pax-pwn/firmware/tree/usr/share/tm/tm_simplified_chinese.lng

377 lines
11 KiB
Plaintext
Raw Normal View History

# .\download\ini_parser.c
# .\download\download_api.c
"Uploading..." = "上传中..."
"Downloading..." = "下载中..."
"Uninstall" = "卸载"
"Installing..." = "正在安装..."
"No Such File" = "文件不存在"
"Illegal Sig Info" = "签名信息非法"
"Unknown Error!" = "未知错误"
"Invalid Format" = "非法格式"
"Permission Denied" = "无法访问"
"Illegal Parameter" = "非法参数"
"Handle is Invalid" = "非法句柄"
"Parameters Error" = "参数错误"
# .\download\download.c
"Download by TCP" = "TCP下载"
"Input Port" = "输入端口号"
"Port is in Use" = "端口被占用"
"Select COM Port" = "选择串口"
"Downloading..." = "正在下载"
"TCP Port:" = "侦听端口:"
"COM:" = "串口:"
"[Cancel] to exit" = "[取消]键退出"
"Eth Not Connected" = "网络未连接"
"Eth Not Configured" = "网络未配置"
"Network Config" = "网络配置"
"U-Disk Download" = "U盘下载"
"Download Error" = "下载异常中止"
"Request Timeout" = "请求超时"
"Disconnected" = "连接中断"
"Upgrade Failed" = "升级失败"
"Pls Insert U-Disk" = "请插入U盘"
"U-Disk Detected" = "检测到U盘"
"Please Confirm:" = "请确认:"
"Is there system.list?" = "存在system.list?"
"Config File Err" = "配置文件错误"
"Download Finished" = "下载完成"
"Install Failed" = "安装失败"
"No Such User" = "无此用户"
"Total :" = "总计:"
"Failed :" = "失败:"
"Succeeded :" = "成功:"
"COM Port" = "串口"
"USB" = "USB"
"U-Disk" = "U盘"
"TCP/IP" = "网络"
"Download" = "下载"
"Download List" = "下载列表"
"Cancel to exit" = "Cancel键退出"
"Enter to continue" = "Enter键继续"
"or" = "或"
# .\do_xml\parse_xml_config.c
# .\ped\ped_op.c
"Change Pwd" = "修改密码"
"INJECT TLK" = "注入TLK"
"INJECT TRK" = "注入TRK"
"Key Config" = "密钥配置"
"Key Download" = "密钥下载"
"PED" = "PED"
# .\do_ui\menu.c
# .\do_ui\get_string.c
"Invalid Addr" = "非法地址"
"Not enough data" = "位数不足"
# .\do_ui\display.c
"NO -[Cancel]" = "否-[取消]"
"YES-[Enter ]" = "是-[确认]"
"Confirm" = "[确认]"
"[OK]" = "[确认]"
# .\do_ui\color_manage.c
# .\do_ui\lng.c
# .\diagnose\diagnose.c
"Track Error!" = "磁道错误!"
"Magcard Reader" = "磁条卡"
"Please Swipe" = "请刷卡"
"Open Failed" = "打开设备失败"
"Track is OK!" = "磁道正常"
"Detection Error" = "发生异常"
"User Card" = "用户卡"
"Opening the device.." = "正在打开设备"
"Pls Insert Card" = "请插入卡"
"Card Inserted" = "有卡插入"
"Initialization Fail" = "初始化失败"
"Exchanging Data.." = "命令执行中.."
"Exchange Failed" = "命令执行失败"
"Exchange Succeeded" = "命令执行成功"
"Card Test Done" = "卡片测试完成"
"SAM CARD" = "SAM卡"
"SAM Card" = "SAM卡"
"ICC Reader" = "IC卡"
"Detected:" = "检测到:"
"Return Code:" = "返回码:"
"MIFARE 1" = "MIFARE 1"
"MIFARE 1 Card" = "M1卡"
"Set Card Failed" = "设置卡片失败"
"Verify Failed" = "校验失败"
"Verified OK" = "校验成功"
"Block Value:" = "块中数据:"
"A Type Card" = "A卡"
"Type A" = "A卡"
"B Type Card" = "B卡"
"Type B" = "B卡"
"FeliCa" = "FeliCa"
"FeliCa Card" = "FeliCa"
"Cannot Activate" = "卡片无法激活"
"Reading data..." = "正在读取数据"
"Read Failed" = "读取失败"
"Read Succeeded" = "读取成功"
"RF Reader" = "射频卡"
"Card Readers" = "读卡器"
"Synchronous" = "同步"
"Asynchronous" = "异步"
"Modem" = "Modem"
"Data Rate" = "通讯速率"
"Dialing Canceled!" = "拨号被取消!"
"Timeout (sec):" = "超时(秒):"
"Phone Number:" = "电话号码:"
"Dial Attempts:" = "拨号次数:"
"Send Attempts:" = "发送次数:"
"Dialing..." = "正在拨号..."
