g/PrawnOS-nonfree
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
43b385e5a3
PrawnOS-nonfree/resources/BuildResources/patches-tested/DTS/5.x-dts/0044-ARM-dts-rockchip-Add-pin-names-for-rk3288-veyron-jaq.patch
Hal Emmerich 1cd8ae19a9 Add new workaround patch from ath9k devices 
Add backported patched from 5.x from usb related fixes
Up kernel version to most recent lts
2019-08-21 17:31:41 -05:00

638 lines
11 KiB
Diff
Raw Blame History

From d85b2ad35a2ab320b9c0530992ee532f10a6aeb2 Mon Sep 17 00:00:00 2001
From: Douglas Anderson <dianders@chromium.org>
Date: Fri, 24 May 2019 16:33:09 -0700
Subject: [PATCH 44/54] ARM: dts: rockchip: Add pin names for rk3288-veyron
jaq, mickey, speedy
This is like commit 0ca87bd5baa6 ("ARM: dts: rockchip: Add pin names
for rk3288-veyron-jerry") and commit ca3516b32cd9 ("ARM: dts:
rockchip: Add pin names for rk3288-veyron-minnie") but for 3 more
veyron boards.
A few notes:
- While there is most certainly duplication between all the veyron
boards, it still feels like it is sane to just have each board have
a full list of its pin names. The format of "gpio-line-names" does
not lend itself to one-off overriding and besides it seems sane to
more fully match schematic names. Also note that the extra
duplication here is only in source code and is unlikely to ever
change (since these boards are shipped). Duplication in the .dtb
files is unavoidable.
- veyron-jaq and veyron-mighty are very closely related and so I have
shared a single list for them both with comments on how they are
different. This is just a typo fix on one of the boards, a possible
missing signal on one of the boards (or perhaps I was never given
the most recent schematics?) and dealing with the fact that one of
the two boards has full sized SD.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm/boot/dts/rk3288-veyron-jaq.dts | 207 +++++++++++++++++++++++++++++
arch/arm/boot/dts/rk3288-veyron-mickey.dts | 151 +++++++++++++++++++++
arch/arm/boot/dts/rk3288-veyron-speedy.dts | 207 +++++++++++++++++++++++++++++
3 files changed, 565 insertions(+)
diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
index e248f55ee8d2..fcd119168cb6 100644
--- a/arch/arm/boot/dts/rk3288-veyron-jaq.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
@@ -135,6 +135,213 @@
pinctrl-0 = <&vcc50_hdmi_en>;
};
+&gpio0 {
+ gpio-line-names = "PMIC_SLEEP_AP",
+ "DDRIO_PWROFF",
+ "DDRIO_RETEN",
+ "TS3A227E_INT_L",
+ "PMIC_INT_L",
+ "PWR_KEY_L",
+ "AP_LID_INT_L",
+ "EC_IN_RW",
+
+ "AC_PRESENT_AP",
+ /*
+ * RECOVERY_SW_L is Chrome OS ABI. Schematics call
+ * it REC_MODE_L.
