#For S920_M01_P03_SAM_WCDMA_MU509 on early-init insmod /startup/modules/bcm5892-rtc.ko start ueventd on init insmod /startup/modules/devices_base.ko insmod /startup/modules/S920_M03_P03_SAM_WCDMA_MU509.ko insmod /startup/modules/ioconfig.ko write /sys/class/backlight/pwm-backlight/brightness 100 insmod /startup/modules/pm_bcm5892.ko setprop ro.security_version 14.00.04 #USB support insmod /startup/modules/bcm589x-dwccom.ko insmod /startup/modules/bcm589x-otg.ko insmod /startup/modules/tty-devices.ko insmod /startup/modules/tty-host.ko insmod /startup/modules/bcm589x-usb-host.ko #base drivers # battery, must before than power on gprs insmod /startup/modules/bm_mp2625gl.ko insmod /startup/modules/pmu_dummy.ko insmod /startup/modules/misc.ko insmod /startup/modules/input_base.ko power_key=223 press_time=2 insmod /startup/modules/keypad_matrix.ko #power on gprs if property:ro.fac.radio!= write /sys/devices/platform/misc/gprs/cmd 0 #card drivers (sci msr pcd) insmod /startup/modules/sci_bcm5892_ncn8025.ko insmod /startup/modules/msr.ko insmod /startup/modules/pcd_base.ko insmod /startup/modules/pcd_as3911.ko #security drivers (bbl, sec, verify) insmod /startup/modules/bcm5892_bbl.ko insmod /startup/modules/bcm589x-sec.ko insmod /startup/modules/verify.ko #sound driver if property:ro.fac.audiocard=CS4344-CZZR insmod /startup/modules/bcm589x_i2s.ko if property:ro.fac.audiocard=BCM589X_DAC insmod /startup/modules/bcm589x_dac.ko #touchscreen driver write /sys/devices/:amba:i2c1/enabled 1 insmod /startup/modules/synaptics_dsx.ko #log server driver insmod /startup/modules/logger.ko #switch wifi power.NOTE othis position must before the WIFI driver and after the PUM driver! # write /sys/devices/platform/misc/wifi/power 1 #wifi if property:ro.fac.wifi=03 insmod /startup/modules/bcmdhd.ko firmware_path=/startup/firmware/bcm_ap6181/fw_bcm40181a2.bin nvram_path=/startup/firmware/bcm_ap6181/nvram_ap6181.txt iface_name=wlan0 config_path=/startup/firmware/bcm_ap6181/config.txt PAX_INT_GPIO=28 if property:ro.fac.wifi=04 insmod /startup/modules/bcmdhd.ko firmware_path=/startup/firmware/bcm_ap6181/fw_bcm43438a0.bin nvram_path=/startup/firmware/bcm_ap6181/nvram_ap6212.txt iface_name=wlan0 config_path=/startup/firmware/bcm_ap6181/config.txt PAX_INT_GPIO=28 #printer driver if property:ro.fac.printer=PT48D-HLV insmod /startup/modules/pt48d-hlv.ko if property:ro.fac.printer=02 insmod /startup/modules/pt48d-hlv.ko chmod 666 /sys/power/state chmod 666 /sys/class/backlight/pwm-backlight/brightness chmod 666 /sys/devices/platform/keypad/backlight_on chmod 666 /sys/devices/platform/keypad/buzzer_user_duration chown root hwdev /sys/devices/platform/keypad/buzzer_user_duration chmod 666 /sys/devices/platform/keypad/buzzer_user_freq chown root hwdev /sys/devices/platform/keypad/buzzer_user_freq chmod 222 /sys/devices/platform/keypad/buzzer_user_trigger chown root hwdev /sys/devices/platform/keypad/buzzer_user_trigger chmod 666 /sys/devices/platform/keypad/buzzer_user_volume chown root hwdev /sys/devices/platform/keypad/buzzer_user_volume chmod 222 /sys/devices/platform/keypad/buzzer_user_stop chown root hwdev /sys/devices/platform/keypad/buzzer_user_stop chmod 660 /sys/devices/platform/keypad/buzzer_keypad_duration chown root MAINAPP /sys/devices/platform/keypad/buzzer_keypad_duration chmod 660 /sys/devices/platform/keypad/buzzer_keypad_freq chown root MAINAPP /sys/devices/platform/keypad/buzzer_keypad_freq chmod 666 /sys/devices/platform/keypad/buzzer_keypad_enable chown root MAINAPP /sys/devices/platform/keypad/buzzer_keypad_enable chmod 660 /sys/devices/platform/keypad/buzzer_keypad_volume chown root MAINAPP /sys/devices/platform/keypad/buzzer_keypad_volume #time of back light auto active, unit:Second setprop persist.sys.backlighttime 60 setprop persist.sys.sleeptime 0 setprop persist.sys.sleepwaittime 1 # usb ethernet driver insmod /startup/modules/asix.ko # create some symlinks if property:ro.fac.radio!= symlink /dev/ttyAMA1 /dev/ttywl if property:ro.fac.bt!= symlink /dev/ttyAMA3 /dev/ttybt symlink /dev/input/event0 /dev/keypad symlink /dev/input/event1 /dev/keypad_ped symlink /dev/input/event2 /dev/tp symlink /dev/input/event3 /dev/tp_ped symlink /dev/graphics/fb0 /dev/fb symlink /dev/graphics/fb1 /dev/fb_ped on post-fs #LCD driver symlink /startup/firmware/lcd_240x320_r90.rle /startup/firmware/lcd.watermark write /sys/class/backlight/pwm-backlight/brightness 0 insmod /startup/modules/lcd_fb.ko insmod /startup/modules/lcd_hw_ctrl.ko if property:ro.fac.videocard=TM035KBH08-36 insmod /startup/modules/lcd_panel_TM035KBH08_36.ko if property:ro.fac.videocard=08 insmod /startup/modules/lcd_panel_TM035KBH08_36.ko if property:ro.fac.videocard=11 insmod /startup/modules/lcd_panel_H35C65_00E.ko if property:ro.fac.videocard=12 insmod /startup/modules/lcd_panel_H35C128_01N.ko if property:ro.fac.videocard=15 insmod /startup/modules/lcd_panel_H35C128_01N.ko if property:ro.fac.videocard=20 insmod /startup/modules/lcd_panel_H35C128_01N.ko on early-boot chmod 755 /usr/bin/wpa_supplicant_ap6181 on boot if property:ro.fac.wifi!= start wpa_supplicant service servicemanager /usr/bin/servicemanager class core user root group root critical onrestart restart systemservice onrestart restart ipservice service wpa_supplicant /usr/bin/logwrapper /usr/bin/wpa_supplicant_ap6181 -Dnl80211 -iwlan0 -c /startup/wpa_supplicant_ap6181.conf disabled user root group root service usbwifi /usr/bin/wpa_supplicant_ap6181 -Dwext -iwlan0 -c /startup/wifi_settings.cfg disabled user root group root service ipservice /usr/bin/ipservice disabled user root group root service pedd /usr/bin/pedd user root group root service modemd /usr/bin/modemd disabled user root group root service keyman /usr/bin/keyman disabled user root group root service xcb /usr/bin/xcbd disabled user MAINAPP group MAINAPP service crashd /usr/bin/crashd user MAINAPP group MAINAPP service systemservice /usr/bin/systemservice user root group root on property:persist.sys.ipservice.enable=1 start ipservice on property:persist.sys.ipservice.enable=0 stop ipservice on property:persist.sys.modemd.enable=1 start modemd on property:persist.sys.modemd.enable=0 stop modemd on property:persist.sys.xcb.enable=1 start xcb on property:persist.sys.xcb.enable=0 stop xcb