prolin-xcb-client/adb/adb_protocol.py

# Copyright 2014 Google Inc. All rights reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
"""ADB protocol implementation.

Implements the ADB protocol as seen in android's adb/adbd binaries, but only the
host side.
"""

import struct
import time
from io import BytesIO
from adb import usb_exceptions

# Maximum amount of data in an ADB packet.
MAX_ADB_DATA = 4096
# ADB protocol version.
VERSION = 0x01000000

# AUTH constants for arg0.
AUTH_TOKEN = 1
AUTH_SIGNATURE = 2
AUTH_RSAPUBLICKEY = 3


def find_backspace_runs(stdout_bytes, start_pos):
    first_backspace_pos = stdout_bytes[start_pos:].find(b'\x08')
    if first_backspace_pos == -1:
        return -1, 0

    end_backspace_pos = (start_pos + first_backspace_pos) + 1
    while True:
        if chr(stdout_bytes[end_backspace_pos]) == '\b':
            end_backspace_pos += 1
        else:
            break

    num_backspaces = end_backspace_pos - (start_pos + first_backspace_pos)

    return (start_pos + first_backspace_pos), num_backspaces


class InvalidCommandError(Exception):
    """Got an invalid command over USB."""

    def __init__(self, message, response_header, response_data):
        if response_header == b'FAIL':
            message = 'Command failed, device said so. (%s)' % message
        super(InvalidCommandError, self).__init__(
            message, response_header, response_data)


class InvalidResponseError(Exception):
    """Got an invalid response to our command."""


class InvalidChecksumError(Exception):
    """Checksum of data didn't match expected checksum."""


class InterleavedDataError(Exception):
    """We only support command sent serially."""


def MakeWireIDs(ids):
    id_to_wire = {
        cmd_id: sum(c << (i * 8) for i, c in enumerate(bytearray(cmd_id)))
        for cmd_id in ids
    }
    wire_to_id = {wire: cmd_id for cmd_id, wire in id_to_wire.items()}
    return id_to_wire, wire_to_id


class AuthSigner(object):
    """Signer for use with authenticated ADB, introduced in 4.4.x/KitKat."""

    def Sign(self, data):
        """Signs given data using a private key."""
        raise NotImplementedError()

    def GetPublicKey(self):
        """Returns the public key in PEM format without headers or newlines."""
        raise NotImplementedError()


class _AdbConnection(object):
    """ADB Connection."""

    def __init__(self, usb, local_id, remote_id, timeout_ms):
        self.usb = usb
        self.local_id = local_id
        self.remote_id = remote_id
        self.timeout_ms = timeout_ms

    def _Send(self, command, arg0, arg1, data=b''):
        message = AdbMessage(command, arg0, arg1, data)
        message.Send(self.usb, self.timeout_ms)

    def Write(self, data):
        """Write a packet and expect an Ack."""
        self._Send(b'WRTE', arg0=self.local_id, arg1=self.remote_id, data=data)
        # Expect an ack in response.
        cmd, okay_data = self.ReadUntil(b'OKAY')
        if cmd != b'OKAY':
            if cmd == b'FAIL':
                raise usb_exceptions.AdbCommandFailureException(
                    'Command failed.', okay_data)
            raise InvalidCommandError(
                'Expected an OKAY in response to a WRITE, got %s (%s)',
                cmd, okay_data)
        return len(data)

    def Okay(self):
        self._Send(b'OKAY', arg0=self.local_id, arg1=self.remote_id)

    def ReadUntil(self, *expected_cmds):
        """Read a packet, Ack any write packets."""
        cmd, remote_id, local_id, data = AdbMessage.Read(
            self.usb, expected_cmds, self.timeout_ms)
        if local_id != 0 and self.local_id != local_id:
            raise InterleavedDataError("We don't support multiple streams...")
        if remote_id != 0 and self.remote_id != remote_id:
            raise InvalidResponseError(
                'Incorrect remote id, expected %s got %s' % (
                    self.remote_id, remote_id))
        # Ack write packets.
        if cmd == b'WRTE':
            self.Okay()
        return cmd, data

