When a file is moved to other package, the new package needs Replaces:
and Breaks: dependecies on old package. Otherwise dpkg will refuse to
change file ownership.
QubesOS/qubes-issues#2771
This will save a lot of dependencies if networking is not needed in VMs
based on given template. Thanks to updates proxy over qrexec, template
itself do not need to have network configured too.
QubesOS/qubes-issues#2771
In Fedora it makes little sense, but in Debian it allows to avoid a lot
of dependencies. So split in both, to keep it simple.
QubesOS/qubes-issues#2771
This is meant to notify dom0 about features supported by just-installed
template. This service is called by dom0 just after template
installation.
FixesQubesOS/qubes-issues#1637
Documentation pending: QubesOS/qubes-issues#2829
Configure package manager to use 127.0.0.1:8082 as proxy instead of
"magic" IP intercepted later. The listen on this port and whenever
new connection arrives, spawn qubes.UpdatesProxy service call (to
default target domain - subject to configuration in dom0) and connect
its stdin/out to the local TCP connection. This part use systemd.socket
unit in case of systemd, and ncat --exec otherwise.
On the other end - in target domain - simply pass stdin/out to updates
proxy (tinyproxy) running locally.
It's important to _not_ configure the same VM to both be updates proxy and
use it. In practice such configuration makes little sense - if VM can
access network (which is required to run updates proxy), package manager
can use it directly. Even if this network access is through some
VPN/Tor. If a single VM would be configured as both proxy provider and
proxy user, connection would loop back to itself. Because of this, proxy
connection redirection (to qrexec service) is disabled when the same VM
also run updates proxy.
FixesQubesOS/qubes-issues#1854
This reverts commit 5dfcf06ef4.
python3-daemon isn't widespread enough yet - for Debian jessie available
only in packports.
In addition to the revert itself, adjust packaging for this change
(mostly for Debian).
This way:
- VM prompt do know VM list, the list may be filtered based on policy
- source VM don't learn name of target VM
FixesQubesOS/qubes-issues#910
glib-compile-schemas recommend naming override files with nn_ prefix,
where nn is a number. Lets use 20, to allow both higher and lower
priority files.
QubesOS/qubes-issues#1108
When /etc/yum.conf is not present (yum-deprecated not installed), don't
try to append to it. It would result in invalid configuration file -
without any section header, and break yum when installed later.
Since 'script' xenstore entry no longer allows passing arguments
(actually this always was a side effect, not intended behaviour), we
need to pass additional parameters some other way. Natural choice for
Qubes-specific script is to use QubesDB.
And since those parameters are passed some other way, it is no longer
necessary to keep it as separate script.
FixesQubesOS/qubes-issues#1143
Up until today, Qubes OS would insist on either masking or disabling
or activating units that should get their state properly changed
but only on first package install (when the template is built).
This commit adds the possibility of having two types of unit presets:
* Initial presets: these are only changed state during first package
installs.
* Upgrade presets: these get their state changed during first
package installs as well as during upgrades.
All the maintainer has to do is abide by the instructions in the
preset file. Nothing else is necessary.
Namely, this allows users to enable SSHD on their templates or
standalone VMs and still keep it enabled even after the
qubes-core-vm-systemd package is upgraded.
Matt really wanted that, and so did I, so now we can do it!
:-)
Do not use a symlink there, as it will be left after NetworkManager
shutdown - as a broken link then
FixesQubesOS/qubes-issues#2320
Reported by Achim Patzner <noses@noses.com>
This rewrite is mainly to adopt new interface for Qubes 4.x.
Main changes:
- change language from bash to python, introduce qubesagent python package
- support both nftables (preferred) and iptables
- new interface (https://qubes-os.org/doc/vm-interface/)
- IPv6 support
- unit tests included
- nftables version support running along with other firewall loaded
FixesQubesOS/qubes-issues#1815QubesOS/qubes-issues#718
The systemctl in Debian unstable fails when trying to disable a removed
service. The manpage do not mention a switch to change this behaviour.
But it says:
Note that this operation creates only the suggested symlinks for
the units. While this command is the recommended way to manipulate
the unit configuration directory, the administrator is free to make
additional changes manually by placing or removing symlinks in the
directory.
So a simple rm should be fine.
This doesn't help when xen update is installed after this one. So, deal
with it in xen %post itself.
