin -- initscripts
- cp /usr/lib/qubes/serial.conf /etc/init/serial.conf
- %post
- # disable some Upstart services
- for F in plymouth-shutdown prefdm splash-manager start-ttys tty ; do
- if [ -e /etc/init/$F.conf ]; then
- mv -f /etc/init/$F.conf /etc/init/$F.conf.disabled
- fi
- done
- remove_ShowIn () {
- if [ -e /etc/xdg/autostart/$1.desktop ]; then
- sed -i '/^\(Not\|Only\)ShowIn/d' /etc/xdg/autostart/$1.desktop
- fi
- }
- # don't want it at all
- for F in abrt-applet deja-dup-monitor imsettings-start krb5-auth-dialog pulseaudio restorecond sealertauto gnome-power-manager gnome-sound-applet gnome-screensaver orca-autostart; do
- if [ -e /etc/xdg/autostart/$F.desktop ]; then
- remove_ShowIn $F
- echo 'NotShowIn=QUBES;' >> /etc/xdg/autostart/$F.desktop
- fi
- done
- # don't want it in DisposableVM
- for F in gcm-apply ; do
- if [ -e /etc/xdg/autostart/$F.desktop ]; then
- remove_ShowIn $F
- echo 'NotShowIn=DisposableVM;' >> /etc/xdg/autostart/$F.desktop
- fi
- done
- # want it in AppVM only
- for F in gnome-keyring-gpg gnome-keyring-pkcs11 gnome-keyring-secrets gnome-keyring-ssh gnome-settings-daemon user-dirs-update-gtk gsettings-data-convert ; do
- if [ -e /etc/xdg/autostart/$F.desktop ]; then
- remove_ShowIn $F
- echo 'OnlyShowIn=GNOME;AppVM;' >> /etc/xdg/autostart/$F.desktop
- fi
- done
- # remove existing rule to add own later
- for F in gpk-update-icon nm-applet ; do
- remove_ShowIn $F
- done
- echo 'OnlyShowIn=GNOME;UpdateableVM;' >> /etc/xdg/autostart/gpk-update-icon.desktop || :
- echo 'OnlyShowIn=GNOME;NetVM;' >> /etc/xdg/autostart/nm-applet.desktop || :
- usermod -p '' root
- usermod -L user
- # Create NetworkManager configuration if we do not have it
- if ! [ -e /etc/NetworkManager/NetworkManager.conf ]; then
- echo '[main]' > /etc/NetworkManager/NetworkManager.conf
- echo 'plugins = keyfile' >> /etc/NetworkManager/NetworkManager.conf
- echo '[keyfile]' >> /etc/NetworkManager/NetworkManager.conf
- fi
- /usr/lib/qubes/qubes-fix-nm-conf.sh
- # Remove ip_forward setting from sysctl, so NM will not reset it
- sed 's/^net.ipv4.ip_forward.*/#\0/' -i /etc/sysctl.conf
- # Install firmware link only on system which haven't it yet
- if ! [ -e /lib/firmware/updates ]; then
- ln -s /lib/modules/firmware /lib/firmware/updates
- fi
- if ! grep -q '/etc/yum\.conf\.d/qubes-proxy\.conf' /etc/yum.conf; then
- echo >> /etc/yum.conf
- echo '# Yum does not support inclusion of config dir...' >> /etc/yum.conf
- echo 'include=file:///etc/yum.conf.d/qubes-proxy.conf' >> /etc/yum.conf
- fi
- # Revert 'Prevent unnecessary updates in VMs':
- sed -i -e '/^exclude = kernel/d' /etc/yum.conf
- # qubes-core-vm has been broken for some time - it overrides /etc/hosts; restore original content
- if ! grep -q localhost /etc/hosts; then
- cat <<EOF > /etc/hosts
- 127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 `hostname`
- ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
- EOF
- fi
- if [ "$1" != 1 ] ; then
- # do the rest of %post thing only when updating for the first time...