    def ReadUntilClose(self):
        """Yield packets until a Close packet is received."""
        while True:
            cmd, data = self.ReadUntil(b'CLSE', b'WRTE')
            if cmd == b'CLSE':
                self._Send(b'CLSE', arg0=self.local_id, arg1=self.remote_id)
                break
            if cmd != b'WRTE':
                if cmd == b'FAIL':
                    raise usb_exceptions.AdbCommandFailureException(
                        'Command failed.', data)
                raise InvalidCommandError('Expected a WRITE or a CLOSE, got %s (%s)',
                                          cmd, data)
            yield data

    def Close(self):
        self._Send(b'CLSE', arg0=self.local_id, arg1=self.remote_id)
        cmd, data = self.ReadUntil(b'CLSE')
        if cmd != b'CLSE':
            if cmd == b'FAIL':
                raise usb_exceptions.AdbCommandFailureException('Command failed.', data)
            raise InvalidCommandError('Expected a CLSE response, got %s (%s)',
                                      cmd, data)


class AdbMessage(object):
    """ADB Protocol and message class.

    Protocol Notes

    local_id/remote_id:
      Turns out the documentation is host/device ambidextrous, so local_id is the
      id for 'the sender' and remote_id is for 'the recipient'. So since we're
      only on the host, we'll re-document with host_id and device_id:

      OPEN(host_id, 0, 'shell:XXX')
      READY/OKAY(device_id, host_id, '')
      WRITE(0, host_id, 'data')
      CLOSE(device_id, host_id, '')
    """

    ids = [b'SYNC', b'CNXN', b'AUTH', b'OPEN', b'OKAY', b'CLSE', b'WRTE']
    commands, constants = MakeWireIDs(ids)
    # An ADB message is 6 words in little-endian.
    format = b'<6I'

    connections = 0

    def __init__(self, command=None, arg0=None, arg1=None, data=b''):
        self.command = self.commands[command]
        self.magic = self.command ^ 0xFFFFFFFF
        self.arg0 = arg0
        self.arg1 = arg1
        self.data = data

    @property
    def checksum(self):
        return self.CalculateChecksum(self.data)

    @staticmethod
    def CalculateChecksum(data):
        # The checksum is just a sum of all the bytes. I swear.
        if isinstance(data, bytearray):
            total = sum(data)
        elif isinstance(data, bytes):
            if data and isinstance(data[0], bytes):
                # Python 2 bytes (str) index as single-character strings.
                total = sum(map(ord, data))
            else:
                # Python 3 bytes index as numbers (and PY2 empty strings sum() to 0)
                total = sum(data)
        else:
            # Unicode strings (should never see?)
            total = sum(map(ord, data))
        return total & 0xFFFFFFFF

    def Pack(self):
        """Returns this message in an over-the-wire format."""
        return struct.pack(self.format, self.command, self.arg0, self.arg1,
                           len(self.data), self.checksum, self.magic)

    @classmethod
    def Unpack(cls, message):
        try:
            cmd, arg0, arg1, data_length, data_checksum, unused_magic = struct.unpack(
                cls.format, message)
        except struct.error as e:
            raise ValueError('Unable to unpack ADB command.', cls.format, message, e)
        return cmd, arg0, arg1, data_length, data_checksum

    def Send(self, usb, timeout_ms=None):
        """Send this message over USB."""
        usb.BulkWrite(self.Pack(), timeout_ms)
        usb.BulkWrite(self.data, timeout_ms)

