This also means we don't check if a VM with given name (in case of
VMProperty) exists in the system, at this stage. But this is ok, lets
not duplicate work of property setter.
QubesOS/qubes-issues#2622
If kwargs contains dict as one of values, it isn't hashable and can't be
used as value in frozenset/tuple. Convert such values into
frozenset(dict.items()). Only one (more) level is supported, but it
should be enough.
Solution from http://stackoverflow.com/a/13264725
In theory any call could modify config (through events), but lets keep
writes to qubes.xml low. In any case, qubes.xml will be eventually
written (either at next config-modifying call, or daemon exit).
Sanitization of input value is tricky here, and also very important at
the same time. If property define value type (and it's something more
specific than 'str'), use that. Otherwise allow only printable ASCII
characters, and let appropriate event and setter handle value.
At this point I've reviewed all QubesVM properties in this category and
added appropriate setters where needed.
QubesOS/qubes-issues#2622
Don't allow characters potentially interfering with qrexec. To be on the
safe side, allow only alphanumeric characters + very few selected
punctuations.
Split it into two functions: validate_name - context-less verification,
and actual _setter_name which perform additional verification in
context of actual VM.
Switch to qubes.exc.* exceptions where appropriate.
This reverts commit 0f1672dc63.
Bring it back. Lets not revert the whole feature just because required
package exists only in qubes-builder, not in some online repository.
Also, this revert didn't go as planned - there was a reference to a
'passphrase' local variable, but it wasn't assigned any value.
Cc: @woju
This will allow more flexible API usage, especially when using mgmt API
- we need to use VM type as string there.
We don't lose any flexibility here - VM class names needs to be uniquely
identified by a string (used in qubes.xml) anyway.
Use the right cow image and apply the second layer to provide read-write
access. The correct setup is:
- base image + base cow -> read-only snapshot (base changes "cached"
until committed)
- read-only snapshot + VM cow -> read-write snapshot (changes discarded
after VM shutdown)
This way, even VM without Qubes-specific startup scripts will can
benefit from Template VMs, while VMs with Qubes-specific startup scripts
may still see original root.img content (for possible signature
verification, when storage domain got implemented).
QubesOS/qubes-issues#2256
QubesDB daemon no longer remove socket created by new instance, so one
part of VM restart race condition is solved. The only remaining part is
to ensure that we really connect to the new instance, instead of talking
to the old one (soon to be terminated).
FixesQubesOS/qubes-issues#1694
None of properties set there do any "dangerous thing" for filesystem
permissions (at least for now), so do not require it. This is mostly to
keep compatibility with %post rpm scripts (kernel-qubes-vm at least).
QubesOS/qubes-issues#2412
This tool by design is called as root, so try to:
- switch to normal user if possible
- fix file permissions afterwards - if not
QubesOS/qubes-issues#2412
There was a comment '# Set later', but actually values were never set.
This break adding just installed template (qvm-template-postprocess).
QubesOS/qubes-issues#2412
When system is installed with LVM thin pool, it should be used by
default. But lets keep file-based on for /var/lib/qubes for some corner
cases, migration etc.
QubesOS/qubes-issues#2412
This is intended to call to finish template installation/removal.
Template RPM package is basically container for root.img, nothing more.
Other parts needs to be generated after root.img extraction. Previously
it was open coded in rpm post-install script, but lets keep it as qvm
tool to ease supporting multiple version in template builder
QubesOS/qubes-issues#2412
VM files may be already removed. Don't fail on this while removing a
VM, it's probably the reason why domain is being removed.
qvm-remove tool have its own guard for this, but it isn't enough - if
rmtree(dir_path) fails, storage.remove() would not be called, so
non-file storages would not be cleaned up.
This is also needed to correctly handle template reinstallation - where
VM directory is moved away to call create_on_disk again.
QubesOS/qubes-issues#2412
'-' is invalid character in python identifier, so all the properties
have '_'. But in previous versions qvm-* tools accepted names with '-',
so lets not break this.
QubesOS/qubes-issues#2412
/var/log/qubes directory have setgid set, so all the files will be owned
by qubes group (that's ok), but there is no enforcement of creating it
group writable, which undermine group ownership (logs created by root
would not be writable by normal user)
QubesOS/qubes-issues#2412
In case of LVM (at least), "internal" flag is initialized only when
listing volume attached to given VM, but not when listing them from the
pool. This looks like a limitation (bug?) of pool driver, it looks like
much nicer fix is to handle the flag in qvm-block tool (which list VMs
volumes anyway), than in LVM storage pool driver (which would need to
keep second copy of volumes list - just like file driver).
QubesOS/qubes-issues#2256
There are mutiple cases when snapshots are inconsistently created, for
example:
- "-back" snapshot created from the "new" data, instead of old one
- "-snap" created even when volume.snap_on_start=False
- probably more
Fix this by following volume.snap_on_start and volume.save_on_stop
directly, instead of using abstraction of old volume types.
