Close transport used to wait for user input, otherwise all further tests
would fail on cleanup (FD leak detected). This in practice is only
useful when using wait_on_fail decorator without --failfast option.
Don't update _size in the getter, so it can be unlocked (which is
helpful for QubesOS/qubes-issues#5935).
!!! If cherry-picking for release4.0, also adjust import_data() to !!!
!!! use self.size (no underscore) instead of self._get_size() !!!
Fix load error reporting - make sure 'err' variable is transferred into
'runTest' function scope.
Then, relax test loading requirements - use 'resolve' instead of 'load',
to bypass dependencies check (defined in setup.py of the package). The
required dependencies should be handled by RPM already, and in some
cases may not match those in python package. An example is PDF
converter, where dependencies at python level are set for the actual
converter, which is irrelevant for running tests from dom0 (tests will
interact with PDF converter inside a VM).
Replace constant audio bytearray with generated sine wave sample
to get more robust results across test environments.
Use zero-crossings as an audio fingerprint
and compare it with sine wave frequency.
XSA-320 / CVE-2020-0543 affects Ivy Bridge and later platforms, but a
fix (microcode update) won't be available for Ivy Bridge. Disable
affected instruction (do not announce it in CPUID - complying software
should not use it then).
The revisions_to_keep should be inherited from the pool by default (or
whatever else logic is in the storage pool driver). When creating VM in
a specific pool, volumes config is re-initialized to include right
defaults. But the config cleaning logic in `_clean_volume_config()`
failed to remove revisions_to_keep property initialized by the default
pool driver. This prevented new pool driver to apply its own default
logic.
An extreme result was inability to create a VM in 'file' pool at all,
because it refuses any revisions_to_keep > 1, and the default LVM
pool has revisions_to_keep = 2.
* origin/pr/344:
travis: pip -> pip3
Update .travis.yml
Drop initial root thin pool definition
Prevent double hyphens in thin_pool parsing
Rename default root thin pool from 'lvm' to 'root'
* rename-property-del-reset:
Fire property-reset event when default value might change
Convert handler to use property-reset instead of property-del
Remove leftovers of default_fw_netvm
Deprecate property-del:name events and introduce property-reset:name instead
Those are only some cases, the most obvious ones:
- defaults inherited from a template
- xid and start_time on domain start/stop
- IP related properties
- icon
QubesOS/qubes-issues#5834
There was also one case of triggering property-{del => reset}
synthetically on default value change. Adjust it too and drop -pre-
event call in that case.
QubesOS/qubes-issues#5834
And the same for -pre- events.
The property-del name is really confusing (it makes sense only for those
with deep knowledge of the implementation), because the property isn't
really deleted - it is only reverted to the "default" state (which most
properties have). So, name the event property-reset, intentionally
similar to property-set, as it is also kind of a value change.
Additionally the property-reset event is meant to be called when the
(dynamic) default value changes. Due to the current implementation, it
is a manual process so it can't be guaranteed to be called in all those
cases, but lets try to cover as much as possible.
FixesQubesOS/qubes-issues#5834
...when verifying old backup restored. It wasn't present in the backup,
but its presence is expected in some cases. Properly setting 'servicevm'
feature is tested elsewhere.
Remove intermediate qubesd-query-fast proxy process.
This requires changing socket protocol to match what qrexec is sending
in the header.
FixesQubesOS/qubes-issues#3293
* origin/pr/326:
ext/admin: workaround for extension's __init__() called multiple times
tests: teardown fixes
travis: include core-qrexec in tests
api/admin: (ext/admin) limit listing VMs based on qrexec policy
api/internal: extract get_system_info() function
- wait for the client be listed in dom0
- report parecord stderr
- allow up to 20ms to be missing, to account for potentially suspended
device initially
Make the check if remote file wasn't removed meaningful. Previously the
user didn't have permission to remote the source file, so even if the
tool would try, it would fail.