    @classmethod
    def Read(cls, usb, expected_cmds, timeout_ms=None, total_timeout_ms=None):
        """Receive a response from the device."""
        total_timeout_ms = usb.Timeout(total_timeout_ms)
        start = time.time()
        while True:
            msg = usb.BulkRead(24, timeout_ms)
            cmd, arg0, arg1, data_length, data_checksum = cls.Unpack(msg)
            command = cls.constants.get(cmd)
            if not command:
                raise InvalidCommandError(
                    'Unknown command: %x' % cmd, cmd, (arg0, arg1))
            if command in expected_cmds:
                break

            if time.time() - start > total_timeout_ms:
                raise InvalidCommandError(
                    'Never got one of the expected responses (%s)' % expected_cmds,
                    cmd, (timeout_ms, total_timeout_ms))

        if data_length > 0:
            data = bytearray()
            while data_length > 0:
                temp = usb.BulkRead(data_length, timeout_ms)
                if len(temp) != data_length:
                    print(
                        "Data_length {} does not match actual number of bytes read: {}".format(data_length, len(temp)))
                data += temp

                data_length -= len(temp)

            actual_checksum = cls.CalculateChecksum(data)
            if actual_checksum != data_checksum:
                raise InvalidChecksumError(
                    'Received checksum %s != %s', (actual_checksum, data_checksum))
        else:
            data = b''
        return command, arg0, arg1, bytes(data)

    @classmethod
    def Connect(cls, usb, banner=b'notadb', rsa_keys=None, auth_timeout_ms=100):
        """Establish a new connection to the device.

        Args:
          usb: A USBHandle with BulkRead and BulkWrite methods.
          banner: A string to send as a host identifier.
          rsa_keys: List of AuthSigner subclass instances to be used for
              authentication. The device can either accept one of these via the Sign
              method, or we will send the result of GetPublicKey from the first one
              if the device doesn't accept any of them.
          auth_timeout_ms: Timeout to wait for when sending a new public key. This
              is only relevant when we send a new public key. The device shows a
              dialog and this timeout is how long to wait for that dialog. If used
              in automation, this should be low to catch such a case as a failure
              quickly; while in interactive settings it should be high to allow
              users to accept the dialog. We default to automation here, so it's low
              by default.

        Returns:
          The device's reported banner. Always starts with the state (device,
              recovery, or sideload), sometimes includes information after a : with
              various product information.

        Raises:
          usb_exceptions.DeviceAuthError: When the device expects authentication,
              but we weren't given any valid keys.
          InvalidResponseError: When the device does authentication in an
              unexpected way.
        """
        # In py3, convert unicode to bytes. In py2, convert str to bytes.
        # It's later joined into a byte string, so in py2, this ends up kind of being a no-op.
        if isinstance(banner, str):
            banner = bytearray(banner, 'utf-8')

        msg = cls(
            command=b'CNXN', arg0=VERSION, arg1=MAX_ADB_DATA,
            data=b'host::%s\0' % banner)
        msg.Send(usb)
        cmd, arg0, arg1, banner = cls.Read(usb, [b'CNXN', b'AUTH'])
        if cmd == b'AUTH':
            if not rsa_keys:
                raise usb_exceptions.DeviceAuthError(
                    'Device authentication required, no keys available.')
            # Loop through our keys, signing the last 'banner' or token.
            for rsa_key in rsa_keys:
                if arg0 != AUTH_TOKEN:
                    raise InvalidResponseError(
                        'Unknown AUTH response: %s %s %s' % (arg0, arg1, banner))

                # Do not mangle the banner property here by converting it to a string
                signed_token = rsa_key.Sign(banner)
                msg = cls(
                    command=b'AUTH', arg0=AUTH_SIGNATURE, arg1=0, data=signed_token)
                msg.Send(usb)
                cmd, arg0, unused_arg1, banner = cls.Read(usb, [b'CNXN', b'AUTH'])
                if cmd == b'CNXN':
                    return banner
            # None of the keys worked, so send a public key.
            msg = cls(
                command=b'AUTH', arg0=AUTH_RSAPUBLICKEY, arg1=0,
                data=rsa_keys[0].GetPublicKey() + b'\0')
            msg.Send(usb)
            try:
                cmd, arg0, unused_arg1, banner = cls.Read(
                    usb, [b'CNXN'], timeout_ms=auth_timeout_ms)
            except usb_exceptions.ReadFailedError as e:
                if e.usb_error.value == -7:  # Timeout.
                    raise usb_exceptions.DeviceAuthError(
                        'Accept auth key on device, then retry.')
                raise
            # This didn't time-out, so we got a CNXN response.
            return banner
        return banner

    @classmethod
    def Open(cls, usb, destination, timeout_ms=None):
        """Opens a new connection to the device via an OPEN message.