+ */
+ "RECOVERY_SW_L",
+ "OTP_OUT",
+ "HOST1_PWR_EN",
+ "USBOTG_PWREN_H",
+ "AP_WARM_RESET_H",
+ "nFALUT2",
+ "I2C0_SDA_PMIC",
+
+ "I2C0_SCL_PMIC",
+ "SUSPEND_L",
+ "USB_INT";
+};
+
+&gpio2 {
+ gpio-line-names = "CONFIG0",
+ "CONFIG1",
+ "CONFIG2",
+ "",
+ "",
+ "",
+ "",
+ "CONFIG3",
+
+ "",
+ "EMMC_RST_L",
+ "",
+ "",
+ "BL_PWR_EN",
+ "AVDD_1V8_DISP_EN";
+};
+
+&gpio3 {
+ gpio-line-names = "FLASH0_D0",
+ "FLASH0_D1",
+ "FLASH0_D2",
+ "FLASH0_D3",
+ "FLASH0_D4",
+ "FLASH0_D5",
+ "FLASH0_D6",
+ "FLASH0_D7",
+
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+
+ "FLASH0_CS2/EMMC_CMD",
+ "",
+ "FLASH0_DQS/EMMC_CLKO";
+};
+
+&gpio4 {
+ gpio-line-names = "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+
+ "UART0_RXD",
+ "UART0_TXD",
+ "UART0_CTS",
+ "UART0_RTS",
+ "SDIO0_D0",
+ "SDIO0_D1",
+ "SDIO0_D2",
+ "SDIO0_D3",
+
+ "SDIO0_CMD",
+ "SDIO0_CLK",
+ "BT_DEV_WAKE", /* Maybe missing from mighty? */
+ "",
+ "WIFI_ENABLE_H",
+ "BT_ENABLE_L",
+ "WIFI_HOST_WAKE",
+ "BT_HOST_WAKE";
+};
+
+&gpio5 {
+ gpio-line-names = "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+
+ "",
+ "",
+ "",
+ "",
+ "SPI0_CLK",
+ "SPI0_CS0",
+ "SPI0_TXD",
+ "SPI0_RXD",
+
+ "",
+ "",
+ "",
+ "VCC50_HDMI_EN";
+};
+
+&gpio6 {
+ gpio-line-names = "I2S0_SCLK",
+ "I2S0_LRCK_RX",
+ "I2S0_LRCK_TX",
+ "I2S0_SDI",
+ "I2S0_SDO0",
+ "HP_DET_H",
+ "ALS_INT",
+ "INT_CODEC",
+
+ "I2S0_CLK",
+ "I2C2_SDA",
+ "I2C2_SCL",
+ "MICDET",
+ "",
+ "",
+ "",
+ "",
+
+ "SDMMC_D0",
+ "SDMMC_D1",
+ "SDMMC_D2",
+ "SDMMC_D3",
+ "SDMMC_CLK",
+ "SDMMC_CMD";
+};
+
+&gpio7 {
+ gpio-line-names = "LCDC_BL",
+ "PWM_LOG",
+ "BL_EN",
+ "TRACKPAD_INT",
+ "TPM_INT_H",
+ "SDMMC_DET_L",
+ /*
+ * AP_FLASH_WP_L is Chrome OS ABI. Schematics call
+ * it FW_WP_AP.
+ */
+ "AP_FLASH_WP_L",
+ "EC_INT",
+
+ "CPU_NMI",
+ "DVSOK",
+ "SDMMC_WP", /* mighty only */
+ "EDP_HPD",
+ "DVS1",
+ "nFALUT1", /* nFAULT1 on jaq */
+ "LCD_EN",
+ "DVS2",
+
+ "VCC5V_GOOD_H",
+ "I2C4_SDA_TP",
+ "I2C4_SCL_TP",
+ "I2C5_SDA_HDMI",
+ "I2C5_SCL_HDMI",
+ "5V_DRV",
+ "UART2_RXD",
+ "UART2_TXD";
+};
+
+&gpio8 {
+ gpio-line-names = "RAM_ID0",
+ "RAM_ID1",
+ "RAM_ID2",
+ "RAM_ID3",
+ "I2C1_SDA_TPM",
+ "I2C1_SCL_TPM",
+ "SPI2_CLK",
+ "SPI2_CS0",
+
+ "SPI2_RXD",
+ "SPI2_TXD";
+};
+
&pinctrl {
backlight {
bl_pwr_en: bl_pwr_en {
diff --git a/arch/arm/boot/dts/rk3288-veyron-mickey.dts b/arch/arm/boot/dts/rk3288-veyron-mickey.dts
index 945e80801292..aa352d40c991 100644
--- a/arch/arm/boot/dts/rk3288-veyron-mickey.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-mickey.dts
@@ -252,6 +252,157 @@
};
};
+&gpio0 {
+ gpio-line-names = "PMIC_SLEEP_AP",
+ "",
+ "",
+ "",
+ "PMIC_INT_L",
+ "POWER_BUTTON_L",
+ "",
+ "",
+
+ "",
+ /*
+ * RECOVERY_SW_L is Chrome OS ABI. Schematics call
+ * it REC_MODE_L.
