Additional system information

Readme.md

@@ -320,4 +320,42 @@ Enter 'help' for a list of built-in commands.
 
 /data/app/MAINAPP # id
 uid=0(root) gid=999(MAINAPP) egid=0(root) groups=1(system),2(hwdev),999(MAINAPP),999(MAINAPP)
-```
+```
+
+## System Analysis
+The bootloader is U-Boot.
+
+This is the partition scheme:
+```
+dev:    size   erasesize  name
+mtd0: 000c0000 00020000 "boot"			<- U-Boot image
+mtd1: 00080000 00020000 "nvram_fac"		<- U-Boot environment
+mtd2: 000c0000 00020000 "boot_res"		<- Boot resources, ie: boot logo
+mtd3: 00400000 00020000 "kernel"		<- kernel binary
+mtd4: 00600000 00020000 "ramdisk"		<- ramdisk containit init and kernel modules 
+mtd5: 00600000 00020000 "base"			<- base system, including binaries and libraries
+mtd6: 06e00000 00020000 "data"			<- user data, application executables, library and assets
+```
+
+The file [init.rc](https://git.lsd.cat/g/pax-pwn/src/master/firmware/tree/startup/init.rc) gives an idea on how the system is started and how different debug levels are handled.
+
+`/usr/bin/tm` is the binary responsible for the GUI management. The system password is AES encrypted and is stored in a user readable property:
+
+
+
+A lot of interesting functions are done trough kernel modules, [available here](https://git.lsd.cat/g/pax-pwn/src/master/firmware/tree/startup/modules).
+
+Hardware driver are implemented via a low level kernel module and a higher level abastraction module, and are available via the `libosal.so` library.
+In the case of this hardware revision of the S900, For the RFID reader:
+
+```
+pcd_rc663.ko 	-> Hardware driver
+pcd_base.ko 	-> Middleware, creates
+libosal.so 		-> Shared library, provides the OsPicc* functions trough interacting with /dev/pcd
+```
+
+For the magnetic stripe reader the family of functions is `OSMsr*` that uses the `/dev/msr` device and for SmartCards there are the `OsIcc*` functions that use the `/dev/usercard` device.
+
+
+
+The graphic interface library is `libxui.so`.