Since we have proper python package, use it instead of hacky one-file
package. This will ease installation and packaging, including switching
to python3.
GNOME automatically set scaling factor to 2 when HiDPI is detected.
Unfortunately it does it also on not really HiDPI displays, making the
whole UI unusably large. There is no middle ground - scaling factor must
be integer, so 1.5 is not supported. Lets opt on a conservative side and
fallback to scaling factor 1.
Solution by @alyssais, thanks!
FixesQubesOS/qubes-issues#3108
* qubesos/pr/72:
Fix UCA mistake and qvm-actions script
Fix ShellCheck comments
Add debian package support
Disable Thunar thumbnails
Add support for Thunar Qubes VM tools
If IPv6 is configured in the VM, and it is providing network to others,
apply IPv6 firewall similar to the IPv4 one (including NAT for outgoing
traffix), instead of blocking everything. Also, enable IP forwarding for
IPv6 in such a case.
FixesQubesOS/qubes-issues#718
If root filesystem is the last partition (new layout), resize it
in-place. Use 'parted' tool because it can resize just one partition,
without need to specify the whole new partition table. Since the
partition is mounted, parted is unhappy to modify it. Force it by
answering to its interactive prompts, and add (apparently not
documented) ---pretend-input-tty to use those answers even
though stdin is not a tty. Split the operation into multiple parted
calls, for more reliable interactive prompts handling.
Qubes 3.x disk layout (no partition table) is also supported, but the
one that was used in Qubes 4.0 rc1 (root filesystem as the first
partition) is not.
FixesQubesOS/qubes-issues#3173QubesOS/qubes-issues#3143
Default `ask` policy ignore target domain specified by the caller, so it
doesn't make sense to specify one. Provide convenient wrappers not
needing one. Do not change behaviour of existing tools for compatibility
reasons.
FixesQubesOS/qubes-issues#3141
Since some systemd services are moved to other packages, appropriate
%post/%preun should contain the code to enable/disable them.
FixesQubesOS/qubes-issues#2894
clock synchronization mechanism rewritten to use systemd-timesync instead of NtpDate; at the moment, requires:
- modifying /etc/qubes-rpc/policy/qubes.GetDate to redirect GetDate to designated clockvm
- enabling clocksync service in clockvm ( qvm-features clockvm-name service/clocksync true )
Works as specified in issue listed below, except for:
- each VM synces with clockvm after boot and every 6h
- clockvm synces time with the Internet using systemd-timesync
- dom0 synces itself with clockvm every 1h (using cron)
fixesQubesOS/qubes-issues#1230
Instead of calling 'su' to switch the user, use own implementation of
this. Thanks to PAM it's pretty simple. The main reason is to have
control over process waiting for session termination (to call
pam_close_sesion/pam_end). Especially we don't want it to keep std* fds
open, which would prevent qrexec-agent from receiving EOF when one of
them will be closed.
Also, this will preserve QREXEC_AGENT_PID environment variable.
FixesQubesOS/qubes-issues#2851
It isn't really needed. It was used to workaround libusb bug (causing
crash when the system does not have any USB controller), but since we
use HVM now which do have some USB controllers it isn't needed anymore.
Also, it is not available in stock Fedora kernels.
Qubes VM require few config options in grub. Ship appropriate
configuration. Debian have grub.d support, so it can be done cleanly.
On Fedora, /etc/default/grub needs to be modified. Still keep the
options in separate file, but include it manually from
/etc/default/grub.
QubesOS/qubes-issues#2577
- there are many netcat versions (openbsd, nmap, ...), which behave
differently - especially while handling EOF
- Debian jessie doesn't have nmap-ncat (which handle EOFs sufficiently
good)
QubesOS/qubes-issues#1854
While it doesn't make sense to install qubes-core-agent without qrexec,
it may make sense to do the otherway around - install just
qrexec-agent without all the qrexec services and configuration. For
example on some pre-installed system.
QubesOS/qubes-issues#2771
When a file is moved to other package, the new package needs Replaces:
and Breaks: dependecies on old package. Otherwise dpkg will refuse to
change file ownership.
QubesOS/qubes-issues#2771
This will save a lot of dependencies if networking is not needed in VMs
based on given template. Thanks to updates proxy over qrexec, template
itself do not need to have network configured too.
QubesOS/qubes-issues#2771
In Fedora it makes little sense, but in Debian it allows to avoid a lot
of dependencies. So split in both, to keep it simple.
QubesOS/qubes-issues#2771
This is meant to notify dom0 about features supported by just-installed
template. This service is called by dom0 just after template
installation.
