Wait specifically for pulseaudio to start in the VM, instead of just
waiting few seconds.
Also, improve failure message to distinguish total lack of audio from
just missing few samples.
Volume with save_on_stop=False and snap_on_start=False exists only when
VM is running and this is already handled under is_dirty() condition.
For non-running VMs, skip LVM resize step and only update internal size
attribute.
FixesQubesOS/qubes-issues#5645
When volume is resized, underlying LVM is adjusted if exists. For
persistent volumes it is enough, as generally the driver prefers
underlying LVM size than internal attribute. But volatile volume is
removed at vm shutdown, so that value is lost.
Fix it by updating Volume.size attribute too, to be updated in qubes.xml
later too.
FixesQubesOS/qubes-issues#5645
* origin/pr/316:
storage/reflink: trivial style tweaks
storage/reflink: comment on _get_size() use in start()
storage/reflink: don't bother using _get_size() in create()
storage/reflink: delete all images at beginning of create()
storage/reflink: get VM dir from less arbitrary-looking path
storage/reflink: factor out _remove_all_images()
storage/reflink: _remove_incomplete_{files -> images}()
storage/reflink: omit redundant comment
Ensure that there are no leftover image files for the volume, e.g. from
an unsuccessful removal of a previous incarnation of this vid, or from
an messily restored pool filesystem backup. We don't want to preserve
any stale data (revisions) or metadata (size) in the new incarnation.
The size config parameter might be a string coming from XML.
The Volume base class handles the conversion to integer already.
FixesQubesOS/qubes-issues#5219.
This should allow importing a volume and changing the size at the
same time, without performing the resize operation on original
volume first.
The internal API has been renamed to internal.vm.volume.ImportBegin
to avoid confusion, and for symmetry with ImportEnd.
See QubesOS/qubes-issues#5239.
* origin/pr/310:
storage/reflink: fix comment
storage/reflink: bail out early on most FICLONE errnos
storage/reflink: pool.setup_check -> pool._setup_check
Don't fall back on 'cp' if the FICLONE ioctl gives an errno that's not
plausibly reflink specific, because in such a case any fallback could
theoretically mask real but intermittent system/storage errors.
Looking through ioctl_ficlone(2) and the kernel source, it should be
sufficient to do the fallback only on EBADF/EINVAL/EOPNOTSUPP/EXDEV.
(EISDIR/ETXTBSY don't apply to this storage driver, which will never
legitimately attempt to reflink a directory or an active - in the
storage domain - swap file.)
* origin/pr/303:
Update tests after adding /connected-ips
Also reload /connected-ips on firewall change / domain spawn
Also store /connected-ips6 for machines that have IPv6 addresses
Don't try to write to qubesdb of an offline VM
Maintain a list of connected machine IPs in qubesdb
Extension objects are singletons and normally do not require any special
cleanup. But in case of tests, we try to remove all the qubes objects
between tests and the cache in usb extension makes it hard.
Add a 'qubes-close' event that extensions can handle to remove extra
references stored in extension objects themselves.
Due to strangeness of KeyError (it overrrides __str__ method) in some
cases exceptions received superflous quotation marks when inheriting
from it.
fixesQubesOS/qubes-issues#5106
* origin/pr/298:
tests/network: let xl devd bring the interfaces up
tests/network: improve error reporting
api/admin: implement *.property.GetAll methods
Avoid resetting clocksync service of just enabled clockvm
doc/tests: extend qubes-specific quirks in tests
tests: add include and exclude lists for extra tests loader
xl devd doesn't use startup notify, so when the service is started
(according to systemd) it may still be initializing interfaces. Add a
little sleep for that.
Allow getting all the VM properties with one call. This greatly improve
performance of an applications retrieving many/all of them (qvm-ls,
qubes manager etc)
QubesOS/qubes-issues#5415FixesQubesOS/qubes-issues#3293
One alternative would look like
import ctypes
sizeof_int = ctypes.sizeof(ctypes.c_int)
FICLONE = (1073741824 % 256**sizeof_int) | 37897 | (sizeof_int << 16)
but, even if the above really(?) is a 100% correct Python port of
$ echo FICLONE | cpp -include linux/fs.h | tail -n 1
it still seems more likely that the ctypes package is somehow buggy
somewhere than for Qubes storage to run on an exotic architecture with
non 32 bit ints (in the foreseeable future).
So just document the baked in assumption.
The default (= text) mode for a loop device which contains a VM image
looked weird, even though it didn't make a difference here because the
dev_io object was never actually read from.
When setting global clockvm property, 'clocksync' service is
automatically added to the new value and then removed from the old one.
But if the new value is the same as the old one, the service gets
removed from the just set new value.
Check for this case explicitly.
FixesQubesOS/qubes-issues#4939
'extra' tests run is getting ridiculously long. Allow splitting it into
several jobs. Since this appears as just one class from the test loader
perspective, implement it as environment variables:
- QUBES_TEST_EXTRA_INCLUDE - load just selected tests
- QUBES_TEST_EXTRA_EXCLUDE - skip selected tests (to select "the rest"
tests)
* origin/pr/297:
doc: remove useless _static generated by sphinx
cleanup-dispvms: fix python shebang
spec: fix missing dependency
Fix Sphinx 2 new API for Fedora 31+
doc: Make PEP8 happier
qmemmand: separate SystemState init xc and xs to a 'init' method
doc: drop moved elsewhere components
Only first 4 disks can be emulated as IDE disks by QEMU. Specifically,
CDROM must be one of those first 4 disks, otherwise it will be
ignored. This is especially important if one wants to boot the VM from
that CDROM.
