- Updated to kernel 4.19.53

- Added patches for two ARM errata that cause hangs in specific cpu states

- Disabled some power management features:
  - Disabled suspend at the kernel level since it is broken/unsupported in the mainline kernel
  - Disabled APM emulation

- Disabled some USB features:
  - Disabled USB default persist
  - Disabled USB dynamic minors

- Disabled USB monitoring for debug, shouldn't be enabled by default
- Disabled USB 3.0 support, shouldn't be enabled as the c201 has no 3.0 ports

- removed two patches that have made it into 4.19
- removed the debug options from the cmdline
- made the kernel build script announce what patch is being applied
- removed light-locker, as it does not function properly

makefile

@@ -13,7 +13,7 @@
 # You should have received a copy of the GNU General Public License
 # along with PrawnOS.  If not, see <https://www.gnu.org/licenses/>.
 
-KVER=4.19.49
+KVER=4.19.53
 ifeq ($(PRAWNOS_SUITE),)
 PRAWNOS_SUITE=buster
 endif

resources/BuildResources/cmdline

@@ -1 +1 @@
-console=tty1 init=/sbin/init root=PARTUUID=%U/PARTNROFF=1 rootfstype=ext4 rootwait ro net.ifnames=0 console=ttyS2,115200n8 earlyprintk=ttyS2,115200n8 loglevel=4
+console=tty1 init=/sbin/init root=PARTUUID=%U/PARTNROFF=1 rootfstype=ext4 rootwait ro net.ifnames=0

resources/BuildResources/config

@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Linux/arm 4.19.49-gnu Kernel Configuration
+# Linux/arm 4.19.53-gnu Kernel Configuration
 #
 
 #
@@ -360,8 +360,12 @@ CONFIG_ARM_ERRATA_773022=y
 CONFIG_ARM_ERRATA_818325_852422=y
 CONFIG_ARM_ERRATA_821420=y
 CONFIG_ARM_ERRATA_825619=y
+CONFIG_ARM_ERRATA_857271=y
+CONFIG_ARM_ERRATA_CR711784_A12=y
 # CONFIG_ARM_ERRATA_852421 is not set
-CONFIG_ARM_ERRATA_852423=y
+# CONFIG_ARM_ERRATA_852423 is not set
+# CONFIG_ARM_ERRATA_857272 is not set
+# CONFIG_ARM_ERRATA_CR711784_A17 is not set
 
 #
 # Bus support
@@ -483,7 +487,6 @@ CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
 # CONFIG_ARM_ATAG_DTB_COMPAT is not set
 CONFIG_CMDLINE=""
-# CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
 CONFIG_AUTO_ZRELADDR=y
 # CONFIG_EFI is not set
@@ -550,24 +553,14 @@ CONFIG_KERNEL_MODE_NEON=y
 #
 # Power management options
 #
-CONFIG_SUSPEND=y
+# CONFIG_SUSPEND is not set
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_SUSPEND_SKIP_SYNC is not set
 # CONFIG_HIBERNATION is not set
-CONFIG_PM_SLEEP=y
-CONFIG_PM_SLEEP_SMP=y
-# CONFIG_PM_AUTOSLEEP is not set
-# CONFIG_PM_WAKELOCKS is not set
 CONFIG_PM=y
-CONFIG_PM_DEBUG=y
+# CONFIG_PM_DEBUG is not set
-CONFIG_PM_ADVANCED_DEBUG=y
+# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_TEST_SUSPEND is not set
-CONFIG_PM_SLEEP_DEBUG=y
-CONFIG_APM_EMULATION=y
 CONFIG_PM_CLK=y
 CONFIG_PM_GENERIC_DOMAINS=y
 # CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
-CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
 CONFIG_PM_GENERIC_DOMAINS_OF=y
 CONFIG_CPU_PM=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
@@ -1590,7 +1583,6 @@ CONFIG_INPUT_MATRIXKMAP=y
 # CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_APMPOWER is not set
 