- exit 0
- fi
- if [ -e /etc/init/serial.conf ] && ! [ -f /var/lib/qubes/serial.orig ] ; then
- cp /etc/init/serial.conf /var/lib/qubes/serial.orig
- fi
- #echo "--> Disabling SELinux..."
- sed -e s/^SELINUX=.*$/SELINUX=disabled/ </etc/selinux/config >/etc/selinux/config.processed
- mv /etc/selinux/config.processed /etc/selinux/config
- setenforce 0 2>/dev/null
- # Remove most of the udev scripts to speed up the VM boot time
- # Just leave the xen* scripts, that are needed if this VM was
- # ever used as a net backend (e.g. as a VPN domain in the future)
- #echo "--> Removing unnecessary udev scripts..."
- mkdir -p /var/lib/qubes/removed-udev-scripts
- for f in /etc/udev/rules.d/*
- do
- if [ $(basename $f) == "xen-backend.rules" ] ; then
- continue
- fi
- if [ $(basename $f) == "50-qubes-misc.rules" ] ; then
- continue
- fi
- if [ $(basename $f) == "99-qubes-network.rules" ] ; then
- continue
- fi
- if [ $(basename $f) == "99-qubes-block.rules" ] ; then
- continue
- fi
- if [ $(basename $f) == "99-qubes-usb.rules" ] ; then
- continue
- fi
- mv $f /var/lib/qubes/removed-udev-scripts/
- done
- mkdir -p /rw
- #rm -f /etc/mtab
- #echo "--> Removing HWADDR setting from /etc/sysconfig/network-scripts/ifcfg-eth0"
- #mv /etc/sysconfig/network-scripts/ifcfg-eth0 /etc/sysconfig/network-scripts/ifcfg-eth0.orig
- #grep -v HWADDR /etc/sysconfig/network-scripts/ifcfg-eth0.orig > /etc/sysconfig/network-scripts/ifcfg-eth0
- %preun
- if [ "$1" = 0 ] ; then
- # no more packages left
- if [ -e /var/lib/qubes/fstab.orig ] ; then
- mv /var/lib/qubes/fstab.orig /etc/fstab
- fi
- mv /var/lib/qubes/removed-udev-scripts/* /etc/udev/rules.d/
- if [ -e /var/lib/qubes/serial.orig ] ; then
- mv /var/lib/qubes/serial.orig /etc/init/serial.conf
- fi
- fi
- %postun
- if [ $1 -eq 0 ] ; then
- /usr/bin/glib-compile-schemas %{_datadir}/glib-2.0/schemas &> /dev/null || :
- if [ -l /lib/firmware/updates ]; then
- rm /lib/firmware/updates
- fi
- fi
- %posttrans
- /usr/bin/glib-compile-schemas %{_datadir}/glib-2.0/schemas &> /dev/null || :
- %clean
- rm -rf $RPM_BUILD_ROOT
- rm -f %{name}-%{version}
- %files
- %defattr(-,root,root,-)
- %dir /var/lib/qubes
- %dir /var/run/qubes
- %dir %attr(0775,user,user) /var/lib/qubes/dom0-updates
- %{kde_service_dir}/qvm-copy.desktop
- %{kde_service_dir}/qvm-dvm.desktop
- /etc/NetworkManager/dispatcher.d/30-qubes-external-ip
- /etc/NetworkManager/dispatcher.d/qubes-nmhook
- /etc/X11/xorg-preload-apps.conf
- /etc/dispvm-dotfiles.tbz
- /etc/dhclient.d/qubes-setup-dnat-to-ns.sh
- /etc/fstab
- /etc/pki/rpm-gpg/RPM-GPG-KEY-qubes*
- /etc/polkit-1/localauthority/50-local.d/qubes-allow-all.pkla
- /etc/polkit-1/rules.d/00-qubes-allow-all.rules
- /etc/qubes-rpc/qubes.Filecopy
- /etc/qubes-rpc/qubes.OpenInVM
- /etc/qubes-rpc/qubes.GetAppmenus
