AboutDialog About Qubes OS Qubes OS release Release notes OK Version Information Backup Total size: 0 Backup destination directory ... Backup security <html><head/><body>Encryption / Verification passphrase:</body></html> <html><head/><body>Reenter passphrase:</body></html> You're about to perform the following actions: To continue press Next. Backup in progress... When finished, open file selection dialog to allow me to unmount the disk Qubes OS - Backup qubes Select qubes to backup: Compress the backup Warning: unrecognized data found in configuration files. Target qube: Backup directory or command: Save backup profile Save settings as default backup profile: <html><head/><body>WARNING: password will be saved in dom0 in plain text. The file is located in dom0 in /etc/qubes/backup/qubes-manager-backup .</body></html> NOTE: Only running qubes are listed. Other Turn computer off after backup is finished <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Sans'; font-size:10pt; font-weight:400; font-style:normal;"> </body></html> BackupVMsWindow Backup in progress... Error loading backup profile Unable to load saved backup profile. Qubes Backup VMs BootDialog Boot from device Boot qube from device from existing block device from file in qube ... Clipboard Warning! Error while accessing Qubes clipboard! Error while locking Qubes clipboard! Error while writing to Qubes clipboard! %n byte(s) byte bytes ? bytes CloneVMThread Success The qube was cloned successfully. Error while cloning qube! Command {command} failed exception DevListWidgetItem Service already on the list! Error re-assigning device Refresh in progress... Refresh Applications Dialog Select devices Which PCI devices should use the no strict reset option? Note: use this option only if "unable to reset PCI device" error occurs. GlobalSettings Qubes Global Settings System defaults ClockVM: Default netVM: Default template: Default memory settings MiB dom0 memory boost: Kernel Default kernel: Updates Check for dom0 updates Dom0 UpdateVM: This is updateVM ONLY for dom0; if you want to change updateVMs for other VMs, use /etc/qubes-rpc/policy/qubes.UpdatesProxy Default DisposableVM Template: Minimal qube memory: Stable updates Testing updates (security only) Testing updates Unstable updates Disable checking for updates for all qubes Default value for new qubes; to change it for existing qubes, use buttons below. Check for qube updates by default Enable checking for updates for all qubes ITL template updates ITL template updates (testing) (Community templates disabled) Community template updates Community template updates (testing) qrexec call stderr was not empty qrexec call exited with non-zero return code GlobalSettingsWindow Change state of all qubes Are you sure you want to set all qubes to check for updates? Are you sure you want to set all qubes to not check for updates? ERROR! Error managing {repo} repository settings: {msg} Cannot detect enabled dom0 update repositories Cannot detect enabled ITL template update repositories qrexec call stdout did not contain "ok" as expected Qubes Global Settings InformationNotesDialog More Information LogDialog (Showing only last %d bytes of file) Dialog Copy Dom0 clipboard to Qubes clipboard Copy to Qubes clipboard MainWindow Template Manager Change all selected to: <html><head/><body>To select all qubes with a given template, double-click the template name in any row.IMPORTANT: Changes will be applied only when you click OK.</body></html> Clear Selection ManagerUtils default ({}) (none) (current) Unexpected characters in path. - Global property {} - {0} for qube {1} Houston, we have a problem... Whoops. A critical error has occured. This is most likely a bug in Qubes Manager. {0} at line {1} of file {2}. MultiSelectWidget Form Available >> > < << Selected NewFwRuleDlg Firewall rule You need to fill service name/port for TCP/UDP rule New Address Protocol Address TCP UDP Any Invalid address Address '{0}' is invalid. Invalid port or service Port number or service '{0}' is invalid. Port/Service <html><head/><body>Port/service can be provided as either port number (e.g. 122), port range (1024-1234) or service name (e.g. smtp) . For full list of services known, see /etc/services in dom0.</body></html> NewVMDlg Name and label: Create new qube Networking: Template: my-new-qube Type: launch settings after creation Basic install system from device (also available from settings) provides network to other qubes Initial RAM (also available from settings) <html><head/><body>Caution: changing these settings can compromise your system or make the qube unable to boot. Use only if you know what you are doing.