+ */
+ "RECOVERY_SW_L",
+ "OT_RESET",
+ "",
+ "",
+ "AP_WARM_RESET_H",
+ "",
+ "I2C0_SDA_PMIC",
+
+ "I2C0_SCL_PMIC",
+ "",
+ "nFALUT";
+};
+
+&gpio2 {
+ gpio-line-names = "CONFIG0",
+ "CONFIG1",
+ "CONFIG2",
+ "",
+ "",
+ "",
+ "",
+ "CONFIG3",
+
+ "",
+ "EMMC_RST_L";
+};
+
+&gpio3 {
+ gpio-line-names = "FLASH0_D0",
+ "FLASH0_D1",
+ "FLASH0_D2",
+ "FLASH0_D3",
+ "FLASH0_D4",
+ "FLASH0_D5",
+ "FLASH0_D6",
+ "FLASH0_D7",
+
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+
+ "FLASH0_CS2/EMMC_CMD",
+ "",
+ "FLASH0_DQS/EMMC_CLKO";
+};
+
+&gpio4 {
+ gpio-line-names = "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+
+ "UART0_RXD",
+ "UART0_TXD",
+ "UART0_CTS_L",
+ "UART0_RTS_L",
+ "SDIO0_D0",
+ "SDIO0_D1",
+ "SDIO0_D2",
+ "SDIO0_D3",
+
+ "SDIO0_CMD",
+ "SDIO0_CLK",
+ "BT_DEV_WAKE",
+ "",
+ "WIFI_ENABLE_H",
+ "BT_ENABLE_L",
+ "WIFI_HOST_WAKE",
+ "BT_HOST_WAKE";
+};
+
+&gpio7 {
+ gpio-line-names = "",
+ "PWM_LOG",
+ "",
+ "",
+ "TPM_INT_H",
+ "SDMMC_DET_L",
+ /*
+ * AP_FLASH_WP_L is Chrome OS ABI. Schematics call
+ * it FW_WP_AP.
+ */
+ "AP_FLASH_WP_L",
+ "",
+
+ "CPU_NMI",
+ "DVSOK",
+ "HDMI_WAKE",
+ "POWER_HDMI_ON",
+ "DVS1",
+ "",
+ "",
+ "DVS2",
+
+ "HDMI_CEC",
+ "",
+ "",
+ "I2C5_SDA_HDMI",
+ "I2C5_SCL_HDMI",
+ "",
+ "UART2_RXD",
+ "UART2_TXD";
+};
+
+&gpio8 {
+ gpio-line-names = "RAM_ID0",
+ "RAM_ID1",
+ "RAM_ID2",
+ "RAM_ID3",
+ "I2C1_SDA_TPM",
+ "I2C1_SCL_TPM",
+ "SPI2_CLK",
+ "SPI2_CS0",
+
+ "SPI2_RXD",
+ "SPI2_TXD";
+};
+
&pinctrl {
hdmi {
power_hdmi_on: power-hdmi-on {
diff --git a/arch/arm/boot/dts/rk3288-veyron-speedy.dts b/arch/arm/boot/dts/rk3288-veyron-speedy.dts
index 9a87017347ea..9b140db04456 100644
--- a/arch/arm/boot/dts/rk3288-veyron-speedy.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-speedy.dts
@@ -113,6 +113,213 @@
pinctrl-0 = <&vcc50_hdmi_en>;
};
+&gpio0 {
+ gpio-line-names = "PMIC_SLEEP_AP",
+ "DDRIO_PWROFF",
+ "DDRIO_RETEN",
+ "TS3A227E_INT_L",
+ "PMIC_INT_L",
+ "PWR_KEY_L",
+ "AP_LID_INT_L",
+ "EC_IN_RW",
+
+ "AC_PRESENT_AP",
+ /*
+ * RECOVERY_SW_L is Chrome OS ABI. Schematics call
+ * it REC_MODE_L.
