Do not check for accepted value only in constructor, do that in property
setter. This will allow enforcing the limit regardless of how the value
was set.
This is preparation for dynamic revisions_to_keep change.
QubesOS/qubes-issues#3256
- make it clear that failed qubes.ResizeDisk service call means the need
to resize filesystem manually (but not necessarily the volume itself)
- propagate exceptions raised by async storage pool implementations
Related QubesOS/qubes-issues#3173
* bug3164:
tests: add regression test for #3164
storage/lvm: make sure volume cache is refreshed after changes
storage/lvm: fix Volume.verify()
storage/lvm: remove old volume only after successfully cloning new one
In some cases, it may happen that new volume (`self._vid_snap`) does not
exists. This is normally an error, but even in such a case, do not
remove the only remaining instance of volume (`self.vid`). Instead,
rename it temporarily and remove only after new volume is successfully
cloned.
FixesQubesOS/qubes-issues#3164
This applies to qvm-template-postprocess, which at the beginning try to
resize root volume to appropriate size. It makes more sense to silently
succeed here, instead of forcing every client-side utility to check if
the volume have already desired size.
On certain locales (e.g. danish) `usage_percent` will output a comma-separated number, which will make `attr` point the last two decimal points, s.t. `return vol_info['attr'][4] == 'a'` (in the `verify` func) will fail and `qubesd` wont run.
First, cache objects created with init_volume - this is the only place
where we have full volume configuration (including snap_on_start and
save_on_stop properties).
But also implement get_volume method, to get a volume instance for given
volume id. Such volume instance may be incomplete (other attributes are
available only in owning domain configuration), but it will be enough
for basic operations - like cheching and changing its size, cloning
etc.
Listing volumes still use list of physically present volumes.
This makes it possible to start qubesd service, without physical
presence of some storage devices. Starting VMs using such storage would
still fail, of course.
FixesQubesOS/qubes-issues#2960
* tests-storage:
tests: register libvirt events
tests: even more agressive cleanup in tearDown
app: do not wrap libvirt_conn.close() in auto-reconnect wrapper
api: keep track of established connections
tests: drop VM cleanup from tearDownClass, fix asyncio usage in tearDown
storage: fix Storage.clone and Storage.clone_volume
tests: more tests fixes
firewall: raise ValueError on invalid hostname in dsthost=
qmemman: don't load qubes.xml
tests: fix AdminVM test
tests: create temporary files in /tmp
tests: remove renaming test - it isn't supported anymore
tests: various fixes for storage tests
tests: fix removing LVM volumes
tests: fix asyncio usage in some tests
tests: minor fixes to api/admin tests
storage/file: create -cow.img only when needed
storage: move volume_config['source'] filling to one place
app: do not create 'default' storage pool
app: add missing setters for default_pool* global properties
* qdb-watch:
tests: add qdb_watch test
ext/block: make use of QubesDB watch
vm: add API for watching changes in QubesDB
vm: optimize imports
api/admin: don't send internal events in admin.Events
Add explanation why admin.vm.volume.Import is a custom script
Follow change of qubesdb path return type
Rename vm.qdb to vm.untrusted_qdb
Don't set 'source' volume in various places (each VM class constructor
etc), do it as part of volume initialization. And when it needs to be
re-calculated, call storage.init_volume again.
This code was duplicated, and as usual in such a case, those copies
were different - one have set 'size', the other one not.
QubesOS/qubes-issues#2256
Since we have app.default_pool* properties, create appropriately named
pool and let those properties choose the right pool. This also means we
don't need to specify pool name in default volume config anymore
QubesOS/qubes-issues#2256
Specify empty 'source' field, so it gets filled with appropriate
template's images. Then also fix recursive 'source' handling - DispVM
root volume should point at TemplateVM's root volume as a source, not a
AppVM's one - which is also only a snapshot.
FixesQubesOS/qubes-issues#2896
LinuxKernel pool support only read-only volumes, so save_on_stop=True
doesn't make sense. Make it more explicit - raise NotImplementedError
otherwise.
