Add property for IPv6 address ('ip6'). Build default value similarly to
IPv4 - common prefix + QID or Disp ID (for DispVMs).
This all is disabled unless 'ipv6' feature is enabled. It is inherited
from netvm (not template).
Even when enabled, VM may decide to not use it - or simply not support
it.
QubesOS/qubes-issues#718
If HVM have PCI device, it can't use PoD, so need 'maxmem' memory to be
started. Request that much from qmemman.
Note that is is somehow independent of enabling or not dynamic memory
management for the VM (`service.meminfo-writer` feature). Even if VM
initially had assigned maxmem memory, it can be later ballooned down.
QubesOS/qubes-issues#3207
* 20171107-tests-backup-api-misc:
test: make race condition on xterm close less likely
tests/backupcompatibility: fix handling 'internal' property
backup: fix handling target write error (like no disk space)
tests/backupcompatibility: drop R1 format tests
backup: use offline_mode for backup collection
qubespolicy: fix handling '$adminvm' target with ask action
app: drop reference to libvirt object after undefining it
vm: always log startup fail
api: do not log handled errors sent to a client
tests/backups: convert to new restore handling - using qubesadmin module
app: clarify error message on failed domain remove (used somewhere)
Fix qubes-core.service ordering
The previous version did not ensure that the stopped/shutdown event was
handled before a new VM start. This can easily lead to problems like in
QubesOS/qubes-issues#3164.
This improved version now ensures that the stopped/shutdown events are
handled before a new VM start.
Additionally this version should be more robust against unreliable
events from libvirt. It handles missing, duplicated and delayed stopped
events.
Instead of one 'domain-shutdown' event there are now 'domain-stopped'
and 'domain-shutdown'. The later is generated after the former. This way
it's easy to run code after the VM is shutdown including the stop of
it's storage.
vm.create_qdb_entries can be called multiple times - for example when
changing VM IP. Move starting qdb watcher to start(). And just in case,
cleanup old watcher (if still exists) before starting new one.
This fixes one FD leak.
Catch exception there and log it. Otherwise asyncio complains about not
retrieved exception. There is no one else to handle this exception,
because shutdown event is triggered from libvirt, not any Admin API.
If VM startup failed before starting anything (even in paused state),
there will be no further event, not even domain-shutdown. This makes it
hard for event-listening applications (like domains tray) to account
domain state. Fix this by emiting domain-start-failed event in every
case of failed startup after emiting domain-pre-start.
Related QubesOS/qubes-issues#3100
* services:
tests: check clockvm-related handlers
doc: include list of extensions
qubesvm: fix docstring
ext/services: move exporting 'service.*' features to extensions
app: update handling features/service os ClockVM
* tests-storage:
tests: register libvirt events
tests: even more agressive cleanup in tearDown
app: do not wrap libvirt_conn.close() in auto-reconnect wrapper
api: keep track of established connections
tests: drop VM cleanup from tearDownClass, fix asyncio usage in tearDown
storage: fix Storage.clone and Storage.clone_volume
tests: more tests fixes
firewall: raise ValueError on invalid hostname in dsthost=
qmemman: don't load qubes.xml
tests: fix AdminVM test
tests: create temporary files in /tmp
tests: remove renaming test - it isn't supported anymore
tests: various fixes for storage tests
tests: fix removing LVM volumes
tests: fix asyncio usage in some tests
tests: minor fixes to api/admin tests
storage/file: create -cow.img only when needed
storage: move volume_config['source'] filling to one place
app: do not create 'default' storage pool
app: add missing setters for default_pool* global properties
Don't set 'source' volume in various places (each VM class constructor
etc), do it as part of volume initialization. And when it needs to be
re-calculated, call storage.init_volume again.
This code was duplicated, and as usual in such a case, those copies
were different - one have set 'size', the other one not.
QubesOS/qubes-issues#2256
* tests-fixes-1:
api: extract function to make pylint happy
tests/vm: simplify AppVM storage test
storage: do not use deepcopy on volume configs
api: cleanup already started servers when some later failed
tests: fix block devices tests when running on real system
tests: fix some FD leaks
This code is unused now. Theoretically this is_outdated implementation
should be moved to FileVolume, but since we don't have VM reference
there, it isn't possible to read appropriate xenstore entry. As we're
phasing out file pool, simply ignore it for now.
QubesOS/qubes-issues#2256
Those functions are coroutines anyway, so allow event handlers to be
too.
Some of this (`domain-create-on-disk`, `domain-remove-from-disk`) will
be useful for appmenus handling.
Always define those properties, always include them in volume config.
Also simplify overriding pool based on volume type defined by those:
override pool unless snap_on_start=True.
QubesOS/qubes-issues#2256
We've decided to make VM name immutable. This is especially important
for Admin API, where some parts (especially policy) are sticked to the
VM name.
Now, to rename the VM, one need to clone it under new name (thanks to
LVM, this is very quick action), then remove the old one.
