pax-pwn/firmware/tree/startup/init.D200_M13_P13_WIFI.rc

#The hardware of M13_P13_WIFI is same as M12_P12_WIFI, only the structure is different.
on early-boot
	chmod 755 /usr/bin/wpa_supplicant
	
on early-init
	insmod /startup/modules/bcm5892-rtc.ko
	start ueventd

on init
	insmod /startup/modules/devices_base.ko
	insmod /startup/modules/pm_bcm5892.ko	
	insmod /startup/modules/D200_M12_P12_WIFI.ko	
	insmod /startup/modules/ioconfig.ko
	write /sys/class/backlight/pwm-backlight/brightness  255
    setprop ro.security_version 13.03.00

#USB support
	insmod /startup/modules/bcm589x-dwccom.ko
	insmod /startup/modules/bcm589x-otg.ko
	insmod /startup/modules/tty-devices.ko
	insmod /startup/modules/tty-host.ko
	
#base drivers	
	insmod /startup/modules/misc.ko
	#enable i2c1 adapter for pmu
	write /sys/devices/:amba:i2c1/enabled 1
	insmod /startup/modules/pmu_rn5t614x.ko 	
	#i2c-GPIO driver for touch key
	insmod /startup/modules/i2c-gpio.ko	
	insmod /startup/modules/input_base.ko power_key=116 press_time=2
	#touch_key driver 	
	insmod /startup/modules/touch_key_cy8c20436a.ko

#card drivers (sci msr pcd)
	insmod /startup/modules/sci_bcm5892_tda8026.ko
	insmod /startup/modules/msr.ko
	insmod /startup/modules/pcd_base.ko
	insmod /startup/modules/pcd_as3911.ko

#security drivers (bbl, sec, verify)
	insmod /startup/modules/bcm5892_bbl.ko
	insmod /startup/modules/bcm589x-sec.ko
	insmod /startup/modules/verify.ko
	
#log server driver
	insmod /startup/modules/logger.ko
	
#switch wifi power.NOTE¡êothis position must before the 	WIFI driver and after the PUM driver!  
	write /sys/devices/platform/misc/wifi/power 1
	
#wifi	
	if property:ro.fac.wifi!= insmod /startup/modules/rsi_client.ko
	if property:ro.fac.wifi!= insmod /startup/modules/rsi_master.ko firmware_path=/startup/firmware/redpine/ sdio_clock=20 driver_mode=1 eeprom_address_type=0 txiq_feature=0	
	
	chmod 666 /sys/power/state
	chmod 666 /sys/class/backlight/pwm-backlight/brightness
	chmod 666 /sys/devices/platform/keypad/backlight_on

	chmod 666 /sys/devices/platform/keypad/buzzer_user_duration
	chown root hwdev /sys/devices/platform/keypad/buzzer_user_duration
	chmod 666 /sys/devices/platform/keypad/buzzer_user_freq
	chown root hwdev /sys/devices/platform/keypad/buzzer_user_freq
	chmod 222 /sys/devices/platform/keypad/buzzer_user_trigger
	chown root hwdev /sys/devices/platform/keypad/buzzer_user_trigger
	chmod 666 /sys/devices/platform/keypad/buzzer_user_volume
	chown root hwdev /sys/devices/platform/keypad/buzzer_user_volume
	chmod 222 /sys/devices/platform/keypad/buzzer_user_stop
	chown root hwdev /sys/devices/platform/keypad/buzzer_user_stop

	chmod 660 /sys/devices/platform/keypad/buzzer_keypad_duration
	chown root MAINAPP /sys/devices/platform/keypad/buzzer_keypad_duration
	chmod 660 /sys/devices/platform/keypad/buzzer_keypad_freq
	chown root MAINAPP /sys/devices/platform/keypad/buzzer_keypad_freq
	chmod 666 /sys/devices/platform/keypad/buzzer_keypad_enable
	chown root MAINAPP /sys/devices/platform/keypad/buzzer_keypad_enable
	chmod 660 /sys/devices/platform/keypad/buzzer_keypad_volume
	chown root MAINAPP /sys/devices/platform/keypad/buzzer_keypad_volume

	#key_value of back_light
	setprop ro.backlightkey 116
	
	#time of back light auto active, unit:Second           
	setprop persist.sys.backlighttime 60
	
	setprop persist.sys.sleeptime 0
	setprop persist.sys.sleepwaittime 1

# usb et/hernet driver
	insmod /startup/modules/asix.ko
	
# create some symlinks
	if property:ro.fac.bt!= symlink /dev/ttyAMA1 /dev/ttybt
	symlink /dev/input/event0 /dev/keypad
	symlink /dev/input/event1 /dev/keypad_ped
	symlink /dev/graphics/fb0 /dev/fb
	symlink /dev/graphics/fb1 /dev/fb_ped

on post-fs
#LCD driver
	symlink /startup/firmware/lcd_320x240.rle /startup/firmware/lcd.watermark
	write /sys/class/backlight/pwm-backlight/brightness  0
	insmod /startup/modules/lcd_fb.ko
	insmod /startup/modules/lcd_hw_smc.ko
	if property:ro.fac.videocard=TM023KDZ32 insmod /startup/modules/lcd_panel_TM023KDZ32.ko
	if property:ro.fac.videocard=LCD_01 insmod /startup/modules/lcd_panel_LCD_01.ko	
	if property:ro.fac.videocard=01 insmod /startup/modules/lcd_panel_LCD_01.ko
	
on boot
	if property:ro.fac.wifi!= start wpa_supplicant
	
service servicemanager /usr/bin/servicemanager
	class core
	user root
	group root
	critical
	onrestart restart systemservice
	onrestart restart ipservice
	
service wpa_supplicant /usr/bin/logwrapper /usr/bin/wpa_supplicant -iwlan0 -Drsi -c /startup/wifi_settings.cfg 
	disabled
	user root
	group root
	
service usbwifi /usr/bin/wpa_supplicant_ap6181 -Dwext -iwlan0 -c /startup/wifi_settings.cfg
	disabled
	user root
	group root

service ipservice /usr/bin/ipservice
	disabled
	user root
	group root

service pedd /usr/bin/pedd
	user root
	group root


service keyman /usr/bin/keyman
	disabled
	user root
	group root

service xcb /usr/bin/xcbd
	disabled
	user MAINAPP
	group MAINAPP


service crashd /usr/bin/crashd
	user MAINAPP
	group MAINAPP

service systemservice /usr/bin/systemservice
	user root 
	group root 
		
on property:persist.sys.ipservice.enable=1
	start ipservice

on property:persist.sys.ipservice.enable=0
	stop ipservice

on property:persist.sys.xcb.enable=1
	start xcb

on property:persist.sys.xcb.enable=0
	stop xcb