PrawnOS-nonfree/resources/BuildResources/patches-tested/DTS/5.x-dts/0020-ARM-dts-rockchip-Add-BT_EN-to-the-power-sequence-for.patch
Hal Emmerich 1cd8ae19a9 Add new workaround patch from ath9k devices
Add backported patched from 5.x from usb related fixes
Up kernel version to most recent lts
2019-08-21 17:31:41 -05:00

51 lines
1.6 KiB
Diff

From 280fa349757bb240c650882feee5a861150ccc2d Mon Sep 17 00:00:00 2001
From: Matthias Kaehlcke <mka@chromium.org>
Date: Tue, 9 Apr 2019 16:14:05 -0700
Subject: [PATCH 20/54] ARM: dts: rockchip: Add BT_EN to the power sequence for
veyron
Add GPIO D5 (BT_ENABLE_L) as reset-GPIO to the power sequence for the
Bluetooth/WiFi module. On devices with a Broadcom module the signal
needs to be asserted to use Bluetooth.
Note that BT_ENABLE_L is a misnomer in the schematics, the signal
actually is active-high.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm/boot/dts/rk3288-veyron.dtsi | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
index fa38eb967f12..efa7b425c9ed 100644
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -62,12 +62,19 @@
pinctrl-0 = <&bt_enable_l>, <&wifi_enable_h>;
/*
- * On the module itself this is one of these (depending
- * on the actual card populated):
+ * Depending on the actual card populated GPIO4 D4 and D5
+ * correspond to one of these signals on the module:
+ *
+ * D4:
* - SDIO_RESET_L_WL_REG_ON
* - PDN (power down when low)
+ *
+ * D5:
+ * - BT_I2S_WS_BT_RFDISABLE_L
+ * - No connect
*/
- reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>,
+ <&gpio4 RK_PD5 GPIO_ACTIVE_LOW>;
};
vcc_5v: vcc-5v {
--
2.11.0