QubesOS/qubes-issues#2256
Just calling pool.init_volume isn't enough - a lot of code depends on
additional data loaded into vm.storage object. Provide a convenient
wrapper for this.
At the same time, fix loading extra volumes from qubes.xml - don't fail
on volume not mentioned in initial vm.volume_config.
QubesOS/qubes-issues#2256
- add missing lvm remove call when commiting changes
- delay creating volatile image until domain startup (it will be created
then anyway)
- reset cache only when really changed anything
- attach VM to the volume (snapshot) created for its runtime - to not
expose changes (for example in root volume) to child VMs until
shutdown
QubesOS/qubes-issues#2412QubesOS/qubes-issues#2256
The wrapper doesn't do anything else than translating command
parameters, but it's load time is significant (because of python imports
mostly). Since we can't use python lvm API from non-root user anyway,
lets drop the wrapper and call `lvm` directly (or through sudo when
necessary).
This makes VM startup much faster - storage preparation is down from
over 10s to about 3s.
QubesOS/qubes-issues#2256
...instead of manual copy in python. DD is much faster and when used
with `conv=sparse` it will correctly preserve sparse image.
QubesOS/qubes-issues#2256
Set parameters for possibly hiding domain's real IP before attaching
network to it, otherwise we'll have race condition with vif-route-qubes
script.
QubesOS/qubes-issues#1143
This is the IP known to the domain itself and downstream domains. It may
be a different one than seen be its upstream domain.
Related to QubesOS/qubes-issues#1143`
This helps hiding VM IP for anonymous VMs (Whonix) even when some
application leak it. VM will know only some fake IP, which should be set
to something as common as possible.
The feature is mostly implemented at (Proxy)VM side using NAT in
separate network namespace. Core here is only passing arguments to it.
It is designed the way that multiple VMs can use the same IP and still
do not interfere with each other. Even more: it is possible to address
each of them (using their "native" IP), even when multiple of them share
the same "fake" IP.
Original approach (marmarek/old-qubes-core-admin#2) used network script
arguments by appending them to script name, but libxl in Xen >= 4.6
fixed that side effect and it isn't possible anymore. So use QubesDB
instead.
From user POV, this adds 3 "features":
- net/fake-ip - IP address visible in the VM
- net/fake-gateway - default gateway in the VM
- net/fake-netmask - network mask
The feature is enabled if net/fake-ip is set (to some IP address) and is
different than VM native IP. All of those "features" can be set on
template, to affect all of VMs.
Firewall rules etc in (Proxy)VM should still be applied to VM "native"
IP.
FixesQubesOS/qubes-issues#1143
Core3 keep information whether property have default value for all the
properties (not only few like netvm or kernel). Try to use this feature
as much as possible.
When user included/excluded some VMs for restoration, it may be
neceesarry to fix dependencies between them (for example when default
template is no longer going to be restored).
Also fix handling conflicting names.
Now, when file name is also integrity protected (prefixed to the
passphrase), we can make sure that input files are given in the same
order. And are parts of the same VM.
QubesOS/qubes-issues#971
This prevent switching parts of backup of the same VM between different
backups made by the same user (or actually: with the same passphrase).
QubesOS/qubes-issues#971
`openssl dgst` and `openssl enc` used previously poorly handle key
stretching - in case of `openssl enc` encryption key is derived using
single MD5 iteration, without even any salt. This hardly prevent
brute force or even rainbow tables attacks. To make things worse, the
same key is used for encryption and integrity protection which ease
brute force even further.
All this is still about brute force attacks, so when using long, high
entropy passphrase, it should be still relatively safe. But lets do
better.
According to discussion in QubesOS/qubes-issues#971, scrypt algorithm is
a good choice for key stretching (it isn't the best of all existing, but
a good one and widely adopted). At the same time, lets switch away from
`openssl` tool, as it is very limited and apparently not designed for
production use. Use `scrypt` tool, which is very simple and does exactly
what we need - encrypt the data and integrity protect it. Its archive
format have own (simple) header with data required by the `scrypt`
algorithm, including salt. Internally data is encrypted with AES256-CTR
and integrity protected with HMAC-SHA256. For details see:
https://github.com/tarsnap/scrypt/blob/master/FORMAT
This means change of backup format. Mainly:
1. HMAC is stored in scrypt header, so don't use separate file for it.
Instead have data in files with `.enc` extension.
2. For compatibility leave `backup-header` and `backup-header.hmac`. But
`backup-header.hmac` is really scrypt-encrypted version of `backup-header`.
3. For each file, prepend its identifier to the passphrase, to
authenticate filename itself too. Having this we can guard against
reordering archive files within a single backup and across backups. This
identifier is built as:
backup ID (from backup-header)!filename!
For backup-header itself, there is no backup ID (just 'backup-header!').
FixesQubesOS/qubes-issues#971
Have a generic function `handle_streams`, instead of
`wait_backup_feedback` with open coded process names and manual
iteration over them.
No functional change, besides minor logging change.