</body></html> Storage pool Advanced (default) MB NewVmDlg No template available! Cannot create a qube when no template exists. Qube based on a template (AppVM) Standalone qube copied from a template Empty standalone qube (install your own OS) Incorrect qube name! A qube with the name {} already exists in the system! Error creating the qube! Creating new qube {0}... ERROR: {0} QubeManager n/a Yes default ({}) Check updates Updates pending! Qube outdated The qube must be restarted for its filesystem to reflect the template's recent committed changes. Template running The Template must be stopped before changes from its current session can be picked up by this qube. QubesFirewallRulesModel At least one rule must exist. Last rule must be either drop all or accept all. Rule type unknown! No blacklist support. it does not add up. ICMP must be allowed. DNS must be allowed RefreshAppsVMThread Refresh in progress (refreshing applications from {}) Refresh failed! ReleaseNotesDialog Qubes Release Notes RemoveVMThread Error removing qube! RenameVMThread Warning: rename partially unsuccessful! Some properties could not be changed to the new name. The system has now both {} and {} qubes. To resolve this, please check and change the following properties and remove the qube {} manually. Rename error! Restore Restore options Ignore missing templates or netvms, restore VMs anyway. Ignore dom0 username mismatch while restoring homedir. ignore username mismatch Verify backup integrity, do not restore the data Backup source location ... <html><head/><body>Backup file: (for old backup format select qubes.xml file)</body></html> Security options Encrypted backup: <html><head/><body>Decryption / Verification passphrase:</body></html> You're about to perform the following actions: To continue press Next. When finished, open file selection dialog to allow me to unmount the disk Qubes OS - Restore qubes ignore missing templates and net VMs Qube: Qubes to restore <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;"> </body></html> <html><head/><body>WARNING: restored dom0 files are located in ~/home-restore-<timestamp> directory</body></html> RestoreThread Partially restored files left in /var/tmp/restore_*, investigate them and/or clean them up Finished with errors! Finished successfully! RestoreVMsWindow Restore error! Please unmount your backup volume and cancel the file selection dialog. Aborting the operation... Restore qubes Qubes Restore VMs RunCommandThread Error while running command! SettingsDialog Settings <html><head/><body>Name && label*:</body></html> ---- <html><head/><body>Template*:</body></html> Include in backups by default Run in debug mode General Type: --- Installed by RPM: Disk storage Private storage max. size: System storage max. size: Networking IP: Netmask: Gateway: Basic Memory/CPU Initial memory: Max memory: VCPUs no.: Include in memory balancing Dynamic memory balancing can result in some devices not working! Other Kernel Kernel: Kernel opts: [] Advanced Allow full access for min Firewall rules You've enabled dynamic memory balancing, some devices might not work! Devices Applications Checked services will be turned on. Unchecked services will be turned off. Unlisted services will follow default settings. Services MiB Virtual DNS: <html><head/><body>* Cannot be changed while the qube is running</body></html> Networking: Rename <html><head/><body>"default ([name])" denotes system-wide default - if the default is changed in Global Settings, the networking qube will change. If you want to keep using a given networking qube regardless of system settings, select "[name]".