Some kernels (like pvgrub2) may not provide modules.img and it isn't an
error. Don't break VM startup in that case, skip that device instead.
FixesQubesOS/qubes-issues#3563
If revisions_to_keep is 0, it may nevertheless have been > 0 before, so
it makes sense to call _remove_revisions() and hold back none (not all)
of the revisions in this case.
This adds the file-reflink storage driver. It is never selected
automatically for pool creation, especially not the creation of
'varlibqubes' (though it can be used if set up manually).
The code is quite small:
reflink.py lvm.py file.py + block-snapshot
sloccount 334 lines 447 (134%) 570 (171%)
Background: btrfs and XFS (but not yet ZFS) support instant copies of
individual files through the 'FICLONE' ioctl behind 'cp --reflink'.
Which file-reflink uses to snapshot VM image files without an extra
device-mapper layer. All the snapshots are essentially freestanding;
there's no functional origin vs. snapshot distinction.
In contrast to 'file'-on-btrfs, file-reflink inherently avoids
CoW-on-CoW. Which is a bigger issue now on R4.0, where even AppVMs'
private volumes are CoW. (And turning off the lower, filesystem-level
CoW for 'file'-on-btrfs images would turn off data checksums too, i.e.
protection against bit rot.)
Also in contrast to 'file', all storage features are supported,
including
- any number of revisions_to_keep
- volume.revert()
- volume.is_outdated
- online fstrim/discard
Example tree of a file-reflink pool - *-dirty.img are connected to Xen:
- /var/lib/testpool/appvms/foo/volatile-dirty.img
- /var/lib/testpool/appvms/foo/root-dirty.img
- /var/lib/testpool/appvms/foo/root.img
- /var/lib/testpool/appvms/foo/private-dirty.img
- /var/lib/testpool/appvms/foo/private.img
- /var/lib/testpool/appvms/foo/private.img@2018-01-02T03:04:05Z
- /var/lib/testpool/appvms/foo/private.img@2018-01-02T04:05:06Z
- /var/lib/testpool/appvms/foo/private.img@2018-01-02T05:06:07Z
- /var/lib/testpool/appvms/bar/...
- /var/lib/testpool/appvms/...
- /var/lib/testpool/template-vms/fedora-26/...
- /var/lib/testpool/template-vms/...
It looks similar to a 'file' pool tree, and in fact file-reflink is
drop-in compatible:
$ qvm-shutdown --all --wait
$ systemctl stop qubesd
$ sed 's/ driver="file"/ driver="file-reflink"/g' -i.bak /var/lib/qubes/qubes.xml
$ systemctl start qubesd
$ sudo rm -f /path/to/pool/*/*/*-cow.img*
If the user tries to create a fresh file-reflink pool on a filesystem
that doesn't support reflinks, qvm-pool will abort and mention the
'setup_check=no' option. Which can be passed to force a fallback on
regular sparse copies, with of course lots of time/space overhead. The
same fallback code is also used when initially cloning a VM from a
foreign pool, or from another file-reflink pool on a different
mountpoint.
'journalctl -fu qubesd' will show all file-reflink copy/rename/remove
operations on VM creation/startup/shutdown/etc.
Even when volume is not persistent (like TemplateBasedVM:root), it
should be resizeable. Just the new size, similarly to the volume
content, will be reverted after qube shutdown.
Additionally, when VM is running, volume resize should affect _only_ its
temporary snapshot. This way resize can be properly reverted together
with actual volume changes (which include resize2fs call).
FixesQubesOS/qubes-issues#3519
Do not check for accepted value only in constructor, do that in property
setter. This will allow enforcing the limit regardless of how the value
was set.
This is preparation for dynamic revisions_to_keep change.
QubesOS/qubes-issues#3256
- make it clear that failed qubes.ResizeDisk service call means the need
to resize filesystem manually (but not necessarily the volume itself)
- propagate exceptions raised by async storage pool implementations
Related QubesOS/qubes-issues#3173
* bug3164:
tests: add regression test for #3164
storage/lvm: make sure volume cache is refreshed after changes
storage/lvm: fix Volume.verify()
storage/lvm: remove old volume only after successfully cloning new one
In some cases, it may happen that new volume (`self._vid_snap`) does not
exists. This is normally an error, but even in such a case, do not
remove the only remaining instance of volume (`self.vid`). Instead,
rename it temporarily and remove only after new volume is successfully
cloned.
FixesQubesOS/qubes-issues#3164
This applies to qvm-template-postprocess, which at the beginning try to
resize root volume to appropriate size. It makes more sense to silently
succeed here, instead of forcing every client-side utility to check if
the volume have already desired size.
On certain locales (e.g. danish) `usage_percent` will output a comma-separated number, which will make `attr` point the last two decimal points, s.t. `return vol_info['attr'][4] == 'a'` (in the `verify` func) will fail and `qubesd` wont run.
First, cache objects created with init_volume - this is the only place
where we have full volume configuration (including snap_on_start and
save_on_stop properties).
But also implement get_volume method, to get a volume instance for given
volume id. Such volume instance may be incomplete (other attributes are
available only in owning domain configuration), but it will be enough
for basic operations - like cheching and changing its size, cloning
etc.
Listing volumes still use list of physically present volumes.
This makes it possible to start qubesd service, without physical
presence of some storage devices. Starting VMs using such storage would
still fail, of course.
FixesQubesOS/qubes-issues#2960
* tests-storage:
tests: register libvirt events
tests: even more agressive cleanup in tearDown
app: do not wrap libvirt_conn.close() in auto-reconnect wrapper
api: keep track of established connections
tests: drop VM cleanup from tearDownClass, fix asyncio usage in tearDown
storage: fix Storage.clone and Storage.clone_volume
tests: more tests fixes
firewall: raise ValueError on invalid hostname in dsthost=
qmemman: don't load qubes.xml
tests: fix AdminVM test
tests: create temporary files in /tmp
tests: remove renaming test - it isn't supported anymore
tests: various fixes for storage tests
tests: fix removing LVM volumes
tests: fix asyncio usage in some tests
tests: minor fixes to api/admin tests
storage/file: create -cow.img only when needed
storage: move volume_config['source'] filling to one place
app: do not create 'default' storage pool
app: add missing setters for default_pool* global properties
* qdb-watch:
tests: add qdb_watch test
ext/block: make use of QubesDB watch
vm: add API for watching changes in QubesDB
vm: optimize imports
api/admin: don't send internal events in admin.Events
Add explanation why admin.vm.volume.Import is a custom script
Follow change of qubesdb path return type
Rename vm.qdb to vm.untrusted_qdb
Don't set 'source' volume in various places (each VM class constructor
etc), do it as part of volume initialization. And when it needs to be
re-calculated, call storage.init_volume again.
This code was duplicated, and as usual in such a case, those copies
were different - one have set 'size', the other one not.
QubesOS/qubes-issues#2256
Since we have app.default_pool* properties, create appropriately named
pool and let those properties choose the right pool. This also means we
don't need to specify pool name in default volume config anymore
QubesOS/qubes-issues#2256