FixesQubesOS/qubes-issues#2868
* qubesos/pr/111:
vm: drop 'internal' property
qmemman: make sure to release lock
qmemman: fix meminfo parsing for python 3
devices: drop 'data' and 'frontend_domain' fields, rename 'devclass' to 'bus'
* qubesos/pr/110:
storage: use direct object references, not only identifiers
vm: fix volume_config
storage/lvm: prefix VM LVM volumes with 'vm-'
storage: fix VM rename
Reference objects, not their IDs - this way when object is modified, it
is visible everywhere where it is used. Main changes:
- volume.pool - Pool object
- volume.source - Volume object
Since volume have Pool object reference now, move volume related
functions into Volume class (from Pool class). This avoids horrible
`storage.get_pool(volume).something(volume)` construct.
One issue here is since volume.source reference a Volume object from a
different VM - VM's template, now VM load order is important. Since we
don't have control over it, initialize vm.storage when needed - possibly
while initializing storage of different VM. Since we don't have cycles
in AppVM-TemplateVM dependencies, it is safe.
Also, since this commit, volume.source (if defined) always points at
volume of the same name from VM's template. Using volumes with something
else as a source is no longer supported.
QubesOS/qubes-issues#2256
vm.kernel property have type 'str'. Putting None there makes a lot of
troubles: it gets encoded as 'None' in qubes.xml and then loaded back as
'None' string, not None value. Also it isn't possible to assign None
value to str property throgh Admin API.
kernel='' is equally good to specify "no kernel from dom0".
QubesOS/qubes-issues#2622
While libvirt handle locking itself, there is also Qubes-specific
startup part. Especially starting qrexec-daemon and waiting until
qrexec-agent connect to it. When someone will attempt to start VM the
second time (or simply assume it's already running) - qrexec will not be
connected yet and the operation will fail. Solve the problem by wrapping
the whole vm.start() function with a lock, including a check if VM is
running and waiting for qrexec.
Also, do not throw exception if VM is already running.
This way, after a call to vm.start(), VM will be started with qrexec
connected - regardless of who really started it.
Note that, it will not solve the situation when someone check if VM is
running manually, like:
if not vm.is_running():
yield from vm.start()
Such code should be changed to simply:
yield from vm.start()
FixesQubesOS/qubes-issues#2001FixesQubesOS/qubes-issues#2666
And place them in /qubes-service/ QubesDB directory. This allows
extensions to easily store some data not exposed to VM, but also have
control what VM will see. And at the same time, it make it compatible
with existing services framework
QubesOS/qubes-issues#1637
When libvirt domain is not defined, it isn't running for sure.
This commit fixes the case when vm.is_running() appears anywhere in the
code used during libvirt xml building. In this case, it's mostly about
PCI device description for libvirt.
Do not initialize it only at qubes.xml load time, but re-read vm.kernel
property each time the path is constructed. While at it, add support for
vm.kernel set to 'None' - simply don't include modules.img (xvdd) then.
While at it, adjust implementation to specification: tags don't have
value, only one bit of information (present/not present).
FixesQubesOS/qubes-issues#2686
This is required to get shutdown notification, when it wasn't initiated
by qubesd (for example 'poweroff' command inside of VM).
Libvirt event loop implementation must be registered before making
connection to libvirt, so move it to the beginning of main().
For now, only 'domain-shutdown' event is emited.
User session may not be started at all (for example no qubes packages
installed there), so don't block it in all the cases. Also this would
prevent running 'qubes.WaitForSession' service...
In practice, default value for 'gui' argument is False, so in most cases
user session will be ignored. Which doesn't matter in most cases -
especially for services called by qubesd.
Keep it uniform - QubesVM() object is responsible for handling
vm.dir_path, Storage() is responsible for handling disk volumes (which
may live in that directory
QubesOS/qubes-issues#2256
Allow specific pool implementation to provide asynchronous
implementation. vm.storage.* methods will detect if given implementation
is synchronous or asynchronous and will act accordingly.
Then it's up to pool implementation how asynchronous should be achieved.
Do not force it using threads (`run_in_executor()`). But pool
implementation is free to use threads, if consider it safe in a
particular case.
This commit does not touch any pool implementation - all of them are
still synchronous.
QubesOS/qubes-issues#2256
Management API gives access only to qubes.property. And this is
actually a good thing, so instead of extending it to access also
builtins.property, add a simple decorator to define read-only, stateless
qubes.property.
QubesOS/qubes-issues#2622
qvm-ls tool (as all other tools) will be accessing properties through
API, so no need (nor sense) for this tool-specific attributes in
qubes.property. The only somehow used was ls_width, and in fact it made
the output unnecessary wide.
The tool itself is already moved to core-mgmt-client repository.
QubesOS/qubes-issues#853
* kalkin/device-assignments: (21 commits)
PCI extension cache PCIDevice objects
Make pylint ♥
Fix pylint warning no-else-return
Fix pylint warning len-as-conditional
device-list-attached event returns a dev/options tupples list
DeviceAssignment options are now a dict
Remove WrongAssignment exception
Rename qubes.devices.BlockDevice to qubes.storage.BlockDevice
Update relaxng devices option element
Fix tests broken by the new assignment api
Fix qubes.tests.devices
Fix pci device integration tests
qvm-device add support for assignments
Update ext/pci to new api
BaseVM add DeviceAssignment xml serialization
Migrate DeviceCollection to new API
Add PersistentCollection helper to qubes.devices
Add DeviceAssignment
qvm-device validates device parameters
qvm-device fix handling of non block devices
...