 #
 # Input Device Drivers
@@ -1658,7 +1650,6 @@ CONFIG_TTY=y
 CONFIG_VT=y
 CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
-CONFIG_VT_CONSOLE_SLEEP=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
 CONFIG_UNIX98_PTYS=y
@@ -1982,7 +1973,6 @@ CONFIG_SYSCON_REBOOT_MODE=y
 CONFIG_POWER_SUPPLY=y
 # CONFIG_POWER_SUPPLY_DEBUG is not set
 # CONFIG_PDA_POWER is not set
-# CONFIG_APM_POWER is not set
 # CONFIG_GENERIC_ADC_BATTERY is not set
 # CONFIG_TEST_POWER is not set
 # CONFIG_CHARGER_ADP5061 is not set
@@ -2836,24 +2826,20 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 #
 # Miscellaneous USB options
 #
-CONFIG_USB_DEFAULT_PERSIST=y
+# CONFIG_USB_DEFAULT_PERSIST is not set
-CONFIG_USB_DYNAMIC_MINORS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_OTG=y
+# CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_OTG_FSM is not set
 # CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
-CONFIG_USB_MON=y
+# CONFIG_USB_MON is not set
 # CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
-CONFIG_USB_XHCI_HCD=y
+# CONFIG_USB_XHCI_HCD is not set
-# CONFIG_USB_XHCI_DBGCAP is not set
-CONFIG_USB_XHCI_PCI=y
-CONFIG_USB_XHCI_PLATFORM=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y

resources/BuildResources/patches-tested/kernel/fix-dma-cache-alignment-issues.patch

@@ -1,52 +0,0 @@
-usb: dwc2: Fix DMA cache alignment issues
-
-
-Insert a padding between data and the stored_xfer_buffer pointer to
-ensure they are not on the same cache line.
-
-Otherwise, the stored_xfer_buffer gets corrupted for IN URBs on
-non-cache-coherent systems. (In my case: Lantiq xRX200 MIPS)
-
-Fixes: 3bc04e28a030 ("usb: dwc2: host: Get aligned DMA in a more supported way")
-Fixes: 56406e017a88 ("usb: dwc2: Fix DMA alignment to start at allocated boundary")
-Signed-off-by: Martin Schiller <ms@dev.tdt.de>
----
- drivers/usb/dwc2/hcd.c | 10 +++++++---
- 1 file changed, 7 insertions(+), 3 deletions(-)
-
-diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
-index dd82fa516f3f..f3035dd4db25 100644
---- a/drivers/usb/dwc2/hcd.c
-+++ b/drivers/usb/dwc2/hcd.c
-@@ -2664,8 +2664,10 @@  static void dwc2_free_dma_aligned_buffer(struct urb *urb)
- 		return;
- 
- 	/* Restore urb->transfer_buffer from the end of the allocated area */
--	memcpy(&stored_xfer_buffer, urb->transfer_buffer +
--	       urb->transfer_buffer_length, sizeof(urb->transfer_buffer));
-+	memcpy(&stored_xfer_buffer,
-+	       PTR_ALIGN(urb->transfer_buffer + urb->transfer_buffer_length,
-+			 dma_get_cache_alignment()),
-+	       sizeof(urb->transfer_buffer));
- 
- 	if (usb_urb_dir_in(urb)) {
- 		if (usb_pipeisoc(urb->pipe))
-@@ -2697,6 +2699,7 @@  static int dwc2_alloc_dma_aligned_buffer(struct urb *urb, gfp_t mem_flags)
- 	 * DMA
- 	 */
- 	kmalloc_size = urb->transfer_buffer_length +
-+		(dma_get_cache_alignment() - 1) +
- 		sizeof(urb->transfer_buffer);
- 
- 	kmalloc_ptr = kmalloc(kmalloc_size, mem_flags);
-@@ -2707,7 +2710,8 @@  static int dwc2_alloc_dma_aligned_buffer(struct urb *urb, gfp_t mem_flags)
- 	 * Position value of original urb->transfer_buffer pointer to the end
- 	 * of allocation for later referencing
- 	 */
--	memcpy(kmalloc_ptr + urb->transfer_buffer_length,
-+	memcpy(PTR_ALIGN(kmalloc_ptr + urb->transfer_buffer_length,
-+			 dma_get_cache_alignment()),
- 	       &urb->transfer_buffer, sizeof(urb->transfer_buffer));
- 
- 	if (usb_urb_dir_out(urb))
-

resources/BuildResources/patches-tested/kernel/fix-wMaxPackerSize-handling-fix-webcam-regression.patch