Since xvdd normally is a kernel-related volume (boot image, modules) it
makes perfect sense to re-use it for CDROM. It is either set for kernel
volume (in which case, VM should boot from it and not the CDROM), or
(possibly bootable) CDROM.
This needs to be done in two places:
- BlockExtension for dynamic attach
- libvirt xen.xml - for before-boot attach
In theory the latter would be enough, but it would be quite confusing
that device will get different options depending on when it's attached
(in addition to whether the kernel is set - introduced here).
This all also means, xvdd not always is a "system disk". Adjust listing
connected disks accordingly.
- allow TestQubesDB to be populated with initial data
- support list() method
- allow to register pre-created VM instance (useful for AdminVM, which
don't accept setting qid)
Pool.volumes property is implemented in a base class, individual drivers
should provide list_volumes() method as a backend for that property.
Fix this in a LinuxKernel pool.
Similar to admin.vm.volume.List. There are still other
admin.pool.volume.* methods missing, but lets start with just this one.
Those with both pool name and volume id arguments may need some more
thoughts.
Don't realy on a volume configuration only, it's easy to miss updating
it. Specifically, import_volume() function didn't updated the size based
on the source volume.
The size that the actual VM sees is based on the
file size, and so is the filesystem inside. Outdated size property can
lead to a data loss if the user perform an action based on a incorrect
assumption - like extending size, which actually will shrink the volume.
FixesQubesOS/qubes-issues#4821
Handle this case specifically, as way too many users ignore the message
during installation and complain it doesn't work later.
Name the problem explicitly, instead of pointing at libvirt error log.
FixesQubesOS/qubes-issues#4689
admin.pool.UsageDetails reports the usage data, unlike
admin.pool.Info, which should report the config/unchangeable data.
At the moment admin.Pool.Info still reports usage, to maintain
compatibility, but once all relevant tools are updated,
it should just return configuration data.
Added usage_details method to Pool class
(returns a dictionary with detailed information
on pool usage) and LVM implementation that returns
metadata info.
Needed for QubesOS/qubes-issues#5053
* origin/pr/287:
app: fix docstrings PEP8 refactor
tests: remove iptables_header content in test_622_qdb_keyboard_layout
tests: add test for guivm and keyboard_layout
gui: simplify setting guivm xid and keyboard layout
Make pylint happier
gui: set keyboard layout from feature
Handle GuiVM properties
Make PEP8 happier
Similar to domain-start-failed, add an event fired when
domain-pre-shutdown was fired but the actual operation failed.
Note it might not catch all the cases, as shutdown() may be called with
wait=False, which means it won't wait fot the actual shutdown. In that
case, timeout won't result in domain-shutdown-failed event.
QubesOS/qubes-issues#5380
Move this functionality from our custom runner (qubes.tests.run),
into base test class. This is very useful for correlating logs, so lets
have it with nose2 runner too.
Prevent starting a VM while it's being removed. Something could try to
start a VM just after it's being killer but before removing it (Whonix
example from previous commit is real-life case). The window specifically
is between kill() call and removing it from collection
(`del app.domains[vm.qid]`). Grab a startup_lock for the whole operation
to prevent it.
Check early (but after grabbing a startup_lock) if VM isn't just
removed. This could happen if someone grabs its reference from other
places (netvm of something else?) or just before removing it.
This commit makes the simple removal from the collection (done as the
first step in admin.vm.Remove implementation) efficient way to block
further VM startups, without introducing extra properties.
For this to be effective, removing from the collection, needs to happen
with the startup_lock held. Modify admin.vm.Remove accordingly.
There are cases when destination domain doesn't exist when the call gets
to qubesd. Namely:
1. The call comes from dom0, which bypasses qrexec policy
2. Domain was removed between checking the policy and here
Handle the the same way as if the domain wouldn't exist at policy
evaluation stage either - i.e. refuse the call.
On the client side it doesn't change much, but on the server call it
avoids ugly, useless tracebacks in system journal.
FixesQubesOS/qubes-issues#5105
Allow to manual inspect test environment after test fails. This is
similar to --do-not-clean option we had in R3.2.
The decorator should be used only while debugging and should never be
applied to the code committed into repository.
Domain shutdown handling may take extended amount of time, especially on
slow machine (all the LVM teardown etc). Take care of it by
synchronizing using vm.startup_lock, instead of increasing constant
delay. This way, the shutdown event handler needs to be started within
3s, not finish in this time.
When libvirt daemon is restarted, qubesd attempt to re-connect to the
new instance transparently (through virConnect object wrapper). But the
code lacked re-registering event handlers.
Fix this by adding reconnect callback argument to virConnectWrappper, to
be called after new connection is established. This callback will
additionally get old connection as an argument, if any cleanup is
needed. The old connection is closed just after callback returns.
Use this to re-register event handler, but also unregister old handler
first. While full unregister wont work on since old libvirt daemon
instance is dead already, it will still cleanup client structures.
Since the old libvirt connection is closed now, adjust also domain
reconnection logic, to handle stale connection object. In that case
isAlive() call throws an exception.
FixesQubesOS/qubes-issues#5303
Qubesd wrongly required default_template global property to be not None.
Furthermore, even without hard failure set, require_property method
raised an exception in case of a property having incorrect None value.
It now logs an error message instead, as designed.
fixesQubesOS/qubes-issues#5326