"Line Busy!" = "线路忙!"
"Disconnected!" = "连接断开!"
"Connected!" = "已连接!"
"Sending data..." = "正在发送数据"
"Data sent!" = "发送成功"
"No Response!" = "没有响应"
"Access Point Name" = "访问点名称"
"Enter Username" = "请输入用户名"
"Enter Password" = "请输入密码"
"Destination IP" = "远端IP"
"Enter Data Length" = "数据长度"
"Mobile Network" = "移动网络"
"Test OK" = "测试完成"
"Ping Timeout!" = "PING超时!"
"Starting Net..." = "正在启动网络"
"Select the Slot Fail" = "通道选择失败"
"Closing Net..." = "正在关闭网络"
"Server IP:" = "服务器IP:"
"Server Port:" = "服务器端口:"
"Subnet Mask:" = "子网掩码:"
"Gateway IP Adrr:" = "网关IP:"
"Local IP Adrr:" = "本地IP:"
"Destination IP:" = "远端IP:"
"Timeout(ms):" = "超时(毫秒):"
"Duration(s):" = "持续时间(秒):"
"Ethernet" = "以太网"
"Testing Ethernet" = "以太网测试"
"PING Times:" = "PING次数:"
"ETH Detection done" = "以太网测试完成"
"Wireless" = "无线网络"
"Communication" = "通讯"
"Printer" = "打印机"
"Printing..." = "正在打印"
"Keyboard" = "键盘"
"Press Any Key" = "请按任意键"
"Key Value:" = "键值:"
"[1]Twice To Exit" = "连按[1]两次退出"
"Speaker" = "扬声器"
"Playing Audio..." = "正在播放音频"
"Detection Done" = "测试完成"
"Speaker Error" = "扬声器异常"
"LCD" = "显示器"
"Touch Screen" = "触摸屏"
"User Interface" = "用户接口"
"Battery" = "电池"
"No Battery" = "没有电池"
"Unsupported" = "不支持"
"Charging..." = "正在充电"
"Discharging" = "正在放电"
"Version:" = "版本:"
"Verifying..." = "正在校验"
"Signed Correctly" = "签名正确"
"Application List" = "应用列表"
"No Application" = "没有应用"
"Application" = "应用"
"Module Test" = "模块检测"
# .\main\hot_plug.c
# .\main\tm.c
"System Report" = "系统报告"
"Ped Reg Attack Report" = "PED触发报告"
"Crash Report" = "Crash报告"
"Upload Exception" = "上传异常中止"
"Upload Finished" = "上传完成"
"System Config" = "系统配置"
"Terminal Info" = "终端信息"
"Security Info" = "安全信息"
"Main Menu" = "主菜单"
"Quit TM?" = "退出TM?"
# .\main\common.c
"No Font File" = "缺少字体文件"
"Printer Busy" = "打印机忙"
"Out of Paper" = "打印机缺纸!"
"Printer Overheat" = "打印机过热!"
"High Voltage" = "高压"
"Print Finished" = "打印完成"
"Print" = "打印"
"Timeout" = "超时"
"Dev Not Available" = "设备不可用"
"Device Occupied" = "设备已被占用"
"Device Not Open" = "设备未打开"
"No Specify Font" = "指定的字体不存在"
"User Cancel" = "用户取消"
"Disconnected" = "未连接"
"Memory Error" = "内存错误"
"Config Error" = "配置失败"
"Screen not Open" = "触摸屏未打开"
"LRC Error" = "LRC校验失败"
"Date Error" = "日期校验失败"
"IP Service Error" = "IP服务异常"
"IP Service Busy" = "IP服务忙"
"Routing Not Set" = "未设置路由"
"Too Many Conns." = "连接太多"
"Unavailable Link" = "链路不可用"
"Disconnected" = "连接断开"
"Password Error" = "密码错误"
"User Disconnect" = "用户断开连接"
"Failed to Get IP" = "未能分配到IP"
"DHCP Not Started" = "DHCP未启动"
"DNS Failure" = "DNS查找失败"
"Port is In Use" = "端口被占用"
"DNS Not Set" = "未配置DNS"
"Server Disconn." = "服务端关闭连接"
"Timeout" = "连接超时"
"PPP Disconnected" = "PPP断开连接"
"No PPPoE Server" = "没有PPPoE服务"
"No Resources" = "资源不存在"
"SIM Requires PIN" = "需要PIN"
"Response Error" = "响应错误"
"No Response" = "没有响应"
"SIM Requires PUK" = "需要PUK"
"PIN Error" = "SIM卡PIN错误"
"No SIM Card" = "未插入SIM卡"
"Cannot Identify" = "无法识别"
# .\sysconfig\sysconfig.c
"Date" = "日期"
"Current Date" = "当前日期"
"Set Failed!" = "设置失败!"
"Try Again?" = "重试?"