@@ -1,242 +0,0 @@
-usb: dwc2: host: Fix wMaxPacketSize handling (fix webcam regression)
-
-In commit abb621844f6a ("usb: ch9: make usb_endpoint_maxp() return
-only packet size") the API to usb_endpoint_maxp() changed.  It used to
-just return wMaxPacketSize but after that commit it returned
-wMaxPacketSize with the high bits (the multiplier) masked off.  If you
-wanted to get the multiplier it was now up to your code to call the
-new usb_endpoint_maxp_mult() which was introduced in
-commit 541b6fe63023 ("usb: add helper to extract bits 12:11 of
-wMaxPacketSize").
-
-Prior to the API change most host drivers were updated, but no update
-was made to dwc2.  Presumably it was assumed that dwc2 was too
-simplistic to use the multiplier and thus just didn't support a
-certain class of USB devices.  However, it turns out that dwc2 did use
-the multiplier and many devices using it were working quite nicely.
-That means that many USB devices have been broken since the API
-change.  One such device is a Logitech HD Pro Webcam C920.
-
-Specifically, though dwc2 didn't directly call usb_endpoint_maxp(), it
-did call usb_maxpacket() which in turn called usb_endpoint_maxp().
-
-Let's update dwc2 to work properly with the new API.
-
-Fixes: abb621844f6a ("usb: ch9: make usb_endpoint_maxp() return only packet size")
-Cc: stable@vger.kernel.org
-Signed-off-by: Douglas Anderson <dianders@chromium.org>
-
----
-
- drivers/usb/dwc2/hcd.c       | 29 +++++++++++++++++------------
- drivers/usb/dwc2/hcd.h       | 20 +++++++++++---------
- drivers/usb/dwc2/hcd_intr.c  |  5 +++--
- drivers/usb/dwc2/hcd_queue.c | 10 ++++++----
- 4 files changed, 37 insertions(+), 27 deletions(-)
-
-diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
-index b50ec3714fd8..5c51bf5506d1 100644
---- a/drivers/usb/dwc2/hcd.c
-+++ b/drivers/usb/dwc2/hcd.c
-@@ -2608,7 +2608,7 @@ static int dwc2_assign_and_init_hc(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
- 	chan->dev_addr = dwc2_hcd_get_dev_addr(&urb->pipe_info);
- 	chan->ep_num = dwc2_hcd_get_ep_num(&urb->pipe_info);
- 	chan->speed = qh->dev_speed;
--	chan->max_packet = dwc2_max_packet(qh->maxp);
-+	chan->max_packet = qh->maxp;
- 
- 	chan->xfer_started = 0;
- 	chan->halt_status = DWC2_HC_XFER_NO_HALT_STATUS;
-@@ -2686,7 +2686,7 @@ static int dwc2_assign_and_init_hc(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
- 		 * This value may be modified when the transfer is started
- 		 * to reflect the actual transfer length
- 		 */
--		chan->multi_count = dwc2_hb_mult(qh->maxp);
-+		chan->multi_count = qh->maxp_mult;
- 
- 	if (hsotg->params.dma_desc_enable) {
- 		chan->desc_list_addr = qh->desc_list_dma;
-@@ -3806,19 +3806,21 @@ static struct dwc2_hcd_urb *dwc2_hcd_urb_alloc(struct dwc2_hsotg *hsotg,
- 
- static void dwc2_hcd_urb_set_pipeinfo(struct dwc2_hsotg *hsotg,
- 				      struct dwc2_hcd_urb *urb, u8 dev_addr,
--				      u8 ep_num, u8 ep_type, u8 ep_dir, u16 mps)
-+				      u8 ep_num, u8 ep_type, u8 ep_dir,
-+				      u16 maxp, u16 maxp_mult)
- {
- 	if (dbg_perio() ||
- 	    ep_type == USB_ENDPOINT_XFER_BULK ||
- 	    ep_type == USB_ENDPOINT_XFER_CONTROL)
- 		dev_vdbg(hsotg->dev,
--			 "addr=%d, ep_num=%d, ep_dir=%1x, ep_type=%1x, mps=%d\n",