- /etc/qubes-rpc/qubes.VMShell
- /etc/qubes-rpc/qubes.SyncNtpClock
- /etc/qubes-rpc/qubes.SuspendPre
- /etc/qubes-rpc/qubes.SuspendPost
- /etc/qubes-rpc/qubes.WaitForSession
- /etc/sudoers.d/qubes
- %config(noreplace) /etc/sysconfig/iptables
- %config(noreplace) /etc/sysconfig/ip6tables
- /etc/sysconfig/modules/qubes-core.modules
- /etc/sysconfig/modules/qubes-misc.modules
- %config(noreplace) /etc/tinyproxy/filter-qubes-yum
- %config(noreplace) /etc/tinyproxy/tinyproxy-qubes-yum.conf
- /etc/udev/rules.d/50-qubes-misc.rules
- /etc/udev/rules.d/99-qubes-block.rules
- /etc/udev/rules.d/99-qubes-network.rules
- /etc/udev/rules.d/99-qubes-usb.rules
- /etc/xdg/nautilus-actions/nautilus-actions.conf
- /etc/xen/scripts/vif-route-qubes
- %config(noreplace) /etc/yum.conf.d/qubes-proxy.conf
- %config(noreplace) /etc/yum.repos.d/qubes.repo
- /etc/yum/pluginconf.d/yum-qubes-hooks.conf
- /etc/yum/post-actions/qubes-trigger-sync-appmenus.action
- /sbin/qubes-serial-login
- /usr/bin/qvm-copy-to-vm
- /usr/bin/qvm-open-in-dvm
- /usr/bin/qvm-open-in-vm
- /usr/bin/qvm-run
- /usr/bin/qvm-mru-entry
- /usr/bin/xenstore-watch-qubes
- %dir /usr/lib/qubes
- /usr/lib/qubes/udev-block-add-change
- /usr/lib/qubes/udev-block-cleanup
- /usr/lib/qubes/udev-block-remove
- /usr/lib/qubes/udev-usb-add-change
- /usr/lib/qubes/udev-usb-remove
- /usr/lib/qubes/vusb-ctl.py*
- /usr/lib/qubes/dispvm-prerun.sh
- /usr/lib/qubes/sync-ntp-clock
- /usr/lib/qubes/prepare-suspend
- /usr/lib/qubes/meminfo-writer
- /usr/lib/qubes/network-manager-prepare-conf-dir
- /usr/lib/qubes/qfile-agent
- %attr(4755,root,root) /usr/lib/qubes/qfile-unpacker
- /usr/lib/qubes/qopen-in-vm
- /usr/lib/qubes/qrun-in-vm
- /usr/lib/qubes/qubes-download-dom0-updates.sh
- /usr/lib/qubes/qubes-fix-nm-conf.sh
- /usr/lib/qubes/qubes-setup-dnat-to-ns
- /usr/lib/qubes/qubes-trigger-sync-appmenus.sh
- /usr/lib/qubes/qvm-copy-to-vm.gnome
- /usr/lib/qubes/qvm-copy-to-vm.kde
- /usr/lib/qubes/serial.conf
- /usr/lib/qubes/setup-ip
- /usr/lib/qubes/vm-file-editor
- /usr/lib/qubes/wrap-in-html-if-url.sh
- /usr/lib/yum-plugins/yum-qubes-hooks.py*
- /usr/sbin/qubes-firewall
- /usr/sbin/qubes-netwatcher
- /usr/share/glib-2.0/schemas/org.gnome.settings-daemon.plugins.updates.gschema.override
- /usr/share/file-manager/actions/qvm-copy-gnome.desktop
- /usr/share/file-manager/actions/qvm-dvm-gnome.desktop
- %dir /home_volatile
- %attr(700,user,user) /home_volatile/user
- %dir /mnt/removable
- %package sysvinit
- Summary: Qubes unit files for SysV init style or upstart
- License: GPL v2 only
- Group: Qubes
- Requires: upstart
- Requires: qubes-core-vm
- Provides: qubes-core-vm-init-scripts
- Conflicts: qubes-core-vm-systemd
- %description sysvinit
- The Qubes core startup configuration for SysV init (or upstart).
