From b8925b7c2f867df6ce3e20deb4b3e2b9b32b20ff Mon Sep 17 00:00:00 2001 From: Matthias Kaehlcke Date: Wed, 5 Jun 2019 13:43:19 -0700 Subject: [PATCH 48/54] ARM: dts: rockchip: Split GPIO keys for veyron into multiple devices With a single device DT overrides can become messy, especially when keys are added or removed. Multiple devices also allow to enable/disable wakeup per key/group. Signed-off-by: Matthias Kaehlcke [used actual switch+event constants in new lid-switch entry] Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi | 27 ++++++++++-------- arch/arm/boot/dts/rk3288-veyron-minnie.dts | 38 +++++++++++++------------ arch/arm/boot/dts/rk3288-veyron-pinky.dts | 2 +- arch/arm/boot/dts/rk3288-veyron.dtsi | 4 +-- 4 files changed, 38 insertions(+), 33 deletions(-) diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi index fbef34578100..5727017f34b2 100644 --- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi @@ -70,6 +70,21 @@ pinctrl-0 = <&ac_present_ap>; }; + lid_switch: lid-switch { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&ap_lid_int_l>; + + lid { + label = "Lid"; + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; + wakeup-source; + linux,code = ; + linux,input-type = ; + debounce-interval = <1>; + }; + }; + panel: panel { compatible ="innolux,n116bge", "simple-panel"; status = "okay"; @@ -149,18 +164,6 @@ status = "okay"; }; -&gpio_keys { - pinctrl-0 = <&pwr_key_l &ap_lid_int_l>; - lid { - label = "Lid"; - gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; - wakeup-source; - linux,code = <0>; /* SW_LID */ - linux,input-type = <5>; /* EV_SW */ - debounce-interval = <1>; - }; -}; - &pwm0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts index a65099b4aef1..b2cc70a08554 100644 --- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts +++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts @@ -48,6 +48,26 @@ regulator-boot-on; vin-supply = <&vcc18_wl>; }; + + volume_buttons: volume-buttons { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&volum_down_l &volum_up_l>; + + volum_down { + label = "Volum_down"; + gpios = <&gpio5 RK_PB3 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <100>; + }; + + volum_up { + label = "Volum_up"; + gpios = <&gpio5 RK_PB2 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <100>; + }; + }; }; &backlight { @@ -90,24 +110,6 @@ pwm-off-delay-ms = <200>; }; -&gpio_keys { - pinctrl-0 = <&pwr_key_l &ap_lid_int_l &volum_down_l &volum_up_l>; - - volum_down { - label = "Volum_down"; - gpios = <&gpio5 RK_PB3 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <100>; - }; - - volum_up { - label = "Volum_up"; - gpios = <&gpio5 RK_PB2 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <100>; - }; -}; - &i2c_tunnel { battery: bq27500@55 { compatible = "ti,bq27500"; diff --git a/arch/arm/boot/dts/rk3288-veyron-pinky.dts b/arch/arm/boot/dts/rk3288-veyron-pinky.dts index 9645be7b3d8c..9b6f4d9b03b6 100644 --- a/arch/arm/boot/dts/rk3288-veyron-pinky.dts +++ b/arch/arm/boot/dts/rk3288-veyron-pinky.dts @@ -35,7 +35,7 @@ force-hpd; }; -&gpio_keys { +&lid_switch { pinctrl-0 = <&pwr_key_h &ap_lid_int_l>; power { diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi index c574844a6bb2..3257ca90f0e8 100644 --- a/arch/arm/boot/dts/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi @@ -23,11 +23,11 @@ reg = <0x0 0x0 0x0 0x80000000>; }; - gpio_keys: gpio-keys { + power_button: power-button { compatible = "gpio-keys"; - pinctrl-names = "default"; pinctrl-0 = <&pwr_key_l>; + power { label = "Power"; gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; -- 2.11.0