Use just introduced tar writer to archive content of LVM volumes (or
more generally: block devices). Place them as 'private.img' and
'root.img' files in the backup - just like in old format. This require
support for replacing file name in tar header - another thing trivially
supported with tar writer.
tar can't write archive with _contents_ of block device. We need this to
backup LVM-based disk images. To avoid dumping image to a file first,
create a simple tar archiver just for this purpose.
Python is not the fastest possible technology, it's 3 times slower than
equivalent written in C. But it's much easier to read, much less
error-prone, and still process 1GB image under 1s (CPU time, leaving
along actual disk reads). So, it's acceptable.
Old backup metadata (old qubes.xml) does not contain info about
individual volume sizes. So, extract it from tar header (using verbose
output during restore) and resize volume accordingly.
Without this, restoring volumes larger than default would be impossible.
To ease all this, rework restore workflow: first create QubesVM objects,
and all their files (as for fresh VM), then override them with data
from backup - possibly redirecting some files to new location. This
allows generic code to create LVM volumes and then only restore its
content.
1. Add a helper function on vm.storage. This is equivalent of:
vm.storage.get_pool(vm.volumes[name]).export(vm.volumes[name])
2. Make sure the path returned by `export` on LVM volume is accessible.
First part - handling firewall.xml and rules formatting.
Specification on https://qubes-os.org/doc/vm-interface/
TODO (for dom0):
- plug into QubesVM object
- expose rules in QubesDB (including reloading)
- drop old functions (vm.get_firewall_conf etc)
QubesOS/qubes-issues#1815
Instead of excerpt from /proc/meminfo, use just one integer. This make
qmemman handling much easier and ease implementation for non-Linux OSes
(where /proc/meminfo doesn't exist).
For now keep also support for old format.
FixesQubesOS/qubes-issues#1312
There is no point in changing *public API* for just a change without any
better reason. It turned out most of those settings will be the same in
Qubes 4.0, so keep names the same.
This reverts commit 2d6ad3b60c.
QubesOS/qubes-issues#1812
This is migration of core2 commits:
commit d0ba43f253
Author: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Date: Mon Jun 6 02:21:08 2016 +0200
core: start guid as normal user even when VM started by root
Another attempt to avoid permissions-related problems...
QubesOS/qubes-issues#1768
commit 89d002a031
Author: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Date: Mon Jun 6 02:19:51 2016 +0200
core: use runuser instead of sudo for switching root->user
There are problems with using sudo in early system startup
(systemd-logind not running yet, pam_systemd timeouts). Since we don't
need full session here, runuser is good enough (even better: faster).
commit 2265fd3d52
Author: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Date: Sat Jun 4 17:42:24 2016 +0200
core: start qubesdb as normal user, even when VM is started by root
On VM start, old qubesdb-daemon is terminated (if still running). In
practice it happen only at VM startart (shutdown and quickly start
again). But in that case, if the VM was started by root, such operation
would fail.
So when VM is started by root, make sure that qubesdb-daemon will be
running as normal user (the first user in group 'qubes' - there should
be only one).
FixesQubesOS/qubes-issues#1745
Commit from core2:
commit 94d52a13e7
core: adjust guid parameters when running on KDE5
On KDE5 native decoration plugin is used and requires special properties
set (instead of `_QUBES_VMNAME` etc).
Special care needs to be taken when detecting environment, because
environment variables aren't good enough - this script may be running
with cleared environment (through sudo, or from systemd). So check
properties of X11 root window.
QubesOS/qubes-issues#1784
* core3-devices:
Fix core2migration and tests for new devices API
tests: more qubes.devices tests
qubes/ext/pci: implement pci-no-strict-reset/BDF feature
qubes/tools: allow calling qvm-device as qvm-devclass (like qvm-pci)
qubes: make pylint happy
qubes/tools: add qvm-device tool (and tests)
tests: load qubes.tests.tools.qvm_ls
tests: PCI devices tests
tests: add context manager to catch stdout
qubes/ext/pci: move PCI devices handling to an extension
qubes/devices: use more detailed exceptions than just KeyError
qubes/devices: allow non-persistent attach
qubes/storage: misc fixes for VM-exposed block devices handling
qubes: new devices API
FixesQubesOS/qubes-issues#2257
Instead of old per-VM flag 'pci_strictreset', now implement this as
per-device flag using features. To not fail on particular device
assignment set 'pci-no-strict-reset/DEVICE-BDF' to True. For
example 'pci-no-strict-reset/00:1b.0'.
QubesOS/qubes-issues#2257
Implement required event handlers according to documentation in
qubes.devices.
A modification of qubes.devices.DeviceInfo is needed to allow dynamic,
read-only properties.
QubesOS/qubes-issues#2257
Add 'backenddomain' element when source (not target) domain is not dom0.
Fix XML elemenet name. Actually set volume.domain when listing
VM-exposed devices.
QubesOS/qubes-issues#2256
Allow device plugin to list attached and available devices. Enforce
at API level every device being exposed by some domain.
This commit only changes devices API, but not update existing users
(pci) yet.
QubesOS/qubes-issues#2257