- %files sysvinit
- /etc/init.d/qubes-core
- /etc/init.d/qubes-core-appvm
- /etc/init.d/qubes-core-netvm
- /etc/init.d/qubes-firewall
- /etc/init.d/qubes-netwatcher
- /etc/init.d/qubes-yum-proxy
- %post sysvinit
- #echo "--> Turning off unnecessary services..."
- # FIXME: perhaps there is more elegant way to do this?
- for f in /etc/init.d/*
- do
- srv=`basename $f`
- [ $srv = 'functions' ] && continue
- [ $srv = 'killall' ] && continue
- [ $srv = 'halt' ] && continue
- [ $srv = 'single' ] && continue
- [ $srv = 'reboot' ] && continue
- [ $srv = 'qubes-gui' ] && continue
- chkconfig $srv off
- done
- #echo "--> Enabling essential services..."
- chkconfig rsyslog on
- chkconfig haldaemon on
- chkconfig messagebus on
- chkconfig iptables on
- chkconfig ip6tables on
- chkconfig --add qubes-core || echo "WARNING: Cannot add service qubes-core!"
- chkconfig qubes-core on || echo "WARNING: Cannot enable service qubes-core!"
- chkconfig --add qubes-core-netvm || echo "WARNING: Cannot add service qubes-core-netvm!"
- chkconfig qubes-core-netvm on || echo "WARNING: Cannot enable service qubes-core-netvm!"
- chkconfig --add qubes-core-appvm || echo "WARNING: Cannot add service qubes-core-appvm!"
- chkconfig qubes-core-appvm on || echo "WARNING: Cannot enable service qubes-core-appvm!"
- chkconfig --add qubes-firewall || echo "WARNING: Cannot add service qubes-firewall!"
- chkconfig qubes-firewall on || echo "WARNING: Cannot enable service qubes-firewall!"
- chkconfig --add qubes-netwatcher || echo "WARNING: Cannot add service qubes-netwatcher!"
- chkconfig qubes-netwatcher on || echo "WARNING: Cannot enable service qubes-netwatcher!"
- chkconfig --add qubes-yum-proxy || echo "WARNING: Cannot add service qubes-yum-proxy!"
- chkconfig qubes-yum-proxy on || echo "WARNING: Cannot enable service qubes-yum-proxy!"
- # TODO: make this not display the silly message about security context...
- sed -i s/^id:.:initdefault:/id:3:initdefault:/ /etc/inittab
- %preun sysvinit
- if [ "$1" = 0 ] ; then
- # no more packages left
- chkconfig qubes-core off
- chkconfig qubes-core-netvm off
- chkconfig qubes-core-appvm off
- chkconfig qubes-firewall off
- chkconfig qubes-netwatcher off
- chkconfig qubes-yum-proxy off
- fi
- %package systemd
- Summary: Qubes unit files for SystemD init style
- License: GPL v2 only
- Group: Qubes
- Requires: systemd
- Requires(post): systemd-units
- Requires(preun): systemd-units
- Requires(postun): systemd-units
- Requires: qubes-core-vm
- Provides: qubes-core-vm-init-scripts
- Conflicts: qubes-core-vm-sysvinit
- %description systemd
- The Qubes core startup configuration for SystemD init.