Various qrexec tests create auxiliary process (service_proc) as a local
variable. In case of test failure, process cleanup isn't called and may
lead to FD leaks and breaking subsequent tests.
Fix this by always saving such process instance in self.service_proc and
cleaning it up in self.tearDown() (this code is already there).
Add also waiting (and in case of timeout - killing) of a service call
process too.
First the main bug: when meminfo xenstore watch fires, in some cases
(just after starting some domain) XS_Watcher refreshes internal list of
domains before processing the event. This is done specifically to
include new domain in there. But the opposite could happen too - the
domain could be destroyed. In this case refres_meminfo() function raises
an exception, which isn't handled and interrupts the whole xenstore
watch loop. This issue is likely to be triggered by killing the domain,
as this way it could disappear shortly after writing updated meminfo
entry. In case of proper shutdown, meminfo-writer is stopped earlier and
do not write updates just before domain destroy.
Fix this by checking if the requested domain is still there just after
refreshing the list.
Then, catch exceptions in xenstore watch handling functions, to not
interrupt xenstore watch loop. If it gets interrupted, qmemman basically
stops memory balancing.
And finally, clear force_refresh_domain_list flag after refreshing the
domain list. That missing line caused domain refresh at every meminfo
change, making it use some more CPU time.
While at it, change "EOF" log message to something a bit more
meaningful.
Thanks @conorsch for capturing valuable logs.
FixesQubesOS/qubes-issues#4890
... during tests.
qubes.ext.Extension class is a weird thing that tries to make each extension
a singleton. But this unfortunately have a side effect that __init__()
is called separately for each "instance" (created in Qubes()'s
__init__()), even though this is really the same object. During normal
execution this isn't an issue, because there is just one Qubes() object
instance. But during tests, multiple objects are created.
In this particular case, it caused PolicyCache() to be created twice and
the second one overriden the first one - without properly cleaning it
up. This leaks a file descriptor (inotify one). The fact that cleanup()
was called twice too didn't helped, because it was really called on
the same object, the one requiring cleanup was already gone.
Workaround this by checking if policy_cache field is initialize and
avoid re-initialize it. Also, on Qubes() object cleanup remove that
field, so it can be properly initialized on the next test iteration.
Add few missing app.close() calls on test teardown.
Fix socket cleanup in TC_00_QubesDaemonProtocol() - not only close the
FD, but also unregister it from asyncio event loop.
Various Admin API calls, when directed at dom0, retrieve global system
view instead of a specific VM. This applies to admin.vm.List (called at
dom0 retrieve full VM list) and admin.Events (called at dom0 listen for
events of all the VMs). This makes it tricky to configure a management
VM with access to limited set of VMs only, because many tools require
ability to list VMs, and that would return full list.
Fix this issue by adding a filter to admin.vm.List and admin.Events
calls (using event handlers in AdminExtension) that filters the output
using qrexec policy. This version evaluates policy for each VM or event
(but loads only once). If the performance will be an issue, it can be
optimized later.
FixesQubesOS/qubes-issues#5509
* origin/pr/330:
gui: fixes from Marek's comments
gui: improvements of feature keyboard layout checks
tests: adapt tests for keyboard-layout
gui: drop legacy qubes-keyboard support
and not mark it as expected failure anymore. Note the removal of the
expected failure isn't just about the changes here, but also about the
actual fix on the qrexec side (ffafd01 "Fix not closed file descriptors in
qubes-rpc-multiplexer" commit in core-qrexec repository).
QubesVM.run_for_stdio() by default captures stderr. In case of call fail
(non-zero return code), captured stderr is included in the exception
object, but isn't printed by default CalledProcessError message.
Make it visible by:
- handling CalledProcessError and including in the test failure message
(when exception is captured already)
- not capturing stderr (if no exception handling is present in the
test)
The main use case for this function is to create qrexec services in VMs.
Since qrexec now require service scripts to be executable, make
create_remote_file() adjust permissions.
If any test-* VMs remains from previous test run, there are removed
before test. self.app doesn't exist at this point, so don't require it
in self.remove_vms().