        Not the same as the posix 'open' or any other google3 Open methods.

        Args:
          usb: USB device handle with BulkRead and BulkWrite methods.
          destination: The service:command string.
          timeout_ms: Timeout in milliseconds for USB packets.

        Raises:
          InvalidResponseError: Wrong local_id sent to us.
          InvalidCommandError: Didn't get a ready response.

        Returns:
          The local connection id.
        """
        local_id = 1
        msg = cls(
            command=b'OPEN', arg0=local_id, arg1=0,
            data=destination + b'\0')
        msg.Send(usb, timeout_ms)
        cmd, remote_id, their_local_id, _ = cls.Read(usb, [b'CLSE', b'OKAY'],
                                                     timeout_ms=timeout_ms)
        if local_id != their_local_id:
            raise InvalidResponseError(
                'Expected the local_id to be {}, got {}'.format(local_id, their_local_id))
        if cmd == b'CLSE':
            # Some devices seem to be sending CLSE once more after a request, this *should* handle it
            cmd, remote_id, their_local_id, _ = cls.Read(usb, [b'CLSE', b'OKAY'],
                                                         timeout_ms=timeout_ms)
            # Device doesn't support this service.
            if cmd == b'CLSE':
                return None
        if cmd != b'OKAY':
            raise InvalidCommandError('Expected a ready response, got {}'.format(cmd),
                                      cmd, (remote_id, their_local_id))
        return _AdbConnection(usb, local_id, remote_id, timeout_ms)

    @classmethod
    def Command(cls, usb, service, command='', timeout_ms=None):
        """One complete set of USB packets for a single command.

        Sends service:command in a new connection, reading the data for the
        response. All the data is held in memory, large responses will be slow and
        can fill up memory.

        Args:
          usb: USB device handle with BulkRead and BulkWrite methods.
          service: The service on the device to talk to.
          command: The command to send to the service.
          timeout_ms: Timeout for USB packets, in milliseconds.

        Raises:
          InterleavedDataError: Multiple streams running over usb.
          InvalidCommandError: Got an unexpected response command.

        Returns:
          The response from the service.
        """
        return ''.join(cls.StreamingCommand(usb, service, command, timeout_ms))

    @classmethod
    def StreamingCommand(cls, usb, service, command='', timeout_ms=None):
        """One complete set of USB packets for a single command.

        Sends service:command in a new connection, reading the data for the
        response. All the data is held in memory, large responses will be slow and
        can fill up memory.

        Args:
          usb: USB device handle with BulkRead and BulkWrite methods.
          service: The service on the device to talk to.
          command: The command to send to the service.
          timeout_ms: Timeout for USB packets, in milliseconds.

        Raises:
          InterleavedDataError: Multiple streams running over usb.
          InvalidCommandError: Got an unexpected response command.

        Yields:
          The responses from the service.
        """
        if not isinstance(command, bytes):
            command = command.encode('utf8')
        connection = cls.Open(
            usb, destination=b'%s:%s' % (service, command),
            timeout_ms=timeout_ms)
        for data in connection.ReadUntilClose():
            yield data.decode('utf8')

    @classmethod
    def InteractiveShellCommand(cls, conn, cmd=None, strip_cmd=True, delim=None, strip_delim=True, clean_stdout=True):
        """Retrieves stdout of the current InteractiveShell and sends a shell command if provided
        TODO: Should we turn this into a yield based function so we can stream all output?