</body></html> Start qube automatically on boot Delete qube Clone qube WARNING: PVH mode requires Linux 4.11 or newer. Virtualization Mode: Using PV mode exposes more hypervisor attack surface! PVH mode is hidden since it doesn't support PCI passthrough. PVH mode is recommended if possible (Linux kernel 4.11 or newer, no PCI passthrough). For Windows qubes always use HVM. MB Provides network <html><head/><body>Allows using this qube as a template for DisposableVMs. The DisposableVMs will inherit the VM's state (configuration, installed programs etc.), but their state will not persist between restarts. Setting this option will cause this qube to be listed as an option in the "Default DisposableVM Template" dropdown for all other qubes. </body></html> Disposable VM Template Boot qube from CDROM Windows (with Qubes Windows Tools installed) only. The qube must be running to enable seamless mode; this setting is not persistent. Enable seamless mode Windows (with Qubes Windows Tools installed) only. The qube must be running to disable seamless mode; this setting is not persistent. Disable seamless mode <html><head/><body>Which qube should be used by default as a template for DisposableVMs started from this one? DisposableVMs will inherit their template's configuration and installed programs. For a qube to to appear in this list, it must have the "DisposableVM Template" checkbox enabled. </body></html> Default DisposableVM Template This qube has no networking - it will not have any network access anyway. Networking qube does not support 'qubes-firewall' - firewall restrictions will not be applied. Firewall has been modified manually - please use qvm-firewall for any further configuration. Allow all outgoing Internet connections Changing firewall settings does NOT affect existing connections. Limit outgoing Internet connections to ... List of allowed (whitelisted) addresses: NOTE: To block all network access, set Networking to (none) on the Basic settings tab. This tab provides a very simplified firewall configuration. All DNS requests and ICMP (pings) will be allowed. For more granular control, use the command line tool qvm-firewall. To modify PCI devices you have to turn off the qube. Currently PVH qubes don't support PCI passthrough. Select another virtualization mode if you want to add PCI devices Configure strict reset for PCI devices Refresh Applications Services listed here are only base Qubes services - other services may be installed and implemented. <html><head/><body>Caution: The Default DisposableVM Template (see the Advanced tab) has a different Networking setting than this qube. This configuration may result in unexpected network access. For example, you may have set this qube's Networking to "none" in order to prevent any data from being transmitted out. However, if the Default DisposableVM Template's Networking is set to "sys-firewall," then a DisposableVM started from this qube may be able to transmit data out, contrary to your intention. You may wish to set the Default DisposableVM Template for this qube to one with equally restrictive Networking settings.</body></html> This qube has direct network access - to configure its firewall, use a dedicated firewall qube. TemplateManager qube is running TemplateManagerWindow Errors encountered! Errors encountered on template change in the following qubes: {}. (select template) Qube Current New Template Manager UpdateVMThread Debian DSA-4371 fix installed in {} Failed to apply DSA-4371 fix: {} Error on qube update! VMBootFromDeviceWindow Boot {vm} from device ERROR! No file or block device selected; please select one. Warning! Qube must be turned off before booting it from device. Please turn off the qube. Failed to display file selection dialog Check if the qube {0} can be started and has a file manager installed. Boot Qube From Device VMSettingsWindow Settings: {vm} Error while changing settings for {0}! ERROR: {0} Error while saving changes: Firewall tab: Applications tab: Warning! Max memory can not be less than initial memory. Setting max memory to equal initial memory. Initial memory can not be less than one tenth Max memory. Setting initial memory to the minimum allowed value. Delete qube (cannot delete a running qube) To change system storage size, change properties of the underlying template. Qube cannot be renamed! The following qubes using this qube as a template are running: {}. In order to rename this qube, you must first shut them down. Rename qube New name: (WARNING: all other changes will be discarded) Renaming Qube... Qube cannot be removed! This qube cannot be removed. It is used as: {} If you want to remove this qube, you should remove or change settings of each qube or setting that uses it. Delete qube Are you absolutely sure you want to delete this qube? All qube settings and data will be irrevocably deleted. If you are sure, please enter this qube's name below. Removal cancelled The qube will not be removed. Clone qube Name for the cloned qube: Cloning Qube... No finished thread found Basic tab: Advanced tab: Devices tab: Sevices tab: Cannot change this