--			 dev_addr, ep_num, ep_dir, ep_type, mps);
-+			 "addr=%d, ep_num=%d, ep_dir=%1x, ep_type=%1x, maxp=%d (%d mult)\n",
-+			 dev_addr, ep_num, ep_dir, ep_type, maxp, maxp_mult);
- 	urb->pipe_info.dev_addr = dev_addr;
- 	urb->pipe_info.ep_num = ep_num;
- 	urb->pipe_info.pipe_type = ep_type;
- 	urb->pipe_info.pipe_dir = ep_dir;
--	urb->pipe_info.mps = mps;
-+	urb->pipe_info.maxp = maxp;
-+	urb->pipe_info.maxp_mult = maxp_mult;
- }
- 
- /*
-@@ -3909,8 +3911,9 @@ void dwc2_hcd_dump_state(struct dwc2_hsotg *hsotg)
- 					dwc2_hcd_is_pipe_in(&urb->pipe_info) ?
- 					"IN" : "OUT");
- 				dev_dbg(hsotg->dev,
--					"      Max packet size: %d\n",
--					dwc2_hcd_get_mps(&urb->pipe_info));
-+					"      Max packet size: %d (%d mult)\n",
-+					dwc2_hcd_get_maxp(&urb->pipe_info),
-+					dwc2_hcd_get_maxp_mult(&urb->pipe_info));
- 				dev_dbg(hsotg->dev,
- 					"      transfer_buffer: %p\n",
- 					urb->buf);
-@@ -4510,8 +4513,10 @@ static void dwc2_dump_urb_info(struct usb_hcd *hcd, struct urb *urb,
- 	}
- 
- 	dev_vdbg(hsotg->dev, "  Speed: %s\n", speed);
--	dev_vdbg(hsotg->dev, "  Max packet size: %d\n",
--		 usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)));
-+	dev_vdbg(hsotg->dev, "  Max packet size: %d (%d mult)\n",
-+		 usb_endpoint_maxp(&urb->ep->desc),
-+		 usb_endpoint_maxp_mult(&urb->ep->desc));
-+
- 	dev_vdbg(hsotg->dev, "  Data buffer length: %d\n",
- 		 urb->transfer_buffer_length);
- 	dev_vdbg(hsotg->dev, "  Transfer buffer: %p, Transfer DMA: %08lx\n",
-@@ -4594,8 +4599,8 @@ static int _dwc2_hcd_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
- 	dwc2_hcd_urb_set_pipeinfo(hsotg, dwc2_urb, usb_pipedevice(urb->pipe),
- 				  usb_pipeendpoint(urb->pipe), ep_type,
- 				  usb_pipein(urb->pipe),
--				  usb_maxpacket(urb->dev, urb->pipe,
--						!(usb_pipein(urb->pipe))));
-+				  usb_endpoint_maxp(&ep->desc),
-+				  usb_endpoint_maxp_mult(&ep->desc));
- 
- 	buf = urb->transfer_buffer;
- 
-diff --git a/drivers/usb/dwc2/hcd.h b/drivers/usb/dwc2/hcd.h
-index c089ffa1f0a8..ce6445a06588 100644
---- a/drivers/usb/dwc2/hcd.h
-+++ b/drivers/usb/dwc2/hcd.h
-@@ -171,7 +171,8 @@ struct dwc2_hcd_pipe_info {
- 	u8 ep_num;
- 	u8 pipe_type;
- 	u8 pipe_dir;
--	u16 mps;
-+	u16 maxp;
-+	u16 maxp_mult;
- };
- 
- struct dwc2_hcd_iso_packet_desc {
-@@ -264,6 +265,7 @@ struct dwc2_hs_transfer_time {
-  *                       - USB_ENDPOINT_XFER_ISOC
-  * @ep_is_in:           Endpoint direction
-  * @maxp:               Value from wMaxPacketSize field of Endpoint Descriptor
-+ * @maxp_mult:          Multiplier for maxp
-  * @dev_speed:          Device speed. One of the following values:
-  *                       - USB_SPEED_LOW
-  *                       - USB_SPEED_FULL
-@@ -340,6 +342,7 @@ struct dwc2_qh {
- 	u8 ep_type;
- 	u8 ep_is_in;
- 	u16 maxp;
-+	u16 maxp_mult;
- 	u8 dev_speed;
- 	u8 data_toggle;
- 	u8 ping_state;
-@@ -503,9 +506,14 @@ static inline u8 dwc2_hcd_get_pipe_type(struct dwc2_hcd_pipe_info *pipe)
- 	return pipe->pipe_type;
- }
- 
--static inline u16 dwc2_hcd_get_mps(struct dwc2_hcd_pipe_info *pipe)
-+static inline u16 dwc2_hcd_get_maxp(struct dwc2_hcd_pipe_info *pipe)
-+{
-+	return pipe->maxp;
-+}
-+
-+static inline u16 dwc2_hcd_get_maxp_mult(struct dwc2_hcd_pipe_info *pipe)
- {
