From 4db11c378ab1e170c3a197ea3719ffe54cd06637 Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Wed, 19 Jun 2019 11:34:25 -0700 Subject: [PATCH 51/54] ARM: dts: rockchip: Configure BT_DEV_WAKE in on rk3288-veyron This is the other half of the hacky solution from commit f497ab6b4bb8 ("ARM: dts: rockchip: Configure BT_HOST_WAKE as wake-up signal on veyron"). Specifically the LPM driver that the Broadcom Bluetooth expects to have (but is missing in mainline) has two halves of the equation: BT_HOST_WAKE and BT_DEV_WAKE. The BT_HOST_WAKE (which was handled in the previous commit) is the one that lets the Bluetooth wake the system up. The BT_DEV_WAKE (this patch) tells the Bluetooth that it's OK to go into a low power mode. That means we were burning a bit of extra power in S3 without this patch. Measurements are a bit noisy, but it appears to be a few mA worth of difference. NOTE: Though these pins don't do much on systems with Marvell Bluetooth, downstream kernels set it on all veyron boards so we'll do the same. Signed-off-by: Douglas Anderson Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi | 2 ++ arch/arm/boot/dts/rk3288-veyron.dtsi | 20 ++++++++++++++++++++ 2 files changed, 22 insertions(+) diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi index 5727017f34b2..1cadb522fd0d 100644 --- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi @@ -237,6 +237,7 @@ /* Wake only */ &suspend_l_wake + &bt_dev_wake_awake >; pinctrl-1 = < /* Common for sleep and wake, but no owners */ @@ -246,6 +247,7 @@ /* Sleep only */ &suspend_l_sleep + &bt_dev_wake_sleep >; backlight { diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi index e2635ad574e7..53d2f2452868 100644 --- a/arch/arm/boot/dts/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi @@ -485,12 +485,18 @@ &ddr0_retention &ddrio_pwroff &global_pwroff + + /* Wake only */ + &bt_dev_wake_awake >; pinctrl-1 = < /* Common for sleep and wake, but no owners */ &ddr0_retention &ddrio_pwroff &global_pwroff + + /* Sleep only */ + &bt_dev_wake_sleep >; pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { @@ -596,6 +602,20 @@ sdio0_clk: sdio0-clk { rockchip,pins = <4 RK_PD1 1 &pcfg_pull_none_drv_8ma>; }; + + /* + * These pins are only present on very new veyron boards; on + * older boards bt_dev_wake is simply always high. Note that + * gpio4_D2 is a NC on old veyron boards, so it doesn't hurt + * to map this pin everywhere + */ + bt_dev_wake_sleep: bt-dev-wake-sleep { + rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_output_low>; + }; + + bt_dev_wake_awake: bt-dev-wake-awake { + rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_output_high>; + }; }; tpm { -- 2.11.0