setting while this qube is used as a NetVM by the following qubes: Qube Settings VmListItem Wait! Enter backup target location first. Selected directory do not exists or not a directory (%s). Enter passphrase for backup encryption/verification first. Enter the same passphrase in both fields. ERROR: {} Backup finished. Please unmount your backup volume and cancel the file selection dialog. Backup aborted! Backup error ERROR: Aborted Error cancelling backup! VmManagerWindow Manager settings unreadable Qube Manager settings cannot be parsed. Previously saved display settings may not be restored correctly. Error: {} Loading Qube Manager... Qube Manager Warning! This qube cannot be removed. It is used as: {} If you want to remove this qube, you should remove or change settings of each qube or setting that uses it. Qube Removal Confirmation Are you sure you want to remove the Qube '{0}'? All data on this Qube's private storage will be lost! Type the name of the Qube ({1}) below to confirm: Qube removal confirmation failed Entered name did not match! Not removing {0}. Qubes clone Qube Enter name for Qube {} clone: Name already in use! There already exists a qube called '{}'. Cloning aborted. Cloning Qube... Error unpausing Qube! ERROR: {0} Error pausing Qube! Qube Shutdown Confirmation Are you sure you want to power down the Qube '{0}'? This will shutdown all the running applications within this Qube. Error shutting down Qube! Qube Restart Confirmation Are you sure you want to restart the Qube '{0}'? This will shutdown all the running applications within this Qube. Qube '{0}' is not running. Are you absolutely sure you want to try to kill it? This will end (not shutdown!) all the running applications within this Qube. Are you sure you want to kill the Qube '{0}'? This will end (not shutdown!) all the running applications within this Qube. Qube Kill Confirmation Error while killing Qube! An exception ocurred while killing {0}. ERROR: {1} Qube Update Confirmation {0} The Qube has to be running to be updated. Do you want to start it? Qubes command entry Run command in {}: Search: Nowy wiersz Name Qube name State Update info Template Qube template NetVM Qube netVM Disk usage Internal IP Include in backups Last backup Default DisposableVM Template DisposableVM Template Virtualization Mode &System &View &Qube &Logs &About toolBar Create &new qube Create a new qube &Delete qube Remove an existing qube (must be stopped first) Start/Resu&me qube Start/Resume selected qube &Pause qube Pause selected qubeStops all CPU activity in the selected VM until the VM is unpaused. This action does not change how much memory is allocated to the VM. (EXPERIMENTAL) &Shutdown qube Shutdown selected qube Restar&t qube Restart selected qube Add/remove app s&hortcuts Add/remove app shortcuts for this qube &Update qube Update qube system Edit qube &firewall rules Edit qube firewall rules Show graphs Show Graphs Options View &Template &NetVM Qube s&ettings Qube Settings &Restore qubes from backup Restore qubes from backup &Backup qubes Backup qubes &Global settings &Qubes Network &State &Kill qube Kill selected qube Set keyboard la&yout Set keyboard layout per qube T&ype Qube Type &Label N&ame Show tool bar Show menu bar &Qubes OS Si&ze Size on disk &Run command in qube Run command in the specified qube &Clone qube Clone qube Inte&rnal Is an internal qube Start qube for Window Tools installation &IP Include in &backups Last back&up Search Ctrl+F &Exit Qube Manager Manage templates for qubes Launch a tool that allows multiple templates to be changed at once Default DisposableVM Template <html><head/><body>Default DisposableVM Template Which qube should be used by default as a template for DisposableVMs started from this one? DisposableVMs will inherit their template's configuration and installed programs.</body></html> DisposableVM Template <html><head/><body>DisposableVM Template Allows using this qube as a template for DisposableVMs. The DisposableVMs will inherit the VM's state (configuration, installed programs etc.), but their state will not persist between restarts. </body></html> No finished thread found Cloning qube... VmShutdownMonitor Qube Shutdown The Qube '{0}' hasn't shutdown within the last {1} seconds, do you want to kill it? Kill it! Wait another {0} seconds... appname Create qube dialog Select backup location. Nothing selected! No file or directory selected. template-manager Cannot change template on a running VM.