--	return pipe->mps;
-+	return pipe->maxp_mult;
- }
- 
- static inline u8 dwc2_hcd_get_dev_addr(struct dwc2_hcd_pipe_info *pipe)
-@@ -620,12 +628,6 @@ static inline bool dbg_urb(struct urb *urb)
- static inline bool dbg_perio(void) { return false; }
- #endif
- 
--/* High bandwidth multiplier as encoded in highspeed endpoint descriptors */
--#define dwc2_hb_mult(wmaxpacketsize) (1 + (((wmaxpacketsize) >> 11) & 0x03))
--
--/* Packet size for any kind of endpoint descriptor */
--#define dwc2_max_packet(wmaxpacketsize) ((wmaxpacketsize) & 0x07ff)
--
- /*
-  * Returns true if frame1 index is greater than frame2 index. The comparison
-  * is done modulo FRLISTEN_64_SIZE. This accounts for the rollover of the
-diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c
-index 88b5dcf3aefc..a052d39b4375 100644
---- a/drivers/usb/dwc2/hcd_intr.c
-+++ b/drivers/usb/dwc2/hcd_intr.c
-@@ -1617,8 +1617,9 @@ static void dwc2_hc_ahberr_intr(struct dwc2_hsotg *hsotg,
- 
- 	dev_err(hsotg->dev, "  Speed: %s\n", speed);
- 
--	dev_err(hsotg->dev, "  Max packet size: %d\n",
--		dwc2_hcd_get_mps(&urb->pipe_info));
-+	dev_err(hsotg->dev, "  Max packet size: %d (mult %d)\n",
-+		dwc2_hcd_get_maxp(&urb->pipe_info),
-+		dwc2_hcd_get_maxp_mult(&urb->pipe_info));
- 	dev_err(hsotg->dev, "  Data buffer length: %d\n", urb->length);
- 	dev_err(hsotg->dev, "  Transfer buffer: %p, Transfer DMA: %08lx\n",
- 		urb->buf, (unsigned long)urb->dma);
-diff --git a/drivers/usb/dwc2/hcd_queue.c b/drivers/usb/dwc2/hcd_queue.c
-index ea3aa640c15c..68bbac64b753 100644
---- a/drivers/usb/dwc2/hcd_queue.c
-+++ b/drivers/usb/dwc2/hcd_queue.c
-@@ -708,7 +708,7 @@ static void dwc2_hs_pmap_unschedule(struct dwc2_hsotg *hsotg,
- static int dwc2_uframe_schedule_split(struct dwc2_hsotg *hsotg,
- 				      struct dwc2_qh *qh)
- {
--	int bytecount = dwc2_hb_mult(qh->maxp) * dwc2_max_packet(qh->maxp);
-+	int bytecount = qh->maxp_mult * qh->maxp;
- 	int ls_search_slice;
- 	int err = 0;
- 	int host_interval_in_sched;
-@@ -1332,7 +1332,7 @@ static int dwc2_check_max_xfer_size(struct dwc2_hsotg *hsotg,
- 	u32 max_channel_xfer_size;
- 	int status = 0;
- 
--	max_xfer_size = dwc2_max_packet(qh->maxp) * dwc2_hb_mult(qh->maxp);
-+	max_xfer_size = qh->maxp * qh->maxp_mult;
- 	max_channel_xfer_size = hsotg->params.max_transfer_size;
- 
- 	if (max_xfer_size > max_channel_xfer_size) {
-@@ -1517,8 +1517,9 @@ static void dwc2_qh_init(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
- 	u32 prtspd = (hprt & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT;
- 	bool do_split = (prtspd == HPRT0_SPD_HIGH_SPEED &&
- 			 dev_speed != USB_SPEED_HIGH);
--	int maxp = dwc2_hcd_get_mps(&urb->pipe_info);
--	int bytecount = dwc2_hb_mult(maxp) * dwc2_max_packet(maxp);
-+	int maxp = dwc2_hcd_get_maxp(&urb->pipe_info);
-+	int maxp_mult = dwc2_hcd_get_maxp_mult(&urb->pipe_info);
-+	int bytecount = maxp_mult * maxp;
- 	char *speed, *type;
- 
- 	/* Initialize QH */
-@@ -1531,6 +1532,7 @@ static void dwc2_qh_init(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
- 
- 	qh->data_toggle = DWC2_HC_PID_DATA0;
- 	qh->maxp = maxp;
-+	qh->maxp_mult = maxp_mult;
- 	INIT_LIST_HEAD(&qh->qtd_list);
- 	INIT_LIST_HEAD(&qh->qh_list_entry);
- 
--- 
-2.22.0.rc1.311.g5d7573a151-goog
-
-  