This reverts commit f2257e1e3b.
QubesOS/qubes-issues#2141
systemctl preset output lengthy warning when trying to operate on
non-existing unit. This preset action is meant to disable unit, so it's
even better it doesn't exists.
This have many advantages:
- prevent XSS (QubesOS/qubes-issues#1462)
- use default browser instead of default HTML viewer
- better qrexec policy control
- easier to control where are opened files vs URLs
For now allow only http(s):// and ftp:// addresses (especially prevent
file://). But this list can be easily extended.
QubesOS/qubes-issues#1462FixesQubesOS/qubes-issues#1487
xdg-open is more robust in choosing default application for particular
file type: it supports fallback if the preferred application isn't
working, and most importantly it support system-wide defaults
(/usr/share/applications/defaults.list,
/usr/share/applications/mimeapps.list), so no "random" application is
chosen.
By default xdg-open tries to use environment-specific tool, like
gvfs-open - which isn't good for us, because many such tools do not wait
for editor/viewer termination. That would mean that DisposableVM would
be destroyed just after opening the file.
To avoid such effect, we set DE=generic.
FixesQubesOS/qubes-issues#1621
No functional change.
This will make it easier to switch the tool (without recompiling
vm-file-editor), or even use differrent tools depending on some
conditions.
QubesOS/qubes-issues#1621
Many USB controllers doesn't play nice with suspend when attached to PV
domain, so unload those drivers by default. This is just a configuration
file, so user is free to change this setting if his/shes particular
controller doesn't have such problem.
FixesQubesOS/qubes-issues#1565
DNF in Fedora 22 uses python2, but in Fedora 23 - python3. Package both
of them, in separate packages (according to Fedora packaging guidelines)
and depend on the right one depending on target distribution version.
FixesQubesOS/qubes-issues#1529
Explicitly block something like "curl http://10.137.255.254:8082" and
return error page in this case. This error page is used in Whonix to
detect if the proxy is torrified. If not blocked, it may happen that
empty response is returned instead of error. See linked ticket for
details.
FixesQubesOS/qubes-issues#1482
Apparently unmanaged devices are loaded only from main
NetworkManager.conf. Exactly the same line pasted (not typed!) to main
NetworkManager.conf works, but in
/etc/NetworkManager/conf.d/30-qubes.conf it doesn't.
BTW There was a typo in option name ("unmanaged_devices" instead of
"unmanaged-devices", but it wasn't the cause).
This reverts commit 6c4831339c.
QubesOS/qubes-issues#1176
Since this proxy is used only when explicitly configured in application
(package manager), there is no point in worrying about user
_erroneously_ using web browser through this proxy. If the user really
want to access the network from some other application he/she can always
alter firewall rules for that.
FixesQubesOS/qubes-issues#1188
Among other things this also fixes build failure - those scripts were
installed but not listed in spec file.
Actual check doesn't perform 'apt-get update', so do that when running
"standalone" (not as a hook from 'apt-get').
QubesOS/qubes-issues#1066
Since /lib/modules is not mounted read-only anymore (only a selected
subdirectory there), it is no longer required to prevent kernel package
installation. Even more - since PV Grub being supported, it makes sense
to have kernel installed in the VM.
QubesOS/qubes-issues#1354
Initramfs created in TemplateVM may be used also in AppVMs based on it, so
technically it is different system. Especially it has different devices
mounted (own /rw, own swap etc), so prevent hardcoding UUIDs here.
QubesOS/qubes-issues#1354
Without dconf, gsettings uses "memory" backend which isn't saved
anywhere and isn't shared across applications. This makes gsettings
pretty useless.
FixesQubesOS/qubes-issues#1299
Do not modify main /etc/NetworkManager/NetworkManager.conf as it would
cause conflicts during updates. Use
/etc/NetworkManager/conf.d/30-qubes.conf instead.
Also remove some dead code for dynamically generated parts (no longer
required to "blacklist" eth0 in VMs - we have proper connection
generated for it). It was commented out for some time already
FixesQubesOS/qubes-issues#1176
Initial size of those tmpfs-mounted directories is calculated as 50% of
RAM at VM startup time. Which happen to be quite small number, like
150M. Having such small /tmp and/or /dev/shm apparently isn't enough for
some applications like Google chrome. So set the size statically at 1GB,
which would be the case for baremetal system with 2GB of RAM.