- %files systemd
- %defattr(-,root,root,-)
- /lib/systemd/system/qubes-dvm.service
- /lib/systemd/system/qubes-meminfo-writer.service
- /lib/systemd/system/qubes-misc-post.service
- /lib/systemd/system/qubes-firewall.service
- /lib/systemd/system/qubes-netwatcher.service
- /lib/systemd/system/qubes-network.service
- /lib/systemd/system/qubes-sysinit.service
- /lib/systemd/system/qubes-update-check.service
- /lib/systemd/system/qubes-update-check.timer
- /lib/systemd/system/qubes-yum-proxy.service
- %dir /usr/lib/qubes/init
- /usr/lib/qubes/init/prepare-dvm.sh
- /usr/lib/qubes/init/network-proxy-setup.sh
- /usr/lib/qubes/init/misc-post.sh
- /usr/lib/qubes/init/misc-post-stop.sh
- /usr/lib/qubes/init/qubes-sysinit.sh
- /usr/lib/qubes/init/NetworkManager.service
- /usr/lib/qubes/init/NetworkManager-wait-online.service
- /usr/lib/qubes/init/cups.service
- /usr/lib/qubes/init/ntpd.service
- %ghost %attr(0644,root,root) /etc/systemd/system/NetworkManager.service
- %ghost %attr(0644,root,root) /etc/systemd/system/NetworkManager-wait-online.service
- %ghost %attr(0644,root,root) /etc/systemd/system/cups.service
- %post systemd
- for srv in qubes-dvm qubes-meminfo-writer qubes-sysinit qubes-misc-post qubes-netwatcher qubes-network qubes-firewall qubes-yum-proxy; do
- /bin/systemctl enable $srv.service 2> /dev/null
- done
- /bin/systemctl enable qubes-update-check.timer 2> /dev/null
- # Install overriden services only when original exists
- for srv in cups NetworkManager NetworkManager-wait-online ntpd; do
- if [ -f /lib/systemd/system/$srv.service ]; then
- cp /usr/lib/qubes/init/$srv.service /etc/systemd/system/$srv.service
- fi
- done
- # Set default "runlevel"
- rm -f /etc/systemd/system/default.target
- ln -s /lib/systemd/system/multi-user.target /etc/systemd/system/default.target
- DISABLE_SERVICES="alsa-store alsa-restore auditd avahi avahi-daemon backuppc cpuspeed crond"
- DISABLE_SERVICES="$DISABLE_SERVICES fedora-autorelabel fedora-autorelabel-mark ipmi hwclock-load hwclock-save"
- DISABLE_SERVICES="$DISABLE_SERVICES mdmonitor multipathd openct rpcbind mcelog fedora-storage-init fedora-storage-init-late"
- DISABLE_SERVICES="$DISABLE_SERVICES plymouth-start plymouth-read-write plymouth-quit plymouth-quit-wait"
- DISABLE_SERVICES="$DISABLE_SERVICES sshd tcsd sm-client sendmail mdmonitor-takeover"
- for srv in $DISABLE_SERVICES; do
- if [ -f /lib/systemd/system/$srv.service ]; then
- if fgrep -q '[Install]' /lib/systemd/system/$srv.service; then
- /bin/systemctl disable $srv.service 2> /dev/null
- else
- # forcibly disable
- ln -sf /dev/null /etc/systemd/system/$srv.service
- fi
- fi
- done
- rm -f /etc/systemd/system/getty.target.wants/getty@tty*.service
- # Enable some services
- /bin/systemctl enable iptables.service 2> /dev/null
- /bin/systemctl enable ip6tables.service 2> /dev/null
- /bin/systemctl enable rsyslog.service 2> /dev/null
- /bin/systemctl enable ntpd.service 2> /dev/null
- # Disable original service to enable overriden one
- /bin/systemctl disable NetworkManager.service 2> /dev/null
- # Disable D-BUS activation of NetworkManager - in AppVm it causes problems (eg PackageKit timeouts)
- /bin/systemctl mask dbus-org.freedesktop.NetworkManager.service 2> /dev/null
- /bin/systemctl enable NetworkManager.service 2> /dev/null
- # Enable cups only when it is real SystemD service
- [ -e /lib/systemd/system/cups.service ] && /bin/systemctl enable cups.service 2> /dev/null
- exit 0
- %postun systemd
- #Do not run this part on upgrades
- if [ "$1" != 0 ] ; then
- exit 0
- fi
- for srv in qubes-dvm qubes-meminfo-writer qubes-sysinit qubes-misc-post qubes-netwatcher qubes-network; do
- /bin/systemctl disable $srv.service
- do
|