Also, migrate old configs where snap_on_start=True, but no source was
given.
QubesOS/qubes-issues#2256
This driver isn't used in default Qubes 4.0 installation, but if we do
have it, let it follow defined API and its own documentation. And also
explicitly reject not supported operations:
- support only revisions_to_keep<=1, but do not support revert() anyway
(implemented version were wrong on so many levels...)
- use 'save_on_stop'/'snap_on_start' properties directly instead of
obsolete volume types
- don't call sudo - qubesd is running as root
- consistently use path, path_cow, path_source, path_source_cow
Also, add tests for BlockDevice instance returned by
FileVolume.block_device().
QubesOS/qubes-issues#2256
Do not always use pool named 'default'. Instead, have global
`default_pool` property to specify default storage pools.
Additionally add `default_pool_*` properties for each VM property, so
those can be set separately.
QubesOS/qubes-issues#2256
commit/recover/reset should really be handled in start/stop. Nothing
stops specific pool implementation to define such functions privately.
QubesOS/qubes-issues#2256
Always define those properties, always include them in volume config.
Also simplify overriding pool based on volume type defined by those:
override pool unless snap_on_start=True.
QubesOS/qubes-issues#2256
Add convenient collection wrapper for easier getting selected volume.
Storage pool implementation may still provide only volume listing
function (pool.list_volumes), or, additionally, optimized
pool.get_volume.
This means it is both possible to iterate over volumes:
```python
for volume in pool.volumes:
...
```
And get a single volume:
```python
volume = pool.volumes[vid]
```
QubesOS/qubes-issues#2256
Reference objects, not their IDs - this way when object is modified, it
is visible everywhere where it is used. Main changes:
- volume.pool - Pool object
- volume.source - Volume object
Since volume have Pool object reference now, move volume related
functions into Volume class (from Pool class). This avoids horrible
`storage.get_pool(volume).something(volume)` construct.
One issue here is since volume.source reference a Volume object from a
different VM - VM's template, now VM load order is important. Since we
don't have control over it, initialize vm.storage when needed - possibly
while initializing storage of different VM. Since we don't have cycles
in AppVM-TemplateVM dependencies, it is safe.
Also, since this commit, volume.source (if defined) always points at
volume of the same name from VM's template. Using volumes with something
else as a source is no longer supported.
QubesOS/qubes-issues#2256
When VM is renamed only volume.vid get updated, but not other attributes
calculated from it. Convert them to dynamic properties to not worry
about it.
QubesOS/qubes-issues#2256
vm.kernel property have type 'str'. Putting None there makes a lot of
troubles: it gets encoded as 'None' in qubes.xml and then loaded back as
'None' string, not None value. Also it isn't possible to assign None
value to str property throgh Admin API.
kernel='' is equally good to specify "no kernel from dom0".
QubesOS/qubes-issues#2622
Implement this in two parts:
1. Permissions checks, getting a path from appropriate storage pool
2. Actual data import
The first part is done by qubesd in a standard way, but then, instead of
accepting all the data (which may be several GB), return a path to which
a shell script (in practice: `dd` command) will write the data.
Then the script call back to qubesd again to report success/failure and
qubesd response from that call is actually returned to the user.
This way we do not pass all the data through qubesd, but still can
control the process from there in a meaningful way. Note that the last
part (second call to qubesd) may perform all kind of verification (like
a signature check on the data, or so) and can also prevent VM from
starting (hooking also domain-pre-start event) from not verified image.
QubesOS/qubes-issues#2622
Allow importing not only from another volume, but also raw data. In
practice, for all currently implemented storage pools, this is the same
as Pool.export, because path returned there is read-write. But lets not
abuse this fact, some future implementation may need different methods.
QubesOS/qubes-issues#2622QubesOS/qubes-issues#2256
Do not initialize it only at qubes.xml load time, but re-read vm.kernel
property each time the path is constructed. While at it, add support for
vm.kernel set to 'None' - simply don't include modules.img (xvdd) then.
