"PROTIMS" = "遠程下載"  
"1.New Load" = "1.新的下載"
"2.Repeat Load" = "2.重新下載" 
"3.Resume Load" = "3.繼續下載" 
"Outside Num" = "外線號碼" 
"Phone Num" = "電話號碼" 
"Init..." = "初始化..."
"Baud Rate" = "波特率" 
"Terminal ID" = "終端號" 
"User Name" = "用戶名"
"Password" = "密碼"
"Remote IP" = "服務器IP"
"Remote Port" = "服務器端口"
"Local IP" = "本地IP" 
"Netmask" = "子網掩碼"
"Gateway" = "網關" 
"Handshake Err" = "握手失敗"
"Handshake Start..." = "握手開始..." 
"Tcp Connect ..." = "TCP連接..."
"APN" = "接入點名稱"
"PIN Code" = "PIN碼" 
"YES" = "是"
"NO" = "否"
"Comm Init Err" = "通訊初始化失敗"
"Dev is busy" = "設備被佔用"
"Dialing ..." = "正在撥號..."
"WL Net Init..." = "無線初始化" 
"DNS Resolve Err" = "DNS解析錯誤"
"PORT_OPEN_ERR" = "端口打開錯誤"
"PPP Logging..." = "PPP登錄..."
"DNS Resolve" = "DNS解析"
"Not Configured!" = "没有配置!"
"Get Task Err" = "獲取任務失敗"
"Task Parse Err" = "任務解析錯誤"
"No Task List" = "沒有任務列表"
"Readlog failed" = "讀日誌失敗"
"Deletelog failed" = "刪除日誌失敗"
"Writelog failed" = "寫日誌失敗"
"No enough space" = "沒有足夠的空間"
"Download Timeout" = "下載超時"
"Download failed" = "下載失敗"
"Download Succ!!" = "下載成功!!"
"Para Err" = "參數錯誤"
"ProTims TID Err" = "任務號錯誤"
"Update Failed" = "更新失敗"
"No Response" = "没有響應"
"Line Busy" = "線路忙"
"No Phone Line" = "没有電話線"
"SendBuff not empty" = "發送緩衝區未空"
"Set Route Fail" = "設置路由失敗"
"DHCP Fail" = "DHCP失敗"
"Enable DHCP" = "是否DHCP"
"Create Soc Err" = "創建套接字錯誤"
"Dns Reslove Err" = "域名解析失敗"
"Tcp Connect Err" = "TCP連接失敗"
"Tcp Recv Err" = "TCP接收錯誤"
"Recv Len Err" = "接收長度錯誤"
"WL Init Err" = "無線初始化錯誤"
"WL Login Err" = "無線登陸錯誤"
"PPP opening..." = "PPP打開..."
"PPP Login Err" = "PPP登陸錯誤"
"PPP Check Err" = "PPP檢查錯誤"
"PPP Socket Err" = "PPP套接字錯誤"
"PPP Dns Rsl Err" = "PPP域名解析錯誤"
"PPP Conn Err" = "PPP連接錯誤"
"User Cancel" = "用戶取消"
"Comm Timeout" = "通訊超時"
"Recv Err Data" = "接收到錯誤數據"
"Comm verify Err" = "通訊驗證錯誤"
"Comm data Err" = "通訊數據錯誤"
"Server data Err" = "服務器數據錯誤"
"Vern is low" = "版本太低"
"Verify Err" = "認證錯誤"
"Wifi Open failed!\n" = "Wifi打開失敗!\n"
"Wifi Open Succ!\n" = "Wifi打開成功!\n"
"Wifi Scan Err!\n" = "Wifi掃描錯誤"
"No Update!" = "没有更新"
"Pls Reboot!" = "请重新啟動"
"DOWNLOAD  " = "下載 "
"Building File Sys" = "建立文件系統"
"Del All App" = "刪除所有應用"
"Del App" = "删除應用"
"Update DLL" = "更新動態庫"
"UPDATE_DLL_FAILED" = "更新動態庫失敗"
"Update USPUK" = "更新USPUK"
"Update AIP" = "更新應用"
"Update AUP" = "更新增量包"
"Update Para" = "更新參數"
"Update OS" = "更新系統"
"Download 100%%" = "下載完成"
"Authenticate..." = "認證..."
"Get Tasks..." = "獲取任務..."
"Parse Tasks..." = "解析任務..."
"AIP%12dK" = "應用%12dK"
"Para" = "參數"
"Cur File   %c  %3d%%" = "當前文件   %c  %3d%%"
"Para%12dK" = "參數%12dK"
"AUP%12dK" = "增量包%12dK"
"OS%12dK" = "系統包%12dK"
"PPP Connecting..." = "PPP 連接..."
"Download 99%%" = "下載 99%%"
"Term Auth Err" = "終端認證失敗"
"Font%12dK" = "字體%12dK"
"SELECT SSID" = "選擇熱點"
"Update Later" = "稍後更新"
"Update Succ!!" = "更新成功!!"
"DOWNLOAD  %3d%% " = "下載    %3d%% "
"Update App Er" = "更新應用失敗"
"Update Para Err" = "更新參數失敗"
"Update Del Err" = "更新刪除失敗"
"Update PUK Err" = "更新PUK失敗"
"Update OS Err" = "更新系統失敗"