This commit adds a test case for the QubesVM class's is_fully_usable
method. The verified scenarios are as follows:
* The VM has qrexec enabled, and the qrexec service has been
successfully started.
(The VM becomes "fully usable" in this case.)
* The VM has qrexec enabled, and the qrexec service has failed to start
(Error handling case; the VM is *not* fully usable.)
* The VM does *not* have qrexec enabled.
(The VM becomes "fully usable" in this case.)
Prior to this commit, a properly configured Linux HVM would not
transition from the 'Transient' state to the 'Running' state according
to qvm-ls output, even if the HVM in question had the 'qrexec' feature
disabled.
This issue is caused by an unconditional qrexec check in the
'on_domain_is_fully_usable' method, and is resolved by adding
a check that short-circuits the qrexec check if the aforementioned
feature is not enabled for the VM in question.
* origin/pr/295:
tests: fix tag name in audiovm test
tests: ensure notin while setting Audio/Gui VM
gui: add checks for changing/removing guivm
audio: add checks for changing/removing audiovm
audio/gui: use simply vm.tags instead of list()
tests: fix tests for gui/audio vm
Make pylint happy
gui/audio: fixes from Marek's comments
Allow AudioVM to be ran after any attached qubes
Allow GuiVM to be ran after any attached qubes
xid: ensure vm is not running
tests: fix missing default audiovm and guivm tags
gui, audio: better handling of start/stop guivm/audiovm
gui, audio: ensure guivm and audiovm tag are set
Support for AudioVM
Wait specifically for pulseaudio to start in the VM, instead of just
waiting few seconds.
Also, improve failure message to distinguish total lack of audio from
just missing few samples.
Volume with save_on_stop=False and snap_on_start=False exists only when
VM is running and this is already handled under is_dirty() condition.
For non-running VMs, skip LVM resize step and only update internal size
attribute.
FixesQubesOS/qubes-issues#5645
When volume is resized, underlying LVM is adjusted if exists. For
persistent volumes it is enough, as generally the driver prefers
underlying LVM size than internal attribute. But volatile volume is
removed at vm shutdown, so that value is lost.
Fix it by updating Volume.size attribute too, to be updated in qubes.xml
later too.
FixesQubesOS/qubes-issues#5645
* origin/pr/316:
storage/reflink: trivial style tweaks
storage/reflink: comment on _get_size() use in start()
storage/reflink: don't bother using _get_size() in create()
storage/reflink: delete all images at beginning of create()
storage/reflink: get VM dir from less arbitrary-looking path
storage/reflink: factor out _remove_all_images()
storage/reflink: _remove_incomplete_{files -> images}()
storage/reflink: omit redundant comment
Ensure that there are no leftover image files for the volume, e.g. from
an unsuccessful removal of a previous incarnation of this vid, or from
an messily restored pool filesystem backup. We don't want to preserve
any stale data (revisions) or metadata (size) in the new incarnation.
The size config parameter might be a string coming from XML.
The Volume base class handles the conversion to integer already.
FixesQubesOS/qubes-issues#5219.
This should allow importing a volume and changing the size at the
same time, without performing the resize operation on original
volume first.
The internal API has been renamed to internal.vm.volume.ImportBegin
to avoid confusion, and for symmetry with ImportEnd.
See QubesOS/qubes-issues#5239.
* origin/pr/310:
storage/reflink: fix comment
storage/reflink: bail out early on most FICLONE errnos
storage/reflink: pool.setup_check -> pool._setup_check
Don't fall back on 'cp' if the FICLONE ioctl gives an errno that's not
plausibly reflink specific, because in such a case any fallback could
theoretically mask real but intermittent system/storage errors.
Looking through ioctl_ficlone(2) and the kernel source, it should be
sufficient to do the fallback only on EBADF/EINVAL/EOPNOTSUPP/EXDEV.