FixesQubesOS/qubes-issues#1637
Documentation pending: QubesOS/qubes-issues#2829
Configure package manager to use 127.0.0.1:8082 as proxy instead of
"magic" IP intercepted later. The listen on this port and whenever
new connection arrives, spawn qubes.UpdatesProxy service call (to
default target domain - subject to configuration in dom0) and connect
its stdin/out to the local TCP connection. This part use systemd.socket
unit in case of systemd, and ncat --exec otherwise.
On the other end - in target domain - simply pass stdin/out to updates
proxy (tinyproxy) running locally.
It's important to _not_ configure the same VM to both be updates proxy and
use it. In practice such configuration makes little sense - if VM can
access network (which is required to run updates proxy), package manager
can use it directly. Even if this network access is through some
VPN/Tor. If a single VM would be configured as both proxy provider and
proxy user, connection would loop back to itself. Because of this, proxy
connection redirection (to qrexec service) is disabled when the same VM
also run updates proxy.
FixesQubesOS/qubes-issues#1854
This reverts commit 5dfcf06ef4.
python3-daemon isn't widespread enough yet - for Debian jessie available
only in packports.
In addition to the revert itself, adjust packaging for this change
(mostly for Debian).
This way:
- VM prompt do know VM list, the list may be filtered based on policy
- source VM don't learn name of target VM
FixesQubesOS/qubes-issues#910
glib-compile-schemas recommend naming override files with nn_ prefix,
where nn is a number. Lets use 20, to allow both higher and lower
priority files.
QubesOS/qubes-issues#1108
When /etc/yum.conf is not present (yum-deprecated not installed), don't
try to append to it. It would result in invalid configuration file -
without any section header, and break yum when installed later.
Since 'script' xenstore entry no longer allows passing arguments
(actually this always was a side effect, not intended behaviour), we
need to pass additional parameters some other way. Natural choice for
Qubes-specific script is to use QubesDB.
And since those parameters are passed some other way, it is no longer
necessary to keep it as separate script.
FixesQubesOS/qubes-issues#1143
Up until today, Qubes OS would insist on either masking or disabling
or activating units that should get their state properly changed
but only on first package install (when the template is built).
This commit adds the possibility of having two types of unit presets:
* Initial presets: these are only changed state during first package
installs.
* Upgrade presets: these get their state changed during first
package installs as well as during upgrades.
All the maintainer has to do is abide by the instructions in the
preset file. Nothing else is necessary.
Namely, this allows users to enable SSHD on their templates or
standalone VMs and still keep it enabled even after the
qubes-core-vm-systemd package is upgraded.
Matt really wanted that, and so did I, so now we can do it!
:-)
Do not use a symlink there, as it will be left after NetworkManager
shutdown - as a broken link then
FixesQubesOS/qubes-issues#2320
Reported by Achim Patzner <noses@noses.com>
This rewrite is mainly to adopt new interface for Qubes 4.x.
Main changes:
- change language from bash to python, introduce qubesagent python package
- support both nftables (preferred) and iptables
- new interface (https://qubes-os.org/doc/vm-interface/)
- IPv6 support
- unit tests included
- nftables version support running along with other firewall loaded
FixesQubesOS/qubes-issues#1815QubesOS/qubes-issues#718
The systemctl in Debian unstable fails when trying to disable a removed
service. The manpage do not mention a switch to change this behaviour.
But it says:
Note that this operation creates only the suggested symlinks for
the units. While this command is the recommended way to manipulate
the unit configuration directory, the administrator is free to make
additional changes manually by placing or removing symlinks in the
directory.
So a simple rm should be fine.
This doesn't help when xen update is installed after this one. So, deal
with it in xen %post itself.
This reverts commit f2257e1e3b.
QubesOS/qubes-issues#2141
systemctl preset output lengthy warning when trying to operate on
non-existing unit. This preset action is meant to disable unit, so it's
even better it doesn't exists.
This have many advantages:
- prevent XSS (QubesOS/qubes-issues#1462)
- use default browser instead of default HTML viewer
- better qrexec policy control
- easier to control where are opened files vs URLs
For now allow only http(s):// and ftp:// addresses (especially prevent
file://). But this list can be easily extended.
QubesOS/qubes-issues#1462FixesQubesOS/qubes-issues#1487
xdg-open is more robust in choosing default application for particular
file type: it supports fallback if the preferred application isn't
working, and most importantly it support system-wide defaults
(/usr/share/applications/defaults.list,
/usr/share/applications/mimeapps.list), so no "random" application is
chosen.
By default xdg-open tries to use environment-specific tool, like
gvfs-open - which isn't good for us, because many such tools do not wait
for editor/viewer termination. That would mean that DisposableVM would
be destroyed just after opening the file.
To avoid such effect, we set DE=generic.
FixesQubesOS/qubes-issues#1621
No functional change.
This will make it easier to switch the tool (without recompiling
vm-file-editor), or even use differrent tools depending on some
conditions.
QubesOS/qubes-issues#1621