"Set successfully" = "设置成功"
"Time" = "时间"
"Current Time" = "当前时间"
"Date&Time" = "日期时间"
"English" = "英语"
"Chinese(Simp)" = "简体中文"
"Chinese(Trad)" = "繁体中文"
"Language" = "系统语言"
"White-black" = "白底黑字"
"Yellow-blue" = "黄底蓝字"
"White-blue" = "白底蓝字"
"White-red" = "白底红字"
"UI Layout" = "配色方案"
"Password" = "密码"
"Enter Old Pwd" = "输入旧密码"
"Pwd Error!" = "密码错误"
"Enter New Pwd" = "输入新密码"
"Re-Enter New Pwd" = "再次输入新密码"
"Not Matching!" = "两次输入不一致"
"It's the old one" = "和旧密码相同"
"System Setting" = "系统设置"
"Enter Password:" = "输入密码:"
"Brightness" = "亮度"
"Volume" = "音量"
"OFF" = "关"
"ON" = "开"
"Keytone" = "按键音"
"Key Backlight" = "按键背光"
"LCD Sleep Time" = "LCD背光时间"
"0-Never" = "0-从不"
"Calibrate Screen" = "触屏校准"
"Media" = "媒体"
"Cant Start DHCP" = "启动DHCP失败"
"DHCP" = "DHCP"
"Getting IP Addr" = "正在获取IP"
"Config Finished" = "配置完成"
"Config Failed" = "配置失败"
"Static" = "静态"
"Configuring..." = "正在配置"
"IP Address" = "IP地址"
"Old IP Address:" = "旧IP:"
"New IP Address:" = "新IP:"
"Netmask" = "掩码"
"Old Netmask:" = "旧掩码:"
"New Netmask:" = "新掩码:"
"Gateway" = "网关"
"Old Gateway:" = "旧网关:"
"New Gateway:" = "新网关:"
"Primary DNS" = "主DNS"
"Old DNS:" = "旧DNS:"
"New DNS:" = "新DNS:"
"Secondary DNS" = "从DNS"
"Subnet Mask" = "子网掩码"
"Auto" = "自动"
"10M Half-Duplex" = "10M半双工"
"10M Full-Duplex" = "10M全双工"
"100M Half-Duplex" = "100M半双工"
"100M Full-Duplex" = "100M全双工"
"Transfer Rate" = "传输速率"
"Current" = "当前状态"
"Open" = "开"
"1.Close" = "1.关"
"Signal Strength:" = "信号强度:"
"Close" = "关"
"1.Open" = "1.开"
"Switch SIM Slot" = "切换SIM卡槽"
"SIM Slot" = "SIM卡槽"
"SLOT1" = "卡槽1"
"SLOT2" = "卡槽2"
"Card Slot Options" = "卡槽选项"
"APN" = "APN"
"APN Username" = "APN用户名"
"APN Password" = "APN密码"
"Old APN:" = "旧APN:"
"New APN:" = "新APN:"
"Old APN Username:" = "旧用户名:"
"New APN Username:" = "新用户名:"
"Old APN Password" = "旧密码:"
"New APN Password" = "新密码:"
"SIM Card Pwd" = "SIM卡密码"
"Enter SIM Pwd:" = "输入SIM卡密码"
"Switch" = "开关"
"Network Mode" = "网络模式"
"Hybrid Mode" = "混合模式"
"CDMA Mode" = "CDMA模式"
"Reset Config" = "还原出厂设置"
"Restore?" = "重置?"
"Sync-mode Mount" = "同步挂载"
"Async-mode Mount" = "异步挂载"
"Mount Parameters" = "挂载参数"
"G6x0 Update" = "G6x0 升级"
"Firmware Update" = "模块升级"
"Show Config" = "显示配置"
"Remote Load" = "远程下载"
# .\sysinfo\sysinfo.c
"SVN Info" = "SVN信息"
"System Info" = "系统信息"
"U-Disk Load" = "U盘下载"
"XCB Service" = "下载调试服务"
"Close Service" = "关闭服务"
"COM Console" = "串口控制台"
"Release Version" = "商用版本"
"Unsupported!" = "不支持控制台!"
"Network" = "网络"
"Network Config" = "网络配置"
"Close Console," = "请先关闭控制台,"
"Reboot & Retry" = "然后重启再试"
"Signal is weak!" = "信号太弱"
"Switch" = "开关"
"Initializing..." = "正在初始化..."
"Cannot Load Lib" = "加载动态库失败"
"Undefined Symbol" = "符号未定义"
"Error!" = "应用错误"
"Segfault" = "段错误"
"[ENTER] start TM" = "按确认键进入TM"
"MAINAPP" = "主应用"
"Verify Error" = "校验失败"
"Screen Saver"="屏保时间"
"Sleep Time"="休眠时间"
"Sleep Delay"="休眠等待时间"
"Power Saving"="电源管理"
"Dim Screen After"="当前时间"
"Sleep After"="当前时间"
"Fall Asleep After"="当前时间"