on early-init insmod /startup/modules/bcm5892-rtc.ko start ueventd on init insmod /startup/modules/devices_base.ko insmod /startup/modules/pm_bcm5892.ko insmod /startup/modules/D200_M40_P21_GPRS.ko insmod /startup/modules/ioconfig.ko write /sys/class/backlight/pwm-backlight/brightness 255 setprop ro.security_version 13.03.00 #USB support insmod /startup/modules/bcm589x-dwccom.ko insmod /startup/modules/bcm589x-otg.ko insmod /startup/modules/tty-devices.ko insmod /startup/modules/tty-host.ko #base drivers insmod /startup/modules/misc.ko #AP6212 PWR ON write /sys/devices/platform/misc/wifi/cmd 0 #enable i2c1 adapter for pmu write /sys/devices/:amba:i2c1/enabled 1 insmod /startup/modules/pmu_rn5t614x.ko #AP6212 REG ON write /sys/devices/platform/misc/wifi/cmd 1 #i2c-GPIO driver for touch key insmod /startup/modules/i2c-gpio.ko insmod /startup/modules/input_base.ko power_key=116 press_time=2 #touch_key driver insmod /startup/modules/touch_key_cy8c20436a.ko #power on gprs,must after the pmu driver if property:ro.fac.radio!= write /sys/devices/platform/misc/gprs/cmd 0 #card drivers (sci msr pcd) insmod /startup/modules/sci_bcm5892_ncn8025.ko insmod /startup/modules/msr.ko insmod /startup/modules/pcd_base.ko insmod /startup/modules/pcd_rc663.ko #security drivers (bbl, sec, verify) insmod /startup/modules/bcm5892_bbl.ko insmod /startup/modules/bcm589x-sec.ko insmod /startup/modules/verify.ko # bluetooth MFI for apple if property:ro.fac.bt=WLT2564 insmod /startup/modules/mfi_encrypt.ko if property:ro.fac.bt=01 insmod /startup/modules/mfi_encrypt.ko #touchscreen driver insmod /startup/modules/ads7846.ko #log server driver insmod /startup/modules/logger.ko chmod 666 /sys/power/state chmod 666 /sys/class/backlight/pwm-backlight/brightness chmod 666 /sys/devices/platform/keypad/backlight_on chmod 666 /sys/devices/platform/keypad/buzzer_user_duration chown root hwdev /sys/devices/platform/keypad/buzzer_user_duration chmod 666 /sys/devices/platform/keypad/buzzer_user_freq chown root hwdev /sys/devices/platform/keypad/buzzer_user_freq chmod 222 /sys/devices/platform/keypad/buzzer_user_trigger chown root hwdev /sys/devices/platform/keypad/buzzer_user_trigger chmod 666 /sys/devices/platform/keypad/buzzer_user_volume chown root hwdev /sys/devices/platform/keypad/buzzer_user_volume chmod 222 /sys/devices/platform/keypad/buzzer_user_stop chown root hwdev /sys/devices/platform/keypad/buzzer_user_stop chmod 660 /sys/devices/platform/keypad/buzzer_keypad_duration chown root MAINAPP /sys/devices/platform/keypad/buzzer_keypad_duration chmod 660 /sys/devices/platform/keypad/buzzer_keypad_freq chown root MAINAPP /sys/devices/platform/keypad/buzzer_keypad_freq chmod 666 /sys/devices/platform/keypad/buzzer_keypad_enable chown root MAINAPP /sys/devices/platform/keypad/buzzer_keypad_enable chmod 660 /sys/devices/platform/keypad/buzzer_keypad_volume chown root MAINAPP /sys/devices/platform/keypad/buzzer_keypad_volume #key_value of back_light setprop ro.backlightkey 116 #time of back light auto active, unit:Second setprop persist.sys.backlighttime 60 setprop persist.sys.sleeptime 0 setprop persist.sys.sleepwaittime 1 # usb ethernet driver insmod /startup/modules/asix.ko # create some symlinks if property:ro.fac.bt!