FixesQubesOS/qubes-issues#1003
Usage of _static_ files (dropins) to override some of autostart entries
(enable/disable them in appropriate VM types) is much simpler and less
error prone than automatic generators.
Handling code is implemented in qubes-session-autostart, which is called
from qubes-session.
qubesos/qubes-issues#1151
Fedora now needs this sudoer rule. Allows sudo to keep the `QT_X11_NO_MITSHM` ENV
variable which prevents MIT-SHM errors for Fedora and Debian when running a QT
application:
`Defaults env_keep += "QT_X11_NO_MITSHM"`
A complementary commit has been made in gui-agent-linux:
Commit: a02e54b71a9ee17f4b10558065a8fc9deaf69984)
Author: Jason Mehring <nrgaway@gmail.com>
Date: Sat Aug 15 20:13:48 2015 -0400
There were multiple problems with reusing existing one:
- need to sync with upstream changes (configuration path etc)
- conflicts resolution on updates
- lack of iptables --wait, which causes firewall fail to load sometimes
QubesOS/qubes-issues#1067
qubes-desktop-file-install is called by qubes-triggers-desktop-file-install. It's
arguments are based on the Gnome desktop-install-file utility to allow it to be replaced
by same. Currently the Gnome utility can not be used since it automatically validates
the .desktop entry files with no option to skip validation and will fail on some third
party .desktop files that are not formed properly.
A single trigger script is shared between Fedora, Debian. This script is used by the
package managers triggers and will copy original .desktop files from `/etc/xdg/autostart`
to `/usr/share/qubes/xdg/autostart` and modify the OnlyShownIn / NotShownIn, etc. The
original .desktop files are left untouched and left in place.
Qubes modifies the XDG_CONFIG_DIRS to first include the `/usr/share/qubes/xdg`
directory (XDG_CONFIG_DIRS=/usr/share/qubes/xdg:/etc/xdg).
If a package gets removed, it's desktop entry is also removed from the /usr/share/qubes/xdg
directory.
'qubes-desktop-file-install' options:
--dir DIR Install desktop files to the DIR directory (default: <FILE>)
--force Force overwrite of existing desktop files (default: False)
--remove-show-in Remove the "OnlyShowIn" and "NotShowIn" entries from the desktop file (default: False)
--remove-key KEY Remove the KEY key from the desktop files, if present
--set-key (KEY VALUE) Set the KEY key to VALUE
--remove-only-show-in ENVIRONMENT Remove ENVIRONMENT from the list of desktop environment where the desktop files should be displayed
--add-only-show-in ENVIRONMENT Add ENVIRONMENT to the list of desktop environment where the desktop files should be displayed
--remove-not-show-in ENVIRONMENT Remove ENVIRONMENT from the list of desktop environment where the desktop files should not be displayed
--add-not-show-in ENVIRONMENT Add ENVIRONMENT to the list of desktop environment where the desktop files should not be displayed
Even when iptables.service is configured to use different file, the
service would not start when there is no /etc/sysconfig/iptables. Fedora
20 package does not provide it.
Instead of overriding /etc/sysconfig/ip{,6}tables, store qubes rules in
/etc/sysconfig/iptables.qubes and configure the service to use that file
instead. This will prevent conflict on that file and also handle upgrades.
A file is created in /var/lib/qubes/protected-files. Scripts can grep this file before modifying
known files to be protected and skip any modifications if the file path is within protected-files.
Usage Example:
if ! grep -q "^/etc/hostname$" "${PROTECTED_FILE_LIST}" 2>/dev/null; then
Also cleaned up maintainer scripts removing unneeded systemd status functions and streamlined
the enable/disable systemd unit files functions
This will probably break some user configuration. Do that only when
installing for the first time (during template build), during upgrade
set only those installed by this package instead of all.
This process should be started from user session (most likely
qubes-session). New processes (of that user) will be created as
children of that session making logind and such crap happy. This should
also solve problems with EOF transmission (no additional "su" process)
and prevent loading all the environment multiple times.
This is to allow permissions to be set on some devices where the user needs
less restrictive permissions. /etc/udev/rules.d/99-qubes-misc.rules changes
a few xen devices to allow the users in the qubes group access
Moved iptables configuration to /usr/lib/qubes/init
fc21 + debian + arch will place them in proper place on postinst
Fixes dedian bug of not having them in proper place