        Args:
          conn: Instance of AdbConnection
          cmd: Optional. Command to run on the target.
          strip_cmd: Optional (default True). Strip command name from stdout.
          delim: Optional. Delimiter to look for in the output to know when to stop expecting more output
          (usually the shell prompt)
          strip_delim: Optional (default True): Strip the provided delimiter from the output
          clean_stdout: Cleanup the stdout stream of any backspaces and the characters that were deleted by the backspace
        Returns:
          The stdout from the shell command.
        """

        if delim is not None and not isinstance(delim, bytes):
            delim = delim.encode('utf-8')

        # Delimiter may be shell@hammerhead:/ $
        # The user or directory could change, making the delimiter somthing like root@hammerhead:/data/local/tmp $
        # Handle a partial delimiter to search on and clean up
        if delim:
            user_pos = delim.find(b'@')
            dir_pos = delim.rfind(b':/')
            if user_pos != -1 and dir_pos != -1:
                partial_delim = delim[user_pos:dir_pos + 1]  # e.g. @hammerhead:
            else:
                partial_delim = delim
        else:
            partial_delim = None

        stdout = ''
        stdout_stream = BytesIO()
        original_cmd = ''

        try:

            if cmd:
                original_cmd = str(cmd)
                cmd += '\r'  # Required. Send a carriage return right after the cmd
                cmd = cmd.encode('utf8')

                # Send the cmd raw
                bytes_written = conn.Write(cmd)

                if delim:
                    # Expect multiple WRTE cmds until the delim (usually terminal prompt) is detected

                    data = b''
                    while partial_delim not in data:
                        cmd, data = conn.ReadUntil(b'WRTE')
                        stdout_stream.write(data)

                else:
                    # Otherwise, expect only a single WRTE
                    cmd, data = conn.ReadUntil(b'WRTE')

                    # WRTE cmd from device will follow with stdout data
                    stdout_stream.write(data)

            else:

                # No cmd provided means we should just expect a single line from the terminal. Use this sparingly
                cmd, data = conn.ReadUntil(b'WRTE')
                if cmd == b'WRTE':
                    # WRTE cmd from device will follow with stdout data
                    stdout_stream.write(data)
                else:
                    print("Unhandled cmd: {}".format(cmd))

            cleaned_stdout_stream = BytesIO()
            if clean_stdout:
                stdout_bytes = stdout_stream.getvalue()

                bsruns = {}  # Backspace runs tracking
                next_start_pos = 0
                last_run_pos, last_run_len = find_backspace_runs(stdout_bytes, next_start_pos)

                if last_run_pos != -1 and last_run_len != 0:
                    bsruns.update({last_run_pos: last_run_len})
                    cleaned_stdout_stream.write(stdout_bytes[next_start_pos:(last_run_pos - last_run_len)])
                    next_start_pos += last_run_pos + last_run_len

                while last_run_pos != -1:
                    last_run_pos, last_run_len = find_backspace_runs(stdout_bytes[next_start_pos:], next_start_pos)

                    if last_run_pos != -1:
                        bsruns.update({last_run_pos: last_run_len})
                        cleaned_stdout_stream.write(stdout_bytes[next_start_pos:(last_run_pos - last_run_len)])
                        next_start_pos += last_run_pos + last_run_len

                cleaned_stdout_stream.write(stdout_bytes[next_start_pos:])

            else:
                cleaned_stdout_stream.write(stdout_stream.getvalue())

            stdout = cleaned_stdout_stream.getvalue()

            # Strip original cmd that will come back in stdout
            if original_cmd and strip_cmd:
                findstr = original_cmd.encode('utf-8') + b'\r\r\n'
                pos = stdout.find(findstr)
                while pos >= 0:
                    stdout = stdout.replace(findstr, b'')
                    pos = stdout.find(findstr)

                if b'\r\r\n' in stdout:
                    stdout = stdout.split(b'\r\r\n')[1]

            # Strip delim if requested
            # TODO: Handling stripping partial delims here - not a deal breaker the way we're handling it now
            if delim and strip_delim:
                stdout = stdout.replace(delim, b'')

            stdout = stdout.rstrip()

        except Exception as e:
            print("InteractiveShell exception (most likely timeout): {}".format(e))

        return stdout