= symlink /dev/ttyAMA1 /dev/ttybt if property:ro.fac.radio!= symlink /dev/ttyAMA3 /dev/ttywl symlink /dev/input/event0 /dev/keypad symlink /dev/input/event1 /dev/keypad_ped symlink /dev/input/event2 /dev/tp symlink /dev/input/event3 /dev/tp_ped symlink /dev/graphics/fb0 /dev/fb symlink /dev/graphics/fb1 /dev/fb_ped on fs export TSLIB_CONSOLEDEVICE none export TSLIB_FBDEVICE /dev/fb export TSLIB_TSDEVICE /dev/tp export TSLIB_CALIBFILE /etc/ts/pointercal export TSLIB_CONFFILE /etc/ts/ts.conf export TSLIB_PLUGINDIR /usr/lib/ts on post-fs #LCD driver symlink /startup/firmware/lcd_320x240.rle /startup/firmware/lcd.watermark write /sys/class/backlight/pwm-backlight/brightness 0 insmod /startup/modules/lcd_fb.ko insmod /startup/modules/lcd_hw_smc.ko if property:ro.fac.videocard=TM023KDZ32 insmod /startup/modules/lcd_panel_TM023KDZ32.ko if property:ro.fac.videocard=LCD_01 insmod /startup/modules/lcd_panel_LCD_01.ko if property:ro.fac.videocard=01 insmod /startup/modules/lcd_panel_LCD_01.ko on early-boot chmod 755 /usr/bin/wpa_supplicant_ap6181 #wifi wait /sys/class/mmc_host/mmc0/mmc0:0001 if property:ro.fac.wifi=03 insmod /startup/modules/bcmdhd.ko firmware_path=/startup/firmware/bcm_ap6181/fw_bcm40181a2.bin nvram_path=/startup/firmware/bcm_ap6181/nvram_ap6181.txt iface_name=wlan0 config_path=/startup/firmware/bcm_ap6181/config.txt PAX_INT_GPIO=42 if property:ro.fac.wifi=04 insmod /startup/modules/bcmdhd.ko firmware_path=/startup/firmware/bcm_ap6181/fw_bcm43438a0.bin nvram_path=/startup/firmware/bcm_ap6181/nvram_ap6212.txt iface_name=wlan0 config_path=/startup/firmware/bcm_ap6181/config.txt PAX_INT_GPIO=42 on boot if property:ro.fac.wifi!= start wpa_supplicant service servicemanager /usr/bin/servicemanager class core user root group root critical onrestart restart systemservice onrestart restart ipservice service wpa_supplicant /usr/bin/logwrapper /usr/bin/wpa_supplicant_ap6181 -Dnl80211 -iwlan0 -c /startup/wpa_supplicant_ap6181.conf disabled user root group root service usbwifi /usr/bin/wpa_supplicant_ap6181 -Dwext -iwlan0 -c /startup/wifi_settings.cfg disabled user root group root service bsa_server /data/opt/bin/bsa_server -lpm -d /dev/ttybt -p const -u /tmp/ -k /data/var/bluetooth/ap6212_ble_local_keys disabled user root group root service ipservice /usr/bin/ipservice disabled user root group root service pedd /usr/bin/pedd user root group root service keyman /usr/bin/keyman disabled user root group root service xcb /usr/bin/xcbd disabled user MAINAPP group MAINAPP service crashd /usr/bin/crashd user MAINAPP group MAINAPP service systemservice /usr/bin/systemservice user root group root on property:persist.sys.ipservice.enable=1 start ipservice on property:persist.sys.ipservice.enable=0 stop ipservice on property:persist.sys.xcb.enable=1 start xcb on property:persist.sys.xcb.enable=0 stop xcb on property:rt.app.bsa_server.enable=1 start bsa_server on property:rt.app.bsa_server.enable=0 stop bsa_server