Keep it uniform - QubesVM() object is responsible for handling
vm.dir_path, Storage() is responsible for handling disk volumes (which
may live in that directory
QubesOS/qubes-issues#2256
Allow specific pool implementation to provide asynchronous
implementation. vm.storage.* methods will detect if given implementation
is synchronous or asynchronous and will act accordingly.
Then it's up to pool implementation how asynchronous should be achieved.
Do not force it using threads (`run_in_executor()`). But pool
implementation is free to use threads, if consider it safe in a
particular case.
This commit does not touch any pool implementation - all of them are
still synchronous.
QubesOS/qubes-issues#2256
Use the right cow image and apply the second layer to provide read-write
access. The correct setup is:
- base image + base cow -> read-only snapshot (base changes "cached"
until committed)
- read-only snapshot + VM cow -> read-write snapshot (changes discarded
after VM shutdown)
This way, even VM without Qubes-specific startup scripts will can
benefit from Template VMs, while VMs with Qubes-specific startup scripts
may still see original root.img content (for possible signature
verification, when storage domain got implemented).
QubesOS/qubes-issues#2256
In case of LVM (at least), "internal" flag is initialized only when
listing volume attached to given VM, but not when listing them from the
pool. This looks like a limitation (bug?) of pool driver, it looks like
much nicer fix is to handle the flag in qvm-block tool (which list VMs
volumes anyway), than in LVM storage pool driver (which would need to
keep second copy of volumes list - just like file driver).
QubesOS/qubes-issues#2256
There are mutiple cases when snapshots are inconsistently created, for
example:
- "-back" snapshot created from the "new" data, instead of old one
- "-snap" created even when volume.snap_on_start=False
- probably more
Fix this by following volume.snap_on_start and volume.save_on_stop
directly, instead of using abstraction of old volume types.
QubesOS/qubes-issues#2256
Just calling pool.init_volume isn't enough - a lot of code depends on
additional data loaded into vm.storage object. Provide a convenient
wrapper for this.
At the same time, fix loading extra volumes from qubes.xml - don't fail
on volume not mentioned in initial vm.volume_config.
QubesOS/qubes-issues#2256
- add missing lvm remove call when commiting changes
- delay creating volatile image until domain startup (it will be created
then anyway)
- reset cache only when really changed anything
- attach VM to the volume (snapshot) created for its runtime - to not
expose changes (for example in root volume) to child VMs until
shutdown
QubesOS/qubes-issues#2412QubesOS/qubes-issues#2256
The wrapper doesn't do anything else than translating command
parameters, but it's load time is significant (because of python imports
mostly). Since we can't use python lvm API from non-root user anyway,
lets drop the wrapper and call `lvm` directly (or through sudo when
necessary).
This makes VM startup much faster - storage preparation is down from
over 10s to about 3s.
QubesOS/qubes-issues#2256
...instead of manual copy in python. DD is much faster and when used
with `conv=sparse` it will correctly preserve sparse image.
QubesOS/qubes-issues#2256
1. Add a helper function on vm.storage. This is equivalent of:
vm.storage.get_pool(vm.volumes[name]).export(vm.volumes[name])
2. Make sure the path returned by `export` on LVM volume is accessible.
* core3-devices:
Fix core2migration and tests for new devices API
tests: more qubes.devices tests
qubes/ext/pci: implement pci-no-strict-reset/BDF feature
qubes/tools: allow calling qvm-device as qvm-devclass (like qvm-pci)
qubes: make pylint happy
qubes/tools: add qvm-device tool (and tests)
tests: load qubes.tests.tools.qvm_ls
tests: PCI devices tests
tests: add context manager to catch stdout
qubes/ext/pci: move PCI devices handling to an extension
qubes/devices: use more detailed exceptions than just KeyError
qubes/devices: allow non-persistent attach
qubes/storage: misc fixes for VM-exposed block devices handling
qubes: new devices API
FixesQubesOS/qubes-issues#2257
Add 'backenddomain' element when source (not target) domain is not dom0.
Fix XML elemenet name. Actually set volume.domain when listing
VM-exposed devices.
QubesOS/qubes-issues#2256