+ */
+ "RECOVERY_SW_L",
+ "OTP_OUT",
+ "HOST1_PWR_EN",
+ "USBOTG_PWREN_H",
+ "AP_WARM_RESET_H",
+ "nFALUT2",
+ "I2C0_SDA_PMIC",
+
+ "I2C0_SCL_PMIC",
+ "SUSPEND_L",
+ "USB_INT";
+};
+
+&gpio2 {
+ gpio-line-names = "CONFIG0",
+ "CONFIG1",
+ "CONFIG2",
+ "",
+ "",
+ "",
+ "",
+ "CONFIG3",
+
+ "PWRLIMIT#_CPU",
+ "EMMC_RST_L",
+ "",
+ "",
+ "BL_PWR_EN",
+ "AVDD_1V8_DISP_EN";
+};
+
+&gpio3 {
+ gpio-line-names = "FLASH0_D0",
+ "FLASH0_D1",
+ "FLASH0_D2",
+ "FLASH0_D3",
+ "FLASH0_D4",
+ "FLASH0_D5",
+ "FLASH0_D6",
+ "FLASH0_D7",
+
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+
+ "FLASH0_CS2/EMMC_CMD",
+ "",
+ "FLASH0_DQS/EMMC_CLKO";
+};
+
+&gpio4 {
+ gpio-line-names = "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+
+ "UART0_RXD",
+ "UART0_TXD",
+ "UART0_CTS",
+ "UART0_RTS",
+ "SDIO0_D0",
+ "SDIO0_D1",
+ "SDIO0_D2",
+ "SDIO0_D3",
+
+ "SDIO0_CMD",
+ "SDIO0_CLK",
+ "BT_DEV_WAKE",
+ "",
+ "WIFI_ENABLE_H",
+ "BT_ENABLE_L",
+ "WIFI_HOST_WAKE",
+ "BT_HOST_WAKE";
+};
+
+&gpio5 {
+ gpio-line-names = "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+
+ "",
+ "",
+ "",
+ "",
+ "SPI0_CLK",
+ "SPI0_CS0",
+ "SPI0_TXD",
+ "SPI0_RXD",
+
+ "",
+ "",
+ "",
+ "VCC50_HDMI_EN";
+};
+
+&gpio6 {
+ gpio-line-names = "I2S0_SCLK",
+ "I2S0_LRCK_RX",
+ "I2S0_LRCK_TX",
+ "I2S0_SDI",
+ "I2S0_SDO0",
+ "HP_DET_H",
+ "ALS_INT", /* not connected */
+ "INT_CODEC",
+
+ "I2S0_CLK",
+ "I2C2_SDA",
+ "I2C2_SCL",
+ "MICDET",
+ "",
+ "",
+ "",
+ "",
+
+ "SDMMC_D0",
+ "SDMMC_D1",
+ "SDMMC_D2",
+ "SDMMC_D3",
+ "SDMMC_CLK",
+ "SDMMC_CMD";
+};
+
+&gpio7 {
+ gpio-line-names = "LCDC_BL",
+ "PWM_LOG",
+ "BL_EN",
+ "TRACKPAD_INT",
+ "TPM_INT_H",
+ "SDMMC_DET_L",
+ /*
+ * AP_FLASH_WP_L is Chrome OS ABI. Schematics call
+ * it FW_WP_AP.
+ */
+ "AP_FLASH_WP_L",
+ "EC_INT",
+
+ "CPU_NMI",
+ "DVS_OK",
+ "",
+ "EDP_HOTPLUG",
+ "DVS1",
+ "nFALUT1",
+ "LCD_EN",
+ "DVS2",
+
+ "VCC5V_GOOD_H",
+ "I2C4_SDA_TP",
+ "I2C4_SCL_TP",
+ "I2C5_SDA_HDMI",
+ "I2C5_SCL_HDMI",
+ "5V_DRV",
+ "UART2_RXD",
+ "UART2_TXD";
+};
+
+&gpio8 {
+ gpio-line-names = "RAM_ID0",
+ "RAM_ID1",
+ "RAM_ID2",
+ "RAM_ID3",
+ "I2C1_SDA_TPM",
+ "I2C1_SCL_TPM",
+ "SPI2_CLK",
+ "SPI2_CS0",
+
+ "SPI2_RXD",
+ "SPI2_TXD";
+};
+
&pinctrl {
backlight {
bl_pwr_en: bl_pwr_en {
--
2.11.0
Reference in New Issue View Git Blame Copy Permalink