(EISDIR/ETXTBSY don't apply to this storage driver, which will never
legitimately attempt to reflink a directory or an active - in the
storage domain - swap file.)
* origin/pr/303:
Update tests after adding /connected-ips
Also reload /connected-ips on firewall change / domain spawn
Also store /connected-ips6 for machines that have IPv6 addresses
Don't try to write to qubesdb of an offline VM
Maintain a list of connected machine IPs in qubesdb
Extension objects are singletons and normally do not require any special
cleanup. But in case of tests, we try to remove all the qubes objects
between tests and the cache in usb extension makes it hard.
Add a 'qubes-close' event that extensions can handle to remove extra
references stored in extension objects themselves.
Due to strangeness of KeyError (it overrrides __str__ method) in some
cases exceptions received superflous quotation marks when inheriting
from it.
fixesQubesOS/qubes-issues#5106
* origin/pr/298:
tests/network: let xl devd bring the interfaces up
tests/network: improve error reporting
api/admin: implement *.property.GetAll methods
Avoid resetting clocksync service of just enabled clockvm
doc/tests: extend qubes-specific quirks in tests
tests: add include and exclude lists for extra tests loader
xl devd doesn't use startup notify, so when the service is started
(according to systemd) it may still be initializing interfaces. Add a
little sleep for that.
Allow getting all the VM properties with one call. This greatly improve
performance of an applications retrieving many/all of them (qvm-ls,
qubes manager etc)
QubesOS/qubes-issues#5415FixesQubesOS/qubes-issues#3293
One alternative would look like
import ctypes
sizeof_int = ctypes.sizeof(ctypes.c_int)
FICLONE = (1073741824 % 256**sizeof_int) | 37897 | (sizeof_int << 16)
but, even if the above really(?) is a 100% correct Python port of
$ echo FICLONE | cpp -include linux/fs.h | tail -n 1
it still seems more likely that the ctypes package is somehow buggy
somewhere than for Qubes storage to run on an exotic architecture with
non 32 bit ints (in the foreseeable future).
So just document the baked in assumption.
The default (= text) mode for a loop device which contains a VM image
looked weird, even though it didn't make a difference here because the
dev_io object was never actually read from.
When setting global clockvm property, 'clocksync' service is
automatically added to the new value and then removed from the old one.
But if the new value is the same as the old one, the service gets
removed from the just set new value.
Check for this case explicitly.
FixesQubesOS/qubes-issues#4939
'extra' tests run is getting ridiculously long. Allow splitting it into
several jobs. Since this appears as just one class from the test loader
perspective, implement it as environment variables:
- QUBES_TEST_EXTRA_INCLUDE - load just selected tests
- QUBES_TEST_EXTRA_EXCLUDE - skip selected tests (to select "the rest"
tests)
* origin/pr/297:
doc: remove useless _static generated by sphinx
cleanup-dispvms: fix python shebang
spec: fix missing dependency
Fix Sphinx 2 new API for Fedora 31+
doc: Make PEP8 happier
qmemmand: separate SystemState init xc and xs to a 'init' method
doc: drop moved elsewhere components
Only first 4 disks can be emulated as IDE disks by QEMU. Specifically,
CDROM must be one of those first 4 disks, otherwise it will be
ignored. This is especially important if one wants to boot the VM from
that CDROM.
Since xvdd normally is a kernel-related volume (boot image, modules) it
makes perfect sense to re-use it for CDROM. It is either set for kernel
volume (in which case, VM should boot from it and not the CDROM), or
(possibly bootable) CDROM.
This needs to be done in two places:
- BlockExtension for dynamic attach
- libvirt xen.xml - for before-boot attach
In theory the latter would be enough, but it would be quite confusing
that device will get different options depending on when it's attached
(in addition to whether the kernel is set - introduced here).
This all also means, xvdd not always is a "system disk". Adjust listing
connected disks accordingly.
- allow TestQubesDB to be populated with initial data
- support list() method
- allow to register pre-created VM instance (useful for AdminVM, which
don't accept setting qid)