scripts/InstallScripts/InstallPackages.sh

@@ -111,6 +111,9 @@ cp -rf $DIR/headphone-acpi-toggle /etc/acpi/events/headphone-acpi-toggle
 mkdir /etc/X11/xorg.conf.d/
 cp -rf $DIR/30-touchpad.conf /etc/X11/xorg.conf.d/
 
+# remove light-locker, as it is broken on this machine. See issue https://github.com/SolidHal/PrawnOS/issues/56#issuecomment-504681175
+apt remove -y light-locker
+
 apt clean && apt autoremove --purge
 
 #enable periodic TRIM

scripts/buildKernel.sh

@@ -39,8 +39,8 @@ cd linux-$KVER
 make clean
 make mrproper
 #Apply the usb and mmc patches if unapplied
-[ "$FRESH" = true ] && for i in $RESOURCES/patches-tested/DTS/*.patch; do patch -p1 < $i; done
+[ "$FRESH" = true ] && for i in $RESOURCES/patches-tested/DTS/*.patch; do echo $i; patch -p1 < $i; done
-[ "$FRESH" = true ] && for i in $RESOURCES/patches-tested/kernel/*.patch; do patch -p1 < $i; done
+[ "$FRESH" = true ] && for i in $RESOURCES/patches-tested/kernel/*.patch; do echo $i; patch -p1 < $i; done
 #Apply all of the rockMyy patches that make sense
 [ "$TEST_PATCHES" = true ] && for i in $RESOURCES/patches-untested/kernel/*.patch; do patch -p1 < $i; done
 [ "$TEST_PATCHES" = true ] && for i in $RESOURCES/patches-untested/DTS/*.patch